Issue |
Section |
Title |
File |
Vol 7, No 1 (2016) |
Article |
Investigation of phase transitions in a system of Cd–Hg–Te solid solutions in a powerful laser radiation field |
|
Vol 7, No 1 (2016) |
Article |
Formation inhomogeneity of deformation martensite in rolled foil of Fe–28%Ni–5%Mo alloy under bending |
|
Vol 7, No 1 (2016) |
Article |
Rheological properties of system “elastomer binder–discrete carbon fiber” |
|
Vol 7, No 1 (2016) |
Article |
Strengthening of deformable bone cements in the calcium phosphates–chitosan system by tricalcium phosphate granules |
|
Vol 7, No 1 (2016) |
Article |
Reactivity of oxide matrix surface during atomic layer deposition |
|
Vol 7, No 1 (2016) |
Article |
Increase in strength of porous alumina ceramic by additives of aluminum oxide nanopowder |
|
Vol 7, No 1 (2016) |
Article |
Database on the bandgap of inorganic substances and materials |
|
Vol 7, No 1 (2016) |
Article |
Investigation of the structure and magnetic properties of metastable phases in Fe–B alloys melt spun |
|
Vol 7, No 1 (2016) |
Article |
Evolution of pore morphology in single-crystals of nickel-base superalloys |
|
Vol 7, No 1 (2016) |
Article |
Synthesis of polycrystalline cubic boron nitride from hexagonal boron nitride after mechanical activation and modification with aluminum |
|
Vol 7, No 1 (2016) |
Article |
Modification of isotactic polypropylene by additives of low-density polyethylene and powdered cellulose |
|
Vol 7, No 1 (2016) |
Article |
Deformation behavior features of composite of polystyrene with cesium sulfate filler during ultraviolet and X-ray irradiation |
|
Vol 7, No 1 (2016) |
Article |
Effect of hydrothermal influence on properties and microstructure of bioinert ceramic Yb–TZP |
|
Vol 7, No 1 (2016) |
Article |
Polyamides and polyester amides based on triarylmethane-type diamines |
|
Vol 7, No 1 (2016) |
Article |
Influence of nanoparticles of cesium sulfate and deformation on structure, vibration spectra, and luminescence of polystyrene |
|
Vol 7, No 1 (2016) |
Article |
A composite material based on Al2O3 dispersion-strengthened nickel aluminide |
|
Vol 7, No 1 (2016) |
Article |
Investigation of aluminum–copper bimetal-based intermetallide coating produced by contact melting method |
|
Vol 7, No 1 (2016) |
Article |
Study of the effect of composition on the microstructure and thermophysical properties of niobium-based refractory systems |
|
Vol 7, No 1 (2016) |
Article |
Study of heat and humidity effect on phthalonitrile matrix |
|
Vol 7, No 1 (2016) |
Article |
Enhancement of mechanical and tribotechnical properties of structural steel by electrical discharge machining |
|
Vol 7, No 1 (2016) |
Article |
Influence of polarizing current form on protective properties of plasma-sprayed electrolytic coating on alloy ML5 |
|
Vol 7, No 1 (2016) |
Article |
Peculiarities of isolated acoustic pulses generated for exerting influence on a treated material in liquid media |
|
Vol 7, No 1 (2016) |
Article |
Quantitative determination of content of magnetite and maghemite in their mixtures by X-ray diffraction methods |
|
Vol 7, No 1 (2016) |
Article |
Improvement of manufacture technology of nanostructured diamond materials with the use of physicochemical nonequilibrium analysis |
|
Vol 7, No 1 (2016) |
Article |
Study of NbSi composites reinforced by single-crystal fibers of α-Al2O3 with and without interfacial coating |
|
Vol 7, No 2 (2016) |
Physico-Chemical Principles of Materials Development |
Comparative analysis of microstructures formed in highly alloyed aluminum alloy during high-temperature equal-channel angular pressing and multidirectional forging |
|
Vol 7, No 2 (2016) |
Physico-Chemical Principles of Materials Development |
Simulation of the influence of the hot-pressing parameters and the mixture compositions in the ZrO2(m)–Al–C system on the hardness and the crack resistance of ceramics |
|
Vol 7, No 2 (2016) |
Physico-Chemical Principles of Materials Development |
Reinforcement of Al2O3–MgO composite materials by multiwalled carbon nanotubes |
|
Vol 7, No 2 (2016) |
Materials of Electronic |
Photorefractive properties of congruent lithium niobate crystals doped with zinc |
|
Vol 7, No 2 (2016) |
Materials of Electronic |
Thermoelectric figure of merit and magnetic field production abilities of “natural” PbBi2(Te1 − xSex)4 + δ and PbBi4(Te1 − xSex)7 + δ nanostructures |
|
Vol 7, No 2 (2016) |
Materials of Electronic |
Charge characteristics of MOS structure with thermal SiO2 films doped with phosphorus under high-field electron injection |
|
Vol 7, No 2 (2016) |
Materials of Power Engineering and Radiation-Resistant Materials |
Thermally stable carbon–oxygen complexes in irradiated silicon crystals |
|
Vol 7, No 2 (2016) |
Materials of Power Engineering and Radiation-Resistant Materials |
Application of thermally expanded graphite for the cementation of cesium- and tritium-containing waste oils |
|
Vol 7, No 2 (2016) |
Materials of Power Engineering and Radiation-Resistant Materials |
Effect of electron irradiation on the formation and healing of defects in carbon nanotubes |
|
Vol 7, No 2 (2016) |
Materials of Power Engineering and Radiation-Resistant Materials |
Kinetics of α’-phase nucleation during thermal aging of Fe–22% Cr alloy |
|
Vol 7, No 2 (2016) |
Materials of Power Engineering and Radiation-Resistant Materials |
Athermal laser annealing of cold-worked aluminum |
|
Vol 7, No 2 (2016) |
Materials for Ensuring Human Life Activity and Environment Protection |
Biodegradable porous scaffolds for the bone tissue regeneration |
|
Vol 7, No 2 (2016) |
Materials for Ensuring Human Life Activity and Environment Protection |
Modification of titanium medical agraffe surface for suturing instruments with microarc oxidation method |
|
Vol 7, No 2 (2016) |
Materials for Ensuring Human Life Activity and Environment Protection |
Magnetic affine sorbents for the isolation of recombinant proteins |
|
Vol 7, No 2 (2016) |
Materials for Ensuring Human Life Activity and Environment Protection |
3D printing of mineral-polymer structures based on calcium phosphate and polysaccharides for tissue engineering |
|
Vol 7, No 2 (2016) |
Methods of Materials Properties Analysis |
Structure, physical and mechanical properties, and fracture of hot consolidate Al–Ti, Al–Ti–Si powder composites |
|
Vol 7, No 2 (2016) |
Methods of Materials Properties Analysis |
Influence of nanosize particles and methods of mixing on mechanical abilities of SP-70 powder steel |
|
Vol 7, No 2 (2016) |
Methods of Materials Properties Analysis |
The magnetic behavior and mechanical properties of low resistance joints of GdBa2Cu3O7 − δ 2G tapes |
|
Vol 7, No 2 (2016) |
Methods of Materials Properties Analysis |
Phase composition, structure, and magnetic properties of Fe–Zr–N films produced by magnetron sputtering of heated target |
|
Vol 7, No 2 (2016) |
New Technologies for Obtaining and Processing Materials |
Autoclave leaching of boehmite-kaolinite bauxites by hydrochloric acid |
|
Vol 7, No 2 (2016) |
New Technologies for Obtaining and Processing Materials |
Zirconia-based solid electrolyte obtained by tape casting |
|
Vol 7, No 2 (2016) |
New Technologies for Obtaining and Processing Materials |
Formation of thin catalytic WSex layer on graphite electrodes for activation of hydrogen evolution reaction in aqueous acid |
|
Vol 7, No 2 (2016) |
New Technologies for Obtaining and Processing Materials |
New hydrophobic materials based on poly(tetrafluoroethylene-co-vinylidene fluoride) fiber |
|
Vol 7, No 2 (2016) |
New Technologies for Obtaining and Processing Materials |
Explosive cladding of the inner side of a steel tube with a heat-resistant niobium alloy |
|
Vol 7, No 2 (2016) |
New Technologies for Obtaining and Processing Materials |
Synthesis of micron particles with Fe–Fe4N core–shell structure at low-temperature gaseous nitriding of iron powder in a stream of ammonia |
|
Vol 7, No 2 (2016) |
Methods of Investigating the Properties of Materials |
Forms of presence and contents of light elements in finely divided Nb3Al powders |
|
Vol 7, No 3 (2016) |
Effects of Energy Fluxes on Materials |
Statistical theory of diffusion of a hydrogen atom in metals with close-packed lattice taking into account fourth-order anharmonicity |
|
Vol 7, No 3 (2016) |
Effects of Energy Fluxes on Materials |
Pulsed ion beam induced changes in a submicrocrystalline structure of the near surface layers of austenite steel |
|
Vol 7, No 3 (2016) |
Effects of Energy Fluxes on Materials |
Damage of Al2O3 ceramics under the action of pulsed ion and plasma fluxes and laser irradiation |
|
Vol 7, No 3 (2016) |
Effects of Energy Fluxes on Materials |
Modification of the structure and properties of tin–fullerite films irradiated by boron ions |
|
Vol 7, No 3 (2016) |
Plasma Chemical Methods of Production and Treatment of Materials |
Equilibrium energy and technological characteristics of plasma synthesis of titanium nitride, carbide, and carbonitride from titanium tetrachloride |
|
Vol 7, No 3 (2016) |
Plasma Chemical Methods of Production and Treatment of Materials |
Effect of plasma processes of coating formation on the structure and mechanical properties of titanium |
|
Vol 7, No 3 (2016) |
Plasma Chemical Methods of Production and Treatment of Materials |
Plasma dynamic synthesis of ultradisperse copper oxide under atmospheric conditions |
|
Vol 7, No 3 (2016) |
Plasma Chemical Methods of Production and Treatment of Materials |
Effect of electromechanical treatment on the structure and microhardness of plasma coating from Cr–Mn steel |
|
Vol 7, No 3 (2016) |
Plasma Chemical Methods of Production and Treatment of Materials |
An investigation of thermal conductivity of ceramic plasma coatings sprayed with plated powders |
|
Vol 7, No 3 (2016) |
Functional Coating and Surface Treatment |
Structure and shear strength of implants with plasma coatings |
|
Vol 7, No 3 (2016) |
Functional Coating and Surface Treatment |
Physical and mechanical properties of (Ti–Zr–Nb)N coatings fabricated by vacuum-arc deposition |
|
Vol 7, No 3 (2016) |
Composite Materials |
Composite granules of tin-based alloy |
|
Vol 7, No 3 (2016) |
Composite Materials |
Multilayer Mg–Ti-based composites produced by explosion welding: Risk zones |
|
Vol 7, No 3 (2016) |
New Methods of Treatment and Production of Materials with Required Properties |
A model of uranium dioxide thermal conductivity |
|
Vol 7, No 3 (2016) |
New Methods of Treatment and Production of Materials with Required Properties |
Production of superhard corundum under spark-plasma sintering of aluminum oxide nanopowders |
|
Vol 7, No 3 (2016) |
New Methods of Treatment and Production of Materials with Required Properties |
Preparation, structure, and properties of porous materials based on titanium |
|
Vol 7, No 3 (2016) |
New Methods of Treatment and Production of Materials with Required Properties |
Influence of preliminary mechanical activation conditions on thermal explosion characteristics of the titanium–nickel powder system |
|
Vol 7, No 3 (2016) |
New Methods of Treatment and Production of Materials with Required Properties |
The effect of the ultrasound treatment on the structure of carbon nanotubes in polymer nanocomposites |
|
Vol 7, No 3 (2016) |
New Methods of Treatment and Production of Materials with Required Properties |
Influence of gravitational and vibrational convection on the heat and mass transfer in the melt during crystal growth by the bridgman and floating zone methods |
|
Vol 7, No 3 (2016) |
New Methods of Treatment and Production of Materials with Required Properties |
Oxidation state and local environment of iron and hydrolytic stability of multicomponent aluminum-iron-phosphate glasses for immobilization of high-level waste |
|
Vol 7, No 4 (2016) |
Article |
Features of temperature dependence of electrical conductivity in multicomponent organic spin glasses |
|
Vol 7, No 4 (2016) |
Article |
Interaction effects of alkaline and acid electrolytes with intermetallic γ’-phase on surface of nickel superalloys |
|
Vol 7, No 4 (2016) |
Article |
Aging processes in low-alloy bronzes after equal-channel angular pressing |
|
Vol 7, No 4 (2016) |
Article |
Structure and properties of films based on blends of polyamide–polyhydroxybutyrate |
|
Vol 7, No 4 (2016) |
Article |
Manufacture of composites based on aluminum and shungite under high pressure conditions |
|
Vol 7, No 4 (2016) |
Article |
Consolidation and properties of some powder materials at the example of PA-ZhGrDZ and PK10M alloys |
|
Vol 7, No 4 (2016) |
Article |
Hydroxyapatite-based coatings for intraosteal implants |
|
Vol 7, No 4 (2016) |
Article |
Strengthening of bone cements based on tribasic calcium phosphate by calcium carbonate granules |
|
Vol 7, No 4 (2016) |
Article |
Investigation of hydrogen interaction with magnetic materials of Nd–Fe–B type by calorimetry method |
|
Vol 7, No 4 (2016) |
Article |
Phase composition of melt-quenched carbon doped tungsten silicides |
|
Vol 7, No 4 (2016) |
Article |
Metal nanoparticles and quantum dots as photosensitizers of solar cell batteries |
|
Vol 7, No 4 (2016) |
Article |
Synthesis of aluminum oxynitride (AlON) and study of the properties of ceramics based on it |
|
Vol 7, No 4 (2016) |
Article |
Electronic energy-band structures of covalent atomic and partly ion wires ANB8–N |
|
Vol 7, No 4 (2016) |
Article |
Diagnostics of fracture mechanisms of structural steels by acoustic emission |
|
Vol 7, No 4 (2016) |
Article |
Development of SLZhS32 BR economically doped heat-resistant alloy with single-crystal structure |
|
Vol 7, No 4 (2016) |
Article |
Structure and mechanical properties of three-dimensional capillary-porous titanium coatings on intraosteal implants |
|
Vol 7, No 4 (2016) |
Article |
Synthesis and tribotechnical properties of composite coatings with PM–DADPE polyimide matrix and fillers of tungsten dichalcogenide nanoparticles upon dry sliding friction |
|
Vol 7, No 4 (2016) |
Article |
Design concept of multifunctional layered composite materials for operation in arctic regions |
|
Vol 7, No 4 (2016) |
Article |
Influence of processing conditions of poly(ethylene terephthalate)–poly(butylene terephthalate) blends on the dimension of their structure formation space |
|
Vol 7, No 4 (2016) |
Article |
Physical and mechanical properties of Fe–Cr–V damping corrosion-resistant alloys |
|
Vol 7, No 4 (2016) |
Article |
Investigation of SLZhS32 BR economically doped heat-resistant alloy with single-crystal structure |
|
Vol 7, No 4 (2016) |
Article |
Corrosion resistance improvement of 30XGCN2A steel by ion implantation using cathodes based on immiscible components |
|
Vol 7, No 4 (2016) |
Article |
Highly porous cellular materials: A statistical model of geometric structure |
|
Vol 7, No 4 (2016) |
Article |
Homogenization conditions and mechanical properties of ingots of calcium-doped AV alloy |
|
Vol 7, No 4 (2016) |
Article |
Composite metal-ceramic heterostructure for membranes of deep purification of hydrogen |
|
Vol 7, No 4 (2016) |
Article |
A radio absorbing composite material based on compounded rubber and modified nonwoven fabric |
|
Vol 7, No 4 (2016) |
Article |
Complex organomineral additive for blended portland cement |
|
Vol 7, No 4 (2016) |
Article |
Analysis of dispersion hardening of nickel-based alloys |
|
Vol 7, No 4 (2016) |
Article |
Study of structural features, strength properties, and heat resistance of a dispersion-hardened composite material based on nickel intermetallide |
|
Vol 7, No 4 (2016) |
Article |
Influence of manufacturing conditions of carbonitriding on formation of surface layers and protective properties of hot-work structural steel |
|
Vol 7, No 4 (2016) |
Article |
Analysis of microplastic deformation processes of surface layers of nitrided structural steels |
|
Vol 7, No 4 (2016) |
Article |
Low-temperature oxidation of MoSi2–Si3N4 composites |
|
Vol 7, No 4 (2016) |
Article |
Investigation of physicochemical and biological properties of composite matrices in a alginate–calcium phosphate system intended for use in prototyping technologies during replacement of bone defects |
|
Vol 7, No 4 (2016) |
Article |
Ceramics based on calcium phosphate powder synthesized from calcium saccharate and ammonium hydrophosphate |
|
Vol 7, No 4 (2016) |
Erratum |
Erratum to: “Synthesis of micron particles with Fe–Fe4N core–shell structure at low-temperature gaseous nitriding of iron powder in a stream of ammonia” |
|
Vol 7, No 5 (2016) |
Physico-Chemical Principles of Materials Development |
“Thick” amorphous wires in the Fe75Si10B15–Co75Si10B15–Ni75Si10B15 system: Fabrication, structure, properties |
|
Vol 7, No 5 (2016) |
Physico-Chemical Principles of Materials Development |
MD simulation of primary radiation damage in metals with internal structure |
|
Vol 7, No 5 (2016) |
Physico-Chemical Principles of Materials Development |
Synthesis and study of solid solutions based on indium oxide in the In2O3–ZrO2(HfO2) systems as a material for fuel cell interconnectors |
|
Vol 7, No 5 (2016) |
Physico-Chemical Principles of Materials Development |
Influence of low-temperature plasma and γ radiation on the surface properties of PET track membranes |
|
Vol 7, No 5 (2016) |
Physico-Chemical Principles of Materials Development |
Modification of the ferrous and nonferrous metals in the process of pinch discharges in the water vapor |
|
Vol 7, No 5 (2016) |
Materials of Aircraft and Space Engineering |
Structure and strength properties of the cold-deformed Al–Mg2Si-based alloys with additives of transition metals |
|
Vol 7, No 5 (2016) |
Materials of Aircraft and Space Engineering |
Powder aluminum composites of Al–Cu system with micro-additions of oxide nanoparticles |
|
Vol 7, No 5 (2016) |
Materials for Electronics |
Effect of charge mixture preparation technology on the physicochemical and optical properties of LiNbO3:Mg crystals |
|
Vol 7, No 5 (2016) |
Materials for Electronics |
Aging of rapidly solidified eutectic alloys Sn–Bi, Sn–Pb, and Bi–Cd |
|
Vol 7, No 5 (2016) |
Materials of Power Engineering and Radiation-Resistant Materials |
Kinetics of α’-phase growth and coagulation under thermal aging of Fe–22% Cr alloy |
|
Vol 7, No 5 (2016) |
Materials of Power Engineering and Radiation-Resistant Materials |
Influence of technological defects and neutron irradiation on the mechanical properties of single-crystal molybdenum pipes |
|
Vol 7, No 5 (2016) |
Materials of Power Engineering and Radiation-Resistant Materials |
Effect of power pulses of deuterium plasma on the structure and mechanical properties of chromium steel |
|
Vol 7, No 5 (2016) |
Materials of Power Engineering and Radiation-Resistant Materials |
Radiation resistance of structural radiation-protective composite material based on magnetite matrix |
|
Vol 7, No 5 (2016) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Modified composites of Al2O3–(Ce-TZP) system as materials for medical use |
|
Vol 7, No 5 (2016) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Radiation-chemical synthesis of silver nanoparticles in aqueous solution of chitin derivative |
|
Vol 7, No 5 (2016) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Assessment of the chemical risk factor for application of artificial cardiac pacemakers equipped with a head made of thermoplastic polyurethane compound |
|
Vol 7, No 5 (2016) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Projection stereolithography of biocompatible polymer structures |
|
Vol 7, No 5 (2016) |
General Purpose Materials |
Effect of annealing on the structure and phase transformation in ZrO2–MgO ceramic powders |
|
Vol 7, No 5 (2016) |
General Purpose Materials |
High-temperature electrical conductivity of GdxTiyZrzCe1–x–y–zO2 solid solutions |
|
Vol 7, No 5 (2016) |
General Purpose Materials |
Embrittlement mechanisms and magnetic properties optimization conditions in amorphous Co69Ge3.7Cr3.8Si12.5B11 alloy without ductile-brittle transition |
|
Vol 7, No 5 (2016) |
General Purpose Materials |
Fireproof foamed epoxy polymers |
|
Vol 7, No 5 (2016) |
General Purpose Materials |
Special features of surface fluorination of thermoplastic polyurethane elastomers and its effect on the polymer properties |
|
Vol 7, No 5 (2016) |
Modern Technologies of Preparation and Processing of Materials |
Physicochemical studies on the thermal hydrolysis of aluminum chloride |
|
Vol 7, No 5 (2016) |
Modern Technologies of Preparation and Processing of Materials |
Modification of a hard alloy cermet structure upon pulsed electron-ion-plasma irradiation |
|
Vol 7, No 5 (2016) |
Modern Technologies of Preparation and Processing of Materials |
Autowave synthesis of cast oxide ceramics Al2O3–Cr2O3 · ZrO2 |
|
Vol 7, No 5 (2016) |
Modern Technologies of Preparation and Processing of Materials |
Deposition of multicomponent filmlike coating on metal substrate using plasma focus device |
|
Vol 7, No 5 (2016) |
Methods for Investigation of Material Properties |
Determination of the surface structure peculiarities of nanoscale metal particles via small-angle X-ray scattering |
|
Vol 7, No 6 (2016) |
Metal Science. Metallurgy |
Structure and properties of two-layer clad steel used in arctic vessel hull building |
|
Vol 7, No 6 (2016) |
Metal Science. Metallurgy |
Segregation of alloying elements in directionally solidified Re–Ru-containing Ni-based superalloys |
|
Vol 7, No 6 (2016) |
Metal Science. Metallurgy |
Phase and structural transformations in heat resistant intermetallide nickel-based alloy |
|
Vol 7, No 6 (2016) |
Functional and Polymer Composite Materials |
The structure and composition of samples made of carbon-fiber-reinforced plastic KMU-4l exposed for 12 years on the exterior surface of the International Space Station: 1. Macrostructure and surface composition |
|
Vol 7, No 6 (2016) |
Functional and Polymer Composite Materials |
The structure and composition of samples made of carbon-fiber-reinforced plastic KMU-4l exposed for 12 years on the exterior surface of the International Space Station: 2. Microstructure and surface composition |
|
Vol 7, No 6 (2016) |
Functional and Polymer Composite Materials |
Creation of composite nanostructured surface-reinforced powder materials based on Ti/WC and Ti/TiCN used for coatings with enhanced hardness |
|
Vol 7, No 6 (2016) |
Functional and Polymer Composite Materials |
Aluminum matrix functional coatings with high microhardness on the basis of Al–Sn + Al2O3 composite powders fabricated by cold gas dynamic spraying |
|
Vol 7, No 6 (2016) |
Functional and Polymer Composite Materials |
Long-measuring cast microwires in glass insulation with a strand from intermetallic compounds |
|
Vol 7, No 6 (2016) |
Welding and Related Processes. Welding Materials and Technologies |
Laser welding of cold-resistant steels applied for arctic ship structures |
|
Vol 7, No 6 (2016) |
Welding and Related Processes. Welding Materials and Technologies |
Welding of high-strength titanium alloys of large thicknesses for use in marine environments |
|
Vol 7, No 6 (2016) |
Welding and Related Processes. Welding Materials and Technologies |
Phenomenological model of crystallization center nucleation in metal melt during welding under the influence of ultrafine refractory components |
|
Vol 7, No 6 (2016) |
Corrosion and Protection of Metals |
Corrosion resistance problems of low-magnetic shipbuilding steels |
|
Vol 7, No 6 (2016) |
Corrosion and Protection of Metals |
Effect of cathodic polarization on mechanical characteristics of high-strength nitrogen-containing steel in seawater |
|
Vol 7, No 6 (2016) |
Corrosion and Protection of Metals |
Examples of corrosion cracking in Cr18Ni10Ti steel caused by residual stresses at bends and pittings |
|
Vol 7, No 6 (2016) |
Structural–Technological Strenghts and Working Capacity of Materials |
Studies on the cyclic crack resistance of high-strength steels for assessing the service life of deep-sea equipment |
|
Vol 7, No 6 (2016) |
Structural–Technological Strenghts and Working Capacity of Materials |
Formulation of criteria and reasoning procedure for the safe operation of pipelines and FBR housings under conditions of sodium leakage via through crack and its combustion |
|
Vol 7, No 6 (2016) |
Structural–Technological Strenghts and Working Capacity of Materials |
Initial data and criteria for the reasoning procedure for the safe operation of pipelines and housing of equipment of FBR under conditions of sodium leakage via through crack and its combustion |
|
Vol 7, No 6 (2016) |
Radiation Material Science |
Assessment of the crack growth rate in the material of the VVER-1000 reactor internals under irradiation creep |
|
Vol 8, No 6 (2017) |
Structural–Technological Strenghts and Working Capacity of Materials |
On calculation of the contour size of the J-integral for assessment of the structural integrity of the VVER reactor pressure vessels under emergency core cooling |
|
Vol 8, No 1 (2017) |
Article |
Microstructure evolution of titanium alloy VT8М-1 with globular-lamellar structure during deformation in temperature range of 650–800°С |
|
Vol 8, No 1 (2017) |
Article |
Evolution of polymer matrix structure in carbon-fiber-reinforced plastic based on polycyanurate and polyarylsulfone during accelerated climatic tests |
|
Vol 8, No 1 (2017) |
Article |
Influence of microalloying with rare earth metals and production technology of structural intermetallide alloy based on nickel aluminide on alloy properties |
|
Vol 8, No 1 (2017) |
Article |
Glycolates and cellosolvates of metals as prospective materials for production of oxide powders and thin-film coatings |
|
Vol 8, No 1 (2017) |
Article |
Defects of heat-resistant alloys synthesized by the method of selective laser melting |
|
Vol 8, No 1 (2017) |
Article |
Synthesis and dry sliding behavior of composite coating with (R–OOO)FT polyimide matrix and tungsten disulfide nanoparticle filler |
|
Vol 8, No 1 (2017) |
Article |
Wetting of Ag, Au, and BeO by melts of B2O3 and B2O3 + PbO |
|
Vol 8, No 1 (2017) |
Article |
Features of surface preparation for nondestructive X-ray diagnostics of the stress state of railway metal critical parts |
|
Vol 8, No 1 (2017) |
Article |
Composite hydrogels based on alginate-reinforced calcium phosphate ceramics for tissue engineering |
|
Vol 8, No 1 (2017) |
Article |
The electrical properties of Cu2Se + Cu2O composites |
|
Vol 8, No 1 (2017) |
Article |
Composite coatings based on A–OOO polyimide and WS2 nanoparticles with enhanced dry sliding characteristics |
|
Vol 8, No 1 (2017) |
Article |
Investigations of variations in surface state of polymer films under structural rearrangements in air and during contact with water |
|
Vol 8, No 1 (2017) |
Article |
Fractal analysis of fracture of powder metallurgical hard alloy |
|
Vol 8, No 1 (2017) |
Article |
Composite coatings with refractory metal matrix reinforced with nanodispersed metal-ceramic component |
|
Vol 8, No 1 (2017) |
Article |
Study of liquid-phase sintering of materials based on zirconium dioxide containing alumina |
|
Vol 8, No 1 (2017) |
Article |
Relaxation transitions in polyvinyl alcohol and porous polyvinyl formals |
|
Vol 8, No 1 (2017) |
Article |
Influence of sulfur on heat resistance of single crystals of heat-resistant nickel alloy of Ni–Al–Co–Re–Ta–Mo–W–Ru–Cr system |
|
Vol 8, No 1 (2017) |
Article |
Influence of tensile stresses on the corrosion resistance of titanium alloy VT22 in aqueous solution of NaCl |
|
Vol 8, No 1 (2017) |
Article |
Phase composition and grain structure of quick-hardening alloy Pb–13 wt % Sb |
|
Vol 8, No 1 (2017) |
Article |
Influence of coherence violation on growth of γ′-phase particles in heat-resistant nickel alloys |
|
Vol 8, No 1 (2017) |
Article |
New tribological composites based on polytetrafluoroethylene |
|
Vol 8, No 1 (2017) |
Article |
Formation and investigation of composite material silver–nitinol for medical purposes |
|
Vol 8, No 1 (2017) |
Article |
Calcium pyrophosphate powder for production of bioceramics synthesized from pyrophosphoric acid and calcium acetate |
|
Vol 8, No 1 (2017) |
Article |
On friction of metallic materials with consideration for superplasticity phenomenon |
|
Vol 8, No 1 (2017) |
Article |
Effect of plasma electrolytic nitrocarburizing on phase composition of 0.3C-1Mn-1Si-Fe steel |
|
Vol 8, No 1 (2017) |
Article |
Influence of ripening in mother solution on characteristics of magnesium-substituted calcium phosphate powders |
|
Vol 8, No 1 (2017) |
Article |
Structure and properties of nitrile-butadiene rubber filled with carbon and basalt fibers |
|
Vol 8, No 1 (2017) |
Article |
Decrease in extraction rate of poly(vinyl chloride) plasticizing agent in case of addition of nanofiller |
|
Vol 8, No 1 (2017) |
Article |
Temperature distribution and structure in the heat-affected zone for steel sheets after laser cutting |
|
Vol 8, No 1 (2017) |
Article |
Colloidal forming of chemically bonded calcium phosphate composites |
|
Vol 8, No 1 (2017) |
Article |
Influence of cobalt alloying on structure and long-term strength of Al–Cu–Mg–Ag alloy system |
|
Vol 8, No 1 (2017) |
Article |
Properties of thin films of tungsten sulfide and copper sulfide produced by magnetron sputtering method |
|
Vol 8, No 1 (2017) |
Article |
Electroluminescence and electron–hole mobility of 6,12-di(thien-2-il)indolo[3,2-b]carbazoles |
|
Vol 8, No 1 (2017) |
Article |
Properties and phase transformations progressing in complex alloyed stainless austenitic steel upon heating |
|
Vol 8, No 1 (2017) |
Article |
Preparation of a new sorption material based on modified shungite |
|
Vol 8, No 1 (2017) |
Article |
Crystal phase formation in colored leucite-reinforced glass-ceramics for dental restorations |
|
Vol 8, No 2 (2017) |
Physicochemical Principles of Design of Materials and Technologies |
Pulsed laser deposition and characterization of nanostructured thin films based on Mo(Ni)Sex and amorphous carbon phase as electrocatalysts for hydrogen evolution reaction |
|
Vol 8, No 2 (2017) |
Physicochemical Principles of Design of Materials and Technologies |
Intensification of processes of electrodeposition of metals by use of various modes of pulse electrolysis |
|
Vol 8, No 2 (2017) |
Materials of Aeronautic and Space Engineering |
Laminated metal-polymeric materials in structural elements of aircraft |
|
Vol 8, No 2 (2017) |
Materials of Aeronautic and Space Engineering |
Numerical simulation of metrological characteristics of cosmic radiation detectors |
|
Vol 8, No 2 (2017) |
Materials for Electronics Technology |
Comparison of the basic physical and chemical properties of complex oxides LiNixMnyCo1–x–yO2 (0.3 ≤ x ≤ 0.6; 0.2 ≤ y ≤ 0.4) obtained by different methods |
|
Vol 8, No 2 (2017) |
Materials for Electronics Technology |
Preparation of the Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte with high ionic conductivity |
|
Vol 8, No 2 (2017) |
Materials for Electronics Technology |
Obtaining and electrical properties of ceramics based on mixed niobium and tantalum pentoxide Nb2(1–y)Ta2yO5 |
|
Vol 8, No 2 (2017) |
Materials of Power Engineering and RadiationResistant Materials |
Composite materials based on oxides of d and f elements and carbon layers |
|
Vol 8, No 2 (2017) |
Materials of Power Engineering and RadiationResistant Materials |
Effect of oxygen impurity in sodium–potassium melt on the corrosion processes at the interface between vanadium alloy and eutectic melt |
|
Vol 8, No 2 (2017) |
Materials of Power Engineering and RadiationResistant Materials |
Structural transformations in Al85Ni7Fe4La4 alloy under carbon ion irradiation |
|
Vol 8, No 2 (2017) |
Materials of Power Engineering and RadiationResistant Materials |
Attenuation of photon and neutron radiation using iron–magnetite–serpentinite radiation-protective composite |
|
Vol 8, No 2 (2017) |
Materials of Power Engineering and RadiationResistant Materials |
Microstructure of Ti–5Al–4V–2Zr alloy in the initial condition and after irradiation with titanium ions |
|
Vol 8, No 2 (2017) |
Materials for Support of Human Activity and Environmental Protection |
Thermal extrusion three-dimensional printing of copolymer polyethylene glycol and poly-ε-caprolactone matrix structures |
|
Vol 8, No 2 (2017) |
Materials for Support of Human Activity and Environmental Protection |
Brushite cement based on β-TCP for orthopedics |
|
Vol 8, No 2 (2017) |
Materials for Support of Human Activity and Environmental Protection |
The shear strength of Ti–HA composite coatings for intraosseous implants |
|
Vol 8, No 2 (2017) |
General Purpose Materials |
Adhesive properties of carbon 1D nanostructures in elastomeric composition |
|
Vol 8, No 2 (2017) |
General Purpose Materials |
Phase composition and defect substructure of double surfacing, formed with V–Cr–Nb–W powder wire on steel |
|
Vol 8, No 2 (2017) |
General Purpose Materials |
Kinetic analysis of the oxidation of Nb–Si eutectic alloy doped with boron |
|
Vol 8, No 2 (2017) |
General Purpose Materials |
Atomic structure of gold nanoparticles stabilized in polyethylene |
|
Vol 8, No 2 (2017) |
New Methods of Production and Treatment of Materials |
Structure and properties of steel produced by metal injection molding |
|
Vol 8, No 2 (2017) |
New Methods of Production and Treatment of Materials |
Production of antifriction composite filler rods based on babbit B83 by extrusion |
|
Vol 8, No 2 (2017) |
New Methods of Production and Treatment of Materials |
Shock-wave treatment of tungsten/fluoropolymer powder compositions |
|
Vol 8, No 2 (2017) |
New Methods of Production and Treatment of Materials |
High-temperature oxidation of nickel using oxidative constructing approach |
|
Vol 8, No 2 (2017) |
New Methods of Production and Treatment of Materials |
Influence of heat treatment parameters on the structure and mechanical properties of a titanium VT6 alloy in the submicrocrystalline state |
|
Vol 8, No 3 (2017) |
Effects of Energy Fluxes on Materials |
Effects of impurities on the rate of radiation creep and vacancy swelling in Fe-based austenite alloys |
|
Vol 8, No 3 (2017) |
Effects of Energy Fluxes on Materials |
Laser-plasma sources of ionizing radiation for simulation of radiation effects in microelectronic materials and components |
|
Vol 8, No 3 (2017) |
Effects of Energy Fluxes on Materials |
Effect of ion polishing on corrosion resistance of the cladding of fuel elements from E110 alloy in the steam water environment |
|
Vol 8, No 3 (2017) |
Effects of Energy Fluxes on Materials |
Changes in the characteristics of the fine structure of the ChS-68 steel under neutron irradiation |
|
Vol 8, No 3 (2017) |
Effects of Energy Fluxes on Materials |
Radiation-induced changes in the structure and mechanical properties of Fe–Mo alloy under electron irradiation |
|
Vol 8, No 3 (2017) |
Effects of Energy Fluxes on Materials |
Influence of cyclic laser pulses on degradation of a tantalum coating |
|
Vol 8, No 3 (2017) |
Effects of Energy Fluxes on Materials |
Texture formation in the surface layer of VT6 alloy targets irradiated by intense pulsed electron beams |
|
Vol 8, No 3 (2017) |
Plasmochemical Methods of Production and Treatment of Materials |
Investigation of the effect of a low-temperature plasma of vapor–gas discharges with the use of electrolytic electrodes at lower pressure on products of complex shape |
|
Vol 8, No 3 (2017) |
Plasmochemical Methods of Production and Treatment of Materials |
Effect of the opening angle of the gas-discharge path on the power efficiency of a plasmatron |
|
Vol 8, No 3 (2017) |
Plasmochemical Methods of Production and Treatment of Materials |
Qualitative study of steel cutting with the use of the narrow jet plasma technology |
|
Vol 8, No 3 (2017) |
Plasmochemical Methods of Production and Treatment of Materials |
Thermochemical plasma-arc treatment of leucoxene concentrate |
|
Vol 8, No 3 (2017) |
Plasmochemical Methods of Production and Treatment of Materials |
The influence of a powerful stream of deuterium ions and deuterium plasma on the structural state of the surface layer of titanium |
|
Vol 8, No 3 (2017) |
Plasmochemical Methods of Production and Treatment of Materials |
Small-angle X-ray scattering investigation of carbon- and titanium-containing nano- and microparticles deposited from an arc-discharge low-temperature plasma |
|
Vol 8, No 3 (2017) |
Functional Coatings and Surface Treatment |
Elemental and phase composition of TiB2–Mo coating sprayed on a steel by electro-explosive method |
|
Vol 8, No 3 (2017) |
Functional Coatings and Surface Treatment |
Tribological properties of Babbitt alloy coatings modified with carbon nanotubes |
|
Vol 8, No 3 (2017) |
Functional Coatings and Surface Treatment |
Elastic stresses and microstructure of TiAlN coatings |
|
Vol 8, No 3 (2017) |
Functional Coatings and Surface Treatment |
The boundary between the hydroxyapatite coating and titanium substrate |
|
Vol 8, No 3 (2017) |
Composite Materials |
Production of spherical powders on the basis of group IV metals for additive manufacturing |
|
Vol 8, No 3 (2017) |
Composite Materials |
Structural characteristics of a mechanically alloyed Al–Fe powder composite |
|
Vol 8, No 3 (2017) |
Composite Materials |
Chromium concentration profiles in vacuum-sintered Fe–Cr–Co alloys |
|
Vol 8, No 3 (2017) |
Composite Materials |
The influence of iron powder cladding with nickel on properties of sintered materials |
|
Vol 8, No 3 (2017) |
New Methods of Treatment and Production of Materials with Required Properties |
Deagglomeration of nanostructured aluminum oxyhydroxide upon shock wave impact of electrohydraulic discharge |
|
Vol 8, No 3 (2017) |
New Methods of Treatment and Production of Materials with Required Properties |
The form of the existence of Al in Fe–Sn melts with exogenous nanoparticles of refractory oxides |
|
Vol 8, No 3 (2017) |
New Methods of Treatment and Production of Materials with Required Properties |
Application of thermal analysis technique for development of technology of melt preparation to obtain “thick” amorphous Co-alloy microwires |
|
Vol 8, No 4 (2017) |
Article |
Prediction of corrosive characteristics of high-nitrogen austenite steels based on correlation equation of pitting potential |
|
Vol 8, No 4 (2017) |
Article |
Polymorphism of 2D monolayer J-aggregates of cyanine dyes |
|
Vol 8, No 4 (2017) |
Article |
Investigation of phase boundaries in composition materials based on Nb–Si eutectics reinforced by monocrystal fibers of α-Al2O3 with Mo coating |
|
Vol 8, No 4 (2017) |
Article |
Application of generalized pascal triangle for description of oscillations of friction forces |
|
Vol 8, No 4 (2017) |
Article |
Microwave properties of FeCo–SiO2 systems obtained by high-energy milling |
|
Vol 8, No 4 (2017) |
Article |
Formation and evolution of the structure and phase composition of stainless steel during electron-beam treatment and multiple-cycle fatigue |
|
Vol 8, No 4 (2017) |
Article |
Compaction of hydroxyapatite nanopowders by hydrostatic pressing |
|
Vol 8, No 4 (2017) |
Article |
Influence of hydrogen embrittlement on the localization of plastic strain in Al–Cu–Mg alloy |
|
Vol 8, No 4 (2017) |
Article |
Relationship of microstructural criteria of fracture and evolution of metal surface and physicochemical properties of medium at friction |
|
Vol 8, No 4 (2017) |
Article |
Fabrication of nickel–aluminum alloys with tungsten and molybdenum borides by the method of self-propagating high-temperature synthesis |
|
Vol 8, No 4 (2017) |
Article |
Nanostructured compacts and composites based on diamond-like boron nitride |
|
Vol 8, No 4 (2017) |
Article |
The influence of microadditives of ruthenium on the structure, corrosive-mechanical strength, and fractography of destruction of pseudo-alpha-titanium alloys |
|
Vol 8, No 4 (2017) |
Article |
Effect of the grain size on accumulation of scalar density of dislocations and its components in low-alloy Cu–Al |
|
Vol 8, No 4 (2017) |
Article |
Estimation of the high cycle fatigue behavior and type of fatigue failure of the VKS-180 high-resistance steel |
|
Vol 8, No 4 (2017) |
Article |
On Obtaining sharp cubic texture in thin tapes made of binary alloys of copper with yttrium and titanium |
|
Vol 8, No 4 (2017) |
Article |
X-ray investigation of the powders of tricalcium phosphate exposed to processing in planetary mill |
|
Vol 8, No 4 (2017) |
Article |
Study of the influence of a corrosive medium on the process of damage accumulation and the nature of failure of structural aluminum alloys 1441 and V-1469 under tensile and low-cycle fatigue testing |
|
Vol 8, No 4 (2017) |
Article |
Impact of the phase composition and structural state on the corrosion and mechanical strength of titanium alloys of the pseudo-β class |
|
Vol 8, No 4 (2017) |
Article |
High-temperature composites based on the Nb–Si system reinforced with niobium silicides |
|
Vol 8, No 4 (2017) |
Article |
Physical and mechanical properties of composite materials on the basis of an ice matrix |
|
Vol 8, No 4 (2017) |
Article |
ZrO2–Y2O3 ceramic composite modified by multilayered graphene |
|
Vol 8, No 4 (2017) |
Article |
Study of the structure and properties of heat-resistant alloys based on titanium aluminides with gadolinium microadditives |
|
Vol 8, No 5 (2017) |
Physico-Chemical Principles of Materials Development |
Some problems of hydrogen in reactor structural materials: A review |
|
Vol 8, No 5 (2017) |
Physico-Chemical Principles of Materials Development |
Obtaining of specified effective mechanical, thermal, and electrical characteristics of composite filled with dispersive materials |
|
Vol 8, No 5 (2017) |
Materials of Aircraft and Space Engineering |
Mathematical modeling of temperature fields with consideration for curing kinetics of thick-walled fiberglass plate |
|
Vol 8, No 5 (2017) |
Materials for Electronics |
Synthesis and photocatalytic properties of mesoporous tantalum oxynitride |
|
Vol 8, No 5 (2017) |
Materials of Quantum Electronics and Photonics |
Research of physicochemical properties and structure of strongly doped LiNbO3:ZnO ([ZnO] ~ 4.02–8.91 mol %) crystals |
|
Vol 8, No 5 (2017) |
Materials of Power Engineering and Radiation-Resistant Materials |
Combined matrixes for solidification of organic radioactive liquid wastes containing Cs-137 and Sr-90 |
|
Vol 8, No 5 (2017) |
Materials of Power Engineering and Radiation-Resistant Materials |
Radiation hardening of constructional cement–magnetite–serpentinite composite under gamma irradiation at increased dose |
|
Vol 8, No 5 (2017) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Modification of polyester fabrics with nanosized titanium dioxide to impart photoactivity |
|
Vol 8, No 5 (2017) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
New “old” polylactides for tissue engineering constructions |
|
Vol 8, No 5 (2017) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Low-temperature aging of ceramic on the basis of tetragonal zirconium dioxide stabilized by cations of yttrium and ytterbium |
|
Vol 8, No 5 (2017) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Comparative analysis of methods for increasing the biostability of collagen films |
|
Vol 8, No 5 (2017) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Highly porous bioceramics based on octacalcium phosphate |
|
Vol 8, No 5 (2017) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Effect of supplementation different hydrophobic silicas on the stability of foams |
|
Vol 8, No 5 (2017) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Surface-active properties and physiological activity of systems chitosan succinamide–surface-active substance |
|
Vol 8, No 5 (2017) |
General Purpose Materials |
Physicochemical properties and structure of aerogel type composites on the basis of polyvinyl alcohol/carbon black |
|
Vol 8, No 5 (2017) |
General Purpose Materials |
Application of the filler composite rods based on the B83 babbit alloy for production of the antifriction coatings by arc welding |
|
Vol 8, No 5 (2017) |
General Purpose Materials |
Structure and properties of Mo–9Si–8B alloy fabricated by casting |
|
Vol 8, No 5 (2017) |
General Purpose Materials |
Modification of epoxy matrix by whiskers of potassium polytitanate |
|
Vol 8, No 5 (2017) |
Modern Technologies of Preparation and Processing of Materials |
Hydrogen intercalation of compounds with FeSe and MoS2 layered crystal structures |
|
Vol 8, No 5 (2017) |
Modern Technologies of Preparation and Processing of Materials |
Modification of thermally reduced graphene oxide by the SF6/Ar plasma treatment |
|
Vol 8, No 5 (2017) |
Modern Technologies of Preparation and Processing of Materials |
Mechanothermal synthesis of cobalt, iron, and titanium aluminides |
|
Vol 8, No 5 (2017) |
Modern Technologies of Preparation and Processing of Materials |
High-temperature iron oxidation within the oxidative development approach |
|
Vol 8, No 5 (2017) |
Modern Technologies of Preparation and Processing of Materials |
Combustion synthesis of mica-crystalline materials based on fluorphlogopite using mineral raw materials and aluminum production waste |
|
Vol 8, No 5 (2017) |
Modern Technologies of Preparation and Processing of Materials |
Preparation and properties of porous ceramics based on alumomagnesium spinel and zirconium dioxide |
|
Vol 8, No 5 (2017) |
Modern Technologies of Preparation and Processing of Materials |
Promising use of waste coal in the production of insulating material without the use of traditional natural materials |
|
Vol 8, No 5 (2017) |
Modern Technologies of Preparation and Processing of Materials |
Remote processing of metals with laser radiation with increased intensity |
|
Vol 8, No 5 (2017) |
Modern Technologies of Preparation and Processing of Materials |
Features of technology of preparation of catalytic systems by thermal decomposition for synthesis of carbon nanotubes |
|
Vol 8, No 5 (2017) |
Modern Technologies of Preparation and Processing of Materials |
Synthesis of aluminum oxynitride from MoO3/Al/AlN mixtures by SHS metallurgy |
|
Vol 8, No 5 (2017) |
Methods for Investigation of Material Properties |
Composite model of the dependence of mechanical properties of anodic aluminum oxide on porosity |
|
Vol 8, No 6 (2017) |
Metal Sciences. Metallurgy |
Controlling behavior of δ-ferrite in nitrogen-containing chromium–nickel–manganese steels |
|
Vol 8, No 6 (2017) |
Metal Sciences. Metallurgy |
Structure and properties of new wear-resistant steels for agricultural machine building |
|
Vol 8, No 6 (2017) |
Metal Sciences. Metallurgy |
Development of the high-strength titanium pseudo-β-alloy and semifinished products thereof |
|
Vol 8, No 6 (2017) |
Metal Sciences. Metallurgy |
Optimization of heat treatment hardening modes for semifinished products of Ti-5553 pseudo-β-alloy for marine applications |
|
Vol 8, No 6 (2017) |
Metal Sciences. Metallurgy |
Study of nanostructure of experimental Ti–5Al–4V–2Zr alloy |
|
Vol 8, No 6 (2017) |
Functional Materials |
Structure and properties of the bronze-based functional coating obtained by gas-dynamic and microplasma spraying |
|
Vol 8, No 6 (2017) |
Functional Materials |
Biotechnological studies at the nanocenter of the Central Research Institute of Structural Materials Prometey |
|
Vol 8, No 6 (2017) |
Polymer Composite Materials |
New heat-resistant electrical insulating fiberglass |
|
Vol 8, No 6 (2017) |
Welding and Related Processes. Welding Materials and Technologies |
Effect of welding thermal cycle on structural and phase weld metal transformations for heat-resistant Cr–Mo–V steels |
|
Vol 8, No 6 (2017) |
Welding and Related Processes. Welding Materials and Technologies |
Activated soldering of dissimilar materials with amorphous solders |
|
Vol 8, No 6 (2017) |
Corrosion and Protection of Metals |
New ice-resistant platinum-niobium anodes for cathodic protection systems against erosion-corrosion damage of icebreakers and offshore structures |
|
Vol 8, No 6 (2017) |
Corrosion and Protection of Metals |
The influence of ruthenium on structure, corrosion and mechanical properties, and fatigue characteristics of titanium α-alloys in corrosive environment |
|
Vol 8, No 6 (2017) |
Radiation Materials Science |
Comparative studies of brittle fracture mechanism for standard and reconstructed CT specimens made of VVER-1000 RPV materials |
|
Vol 8, No 6 (2017) |
Radiation Materials Science |
Prediction of radiation embrittlement of WWER-1000 reactor vessel materials considering the influence of alloying elements and high content of copper |
|
Vol 8, No 6 (2017) |
Radiation Materials Science |
Investigation of radiation resistance and structural stability of titanium α-and pseudo-α-alloys |
|
Vol 9, No 1 (2018) |
Article |
Low-Cycle Fatigue under Controlled Deformation and Fracture of the Superalloy VZh175 |
|
Vol 9, No 1 (2018) |
Article |
Preparation and Adhesive Properties of Chromium Oxide Nanolayers |
|
Vol 9, No 1 (2018) |
Article |
Phase Transformations, Strength, and Modulus of Elasticity of Ti–15Mo Alloy Obtained by High-Pressure Torsion |
|
Vol 9, No 1 (2018) |
Article |
Antiwear Properties of Composite Greases “Litol-24–Magnesium Hydrosilicate Particles” |
|
Vol 9, No 1 (2018) |
Article |
Rail Strengthening Nature in the Course of Long-Term Operation |
|
Vol 9, No 1 (2018) |
Article |
On the Problem of Roadmapping of Domestic Arctic Materials Science: Part I |
|
Vol 9, No 1 (2018) |
Article |
On the Problem of Roadmapping of Domestic Arctic Materials Science: Part II |
|
Vol 9, No 1 (2018) |
Article |
Mechanical Properties of Composite Materials Based on Latex-Impregnated Needle-Punched Nonwoven Fabrics from Fibers of Different Nature |
|
Vol 9, No 1 (2018) |
Article |
Metal-Ceramic Composites Based on Iron Oxide for Low-Consumption Anode during Electrolytic Extraction of Aluminum |
|
Vol 9, No 1 (2018) |
Article |
A Vacancy Model of Pore Annihilation During Hot Isostatic Pressing of Single Crystals of Nickel-Base Superalloys |
|
Vol 9, No 1 (2018) |
Article |
Synthesis and Growth of GaSe1 – xSx (x = 0–1) Crystals from Melt. Phase Composition and Properties |
|
Vol 9, No 1 (2018) |
Article |
Gene-Activated Bone Substitute Based on Octacalcium Phosphate and Doped with Magnesium Ions |
|
Vol 9, No 1 (2018) |
Article |
Fatigue Behavior of Titanium Alloys under Very High Cycle Fatigue Loading |
|
Vol 9, No 1 (2018) |
Article |
Electrochemical Detection of Barrier Layer Removal for Preparation of Anodic Alumina Membranes with High Permeance and Mechanical Stability |
|
Vol 9, No 1 (2018) |
Article |
Composite Coatings Based on Low-Temperature Calcium Phosphates for Intraosseous Implants |
|
Vol 9, No 1 (2018) |
Article |
Synthesis, Structure, and Electrochemical Characteristics of Carbon Inverse Opals |
|
Vol 9, No 1 (2018) |
Article |
New Fibrous Materials Based on Poly-3-Hydroxybutyrate for Biomedical Purposes, Made via Electrospinning Technique |
|
Vol 9, No 1 (2018) |
Article |
The Influence of Content of Reinforcing Filler on Mechanical Properties of Carbon-Glass Fiber Reinforced Plastics in Matrix T-107 |
|
Vol 9, No 1 (2018) |
Article |
Physicomechanical Properties of Glacial Composite Materials Reinforced by Rusar-S Fibers |
|
Vol 9, No 1 (2018) |
Article |
Agglomeration and Properties of Ceramics Based on Partially Stabilized Zirconium Dioxide Containing Oxides of Aluminum and Iron |
|
Vol 9, No 1 (2018) |
Article |
Investigation of Photodegradation of High-Density Polyethylene Containing Cyclohexyl Phosphonic Acid and Its Nickel Salts |
|
Vol 9, No 1 (2018) |
Article |
Reinforcement of Brushite Cement Based on α-TCP by Rigid Polylactide Framework |
|
Vol 9, No 1 (2018) |
Article |
Gold Nanoparticles: Synthesis, Optical Properties, and Application |
|
Vol 9, No 1 (2018) |
Article |
Improvement of Structure and Properties of Scintillation Composites by Centrifugation |
|
Vol 9, No 1 (2018) |
Article |
Electrically Conductive Inks Based on Polymer Composition for Inkjet Printing |
|
Vol 9, No 2 (2018) |
Physicochemical Principles of Creating Materials and Technologies |
Theoretical and Experimental Research of Luminescent Properties of Nanoparticles |
|
Vol 9, No 2 (2018) |
Physicochemical Principles of Creating Materials and Technologies |
Formation of Diode-Like Composite Membranes by Plasma Polymerization |
|
Vol 9, No 2 (2018) |
Physicochemical Principles of Creating Materials and Technologies |
Properties and Potential Applications of Quasi-Two-Dimensional Molybdenum Disulfide for Nanoelectronic Elements |
|
Vol 9, No 2 (2018) |
Physicochemical Principles of Creating Materials and Technologies |
Composite Materials Obtained via Two-Nozzle Electrospinning from Polycarbonate and Vinylidene Fluoride/Tetrafluoroethylene Copolymer |
|
Vol 9, No 2 (2018) |
Materials for Aerospace Technology |
Characteristic Features of Physical and Mechanical Properties of Ultrafine-Grained Al–Mg Alloy 1560 |
|
Vol 9, No 2 (2018) |
Materials for Aerospace Technology |
Studies of the Microstructure and Physical and Mechanical Properties of Layered Metal Composite Materials Based on a Molybdenum Matrix |
|
Vol 9, No 2 (2018) |
Materials for Electronics |
Properties of La–Sr Manganites with Combined Substitution of Different Valence Ions for Strontium and Manganese |
|
Vol 9, No 2 (2018) |
Materials for Electronics |
Specific Features of the Growth, Structure, and Main Physicochemical Properties of FeGa2Se4 Single Crystals |
|
Vol 9, No 2 (2018) |
Materials of Power Engineering and Radiation-Resistant Materials |
Fatigue Strength of Ferrite-Martensite 12% Chromium Steels EK-181, EP-823 and Vanadium Alloy V–4Ti–4Cr |
|
Vol 9, No 2 (2018) |
Materials of Power Engineering and Radiation-Resistant Materials |
Synthesis of Stable Bismuth Silicate with Sillenite Structure in the Na2O–Bi2O3–SiO2 System |
|
Vol 9, No 2 (2018) |
Materials of Power Engineering and Radiation-Resistant Materials |
Effect of Deuterium Plasma Irradiation on V–Ga Alloys |
|
Vol 9, No 2 (2018) |
Materials of Power Engineering and Radiation-Resistant Materials |
Study of Nanostructure of Ferritic-Martensitic Steel ChS-139 in Initial State and after Fe Ion Irradiation |
|
Vol 9, No 2 (2018) |
Materials for Human Life Support and Environmental Protection |
M/Gd0.1Ti0.1Zr0.1Ce0.7O2 Catalysts Where M Is Pt, Pd, or Pt–Pd in CO Oxidation |
|
Vol 9, No 2 (2018) |
Materials for Human Life Support and Environmental Protection |
Hyperbranched Functionalized Polyesters for the Creation of Promising Chemically Modified Sorbents |
|
Vol 9, No 2 (2018) |
Materials for Human Life Support and Environmental Protection |
Antimicrobial Properties of Polyester Fabric Modified by Nanosized Titanium Dioxide |
|
Vol 9, No 2 (2018) |
General Purpose Materials |
Influence of Rare Earth Elements on the Structural-Phase State of Mo–Si–X (X = Sc, Y, Nd) in situ Composites |
|
Vol 9, No 2 (2018) |
General Purpose Materials |
Variation of Contents of Carbon, Nitrogen, and Oxygen upon Formation of Plasma Cermet Coatings with Steel Matrix Reinforced with Titanium Carbide |
|
Vol 9, No 2 (2018) |
General Purpose Materials |
Influence of Carbon Nanotubes on Mechanical Properties of Cast Aluminum, Grade A5 |
|
Vol 9, No 2 (2018) |
General Purpose Materials |
Effect of Copper Content on the Structure and Phase Transformations in Melt-Spun TiNi–TiCu Alloys |
|
Vol 9, No 2 (2018) |
General Purpose Materials |
Formation of Structure and Closed Porosity under High-Temperature Firing of Granules of Porous Glass-Ceramic Material |
|
Vol 9, No 2 (2018) |
General Purpose Materials |
Mechanochemical Synthesis of Dy2TiO5 Single-Phase Crystalline Nanopowders and Investigation of Their Properties |
|
Vol 9, No 2 (2018) |
New Technologies of Preparation and Treatment of Materials |
Application of Pulsed Laser Deposition in Reactive Gaseous Media to Fabricate an Effective Hybrid MoSx/WOy Catalyst for the Reaction of Hydrogen Evolution |
|
Vol 9, No 2 (2018) |
New Technologies of Preparation and Treatment of Materials |
Synthesis of Composites from Functionalized Carbon Nanotubes and Polyaniline |
|
Vol 9, No 2 (2018) |
New Technologies of Preparation and Treatment of Materials |
Optimization of Liquid-Phase Method of Synthesis of Cu–W Alloys |
|
Vol 9, No 2 (2018) |
New Technologies of Preparation and Treatment of Materials |
Properties of Composite Electrolytic Coating Nickel–Cobalt–Aluminum Oxide–Fluoroplastic |
|
Vol 9, No 2 (2018) |
New Technologies of Preparation and Treatment of Materials |
Study of Phase Composition of CuO/Cu2O Nanoparticles Produced in the Plasma of a Low-Pressure Arc Discharge |
|
Vol 9, No 2 (2018) |
New Technologies of Preparation and Treatment of Materials |
Combustion Synthesis of Membranes for Steam Reforming of Dimethyl Ether |
|
Vol 9, No 2 (2018) |
New Technologies of Preparation and Treatment of Materials |
Structural Organization of Magnetic Fluids Stabilized with Fatty Acids |
|
Vol 9, No 2 (2018) |
New Technologies of Preparation and Treatment of Materials |
Influence of Mechanical Treatment on Consolidation Processes of Ultradisperse Powders of Stabilized Zirconium Oxide |
|
Vol 9, No 2 (2018) |
New Technologies of Preparation and Treatment of Materials |
Reverse Schemes of Explosive Cladding of Long-Length Pipe Billets |
|
Vol 9, No 2 (2018) |
New Technologies of Preparation and Treatment of Materials |
Creation of Ceramic Composites by High Temperature Oxidation of Iron and Nickel Alloys Using Oxidative Constructing Approach |
|
Vol 9, No 3 (2018) |
Effects of Energy Fluxes on Materials |
Influence of the Test Temperature on the Creep Rate of 0.12C18Cr10NiTi Structural Steel Irradiated in the BN-350 Reactor |
|
Vol 9, No 3 (2018) |
Effects of Energy Fluxes on Materials |
Features of the Damage and the Structural Changes in the Tungsten Surface Layer under the Pulsed Action of Laser Radiation, Ion and Plasma Fluxes |
|
Vol 9, No 3 (2018) |
Effects of Energy Fluxes on Materials |
Effect of Boron Ion Implantation on the Structure, Phase Composition, and Mechanical Properties of Chromium-Fullerite-Chromium Films |
|
Vol 9, No 3 (2018) |
Effects of Energy Fluxes on Materials |
Study of the Structure of Crater at the Surface of 12Cr18Ni10Ti Steel Irradiated by High-Power Pulsed Ion Beam |
|
Vol 9, No 3 (2018) |
Effects of Energy Fluxes on Materials |
The Effect of Ion-Beam Treatment on the Mechanical, Morphological, and Biocompatible Properties of Titanium Medical Products |
|
Vol 9, No 3 (2018) |
Plasmochemical Methods of Production and Treatment of Materials |
Morphology of Polymer Film Coatings Produced in a Barrier Gas Discharge at Atmospheric Pressure |
|
Vol 9, No 3 (2018) |
Plasmochemical Methods of Production and Treatment of Materials |
Calculation of Heat Transfer Characteristics of an Arc in a Gas Stream of Plasma-Arc Furnaces |
|
Vol 9, No 3 (2018) |
Plasmochemical Methods of Production and Treatment of Materials |
Synthesis of Aluminum Oxynitride Nanopowders in a Plasma Reactor with a Confined Jet Flow |
|
Vol 9, No 3 (2018) |
Functional Coatings and Surface Treatment |
Changes in the Elastic-Stress State and Phase Composition of TiAlN Coatings under Thermal Cycling |
|
Vol 9, No 3 (2018) |
Functional Coatings and Surface Treatment |
Structure and Mechanical Properties of TiAlSiY Vacuum-Arc Coatings Deposited in Nitrogen Atmosphere |
|
Vol 9, No 3 (2018) |
Functional Coatings and Surface Treatment |
Thermal Stability of TiZrAlN and TiZrSiN Films Formed by Reactive Magnetron Sputtering |
|
Vol 9, No 3 (2018) |
Functional Coatings and Surface Treatment |
Gradient Structure Generated in Hardox 450 Steel with Built-Up Layer |
|
Vol 9, No 3 (2018) |
Functional Coatings and Surface Treatment |
Plasma Deposition of Ti–C–N Coatings in Air |
|
Vol 9, No 3 (2018) |
Functional Coatings and Surface Treatment |
Structure and Properties of the Surface Layer of B4C Ceramic Treated with an Intense Electron Beam |
|
Vol 9, No 3 (2018) |
Functional Coatings and Surface Treatment |
Structure and Wear Resistance of Plasma Coatings Sputtered Using TiC + HSS Binder Composite Powder |
|
Vol 9, No 3 (2018) |
Functional Coatings and Surface Treatment |
Relationship of the Structure and the Effective Diffusion Properties of Porous Zinc- and Copper-Containing Calcium Phosphate Coatings |
|
Vol 9, No 3 (2018) |
Functional Coatings and Surface Treatment |
The Effect of a Scanning Nanosecond Laser Pulse Beam on the Microtopography of Ceramic Al2O3 Coatings |
|
Vol 9, No 3 (2018) |
Functional Coatings and Surface Treatment |
Nonvacuum Surfacing of Protective Coatings Using a Low-Energy Electron Beam |
|
Vol 9, No 3 (2018) |
Composite Materials |
Nanostructured Composite Materials Based on Al–Mg Alloy Modified with Fullerene C60 |
|
Vol 9, No 3 (2018) |
Composite Materials |
Structure and Properties of the B83 Babbit Alloy Based Composite Materials Produced by Extrusion |
|
Vol 9, No 3 (2018) |
Composite Materials |
Photoluminescence Features and Mechanoluminescence Mechanism Inherent in Composite Materials Based on a Photopolymerizing Resin and Finely Dispersed Powders of SrAl2O4:(Eu2+,Dy3+) and Sr4Al14O25:(Eu2+,Dy3+,B) luminophores |
|
Vol 9, No 3 (2018) |
Composite Materials |
Activated Sintering of Cu-Al2O3 powders |
|
Vol 9, No 3 (2018) |
Composite Materials |
Spark-Plasma Sintering of Al2O3–Graphene Nanocomposite |
|
Vol 9, No 3 (2018) |
Composite Materials |
Features of Uniaxial and Biaxial Deformation of the Contact Boundary of Metals during Explosion Welding |
|
Vol 9, No 3 (2018) |
Composite Materials |
Structure and Magnetic Properties of Nd–Fe–B Magnets Prepared from DyH2-Containing Powder Mixtures |
|
Vol 9, No 3 (2018) |
Composite Materials |
Ignition of Some Powder Mixtures of Metals with Teflon |
|
Vol 9, No 3 (2018) |
New Methods of Treatment and Production of Materials with Required Properties |
Magnetic Hysteresis and Mechanical Properties of Hard Magnetic Fe–27Cr–15Co–2Mo–Si–Ti–V Alloy |
|
Vol 9, No 3 (2018) |
New Methods of Treatment and Production of Materials with Required Properties |
Formation of Axially Aligned Polydisperse Nanocarbon Structures via Chemical Vapor Deposition from Cyclohexane with Ferrocene |
|
Vol 9, No 3 (2018) |
New Methods of Treatment and Production of Materials with Required Properties |
Application of the High-Voltage Nanosecond Discharge for the Control of Proliferation of Fibroblast Cells on the Surface of Fluorine-Carbon Polymer Implants |
|
Vol 9, No 3 (2018) |
New Methods of Treatment and Production of Materials with Required Properties |
Nanotechnologies of the Treatment and Production of Complex Transition Metal Oxides with High Photothermal Effect |
|
Vol 9, No 3 (2018) |
New Methods of Treatment and Production of Materials with Required Properties |
Investigation of the Zirconium Forms in Nickel Melts Containing Exogenous Refractory Oxide Nanophases |
|
Vol 9, No 3 (2018) |
New Methods of Treatment and Production of Materials with Required Properties |
Texture and Anisotropy Parameters of Pressed MA14 Alloy Pipes Produced by Granule Metallurgy Methods |
|
Vol 9, No 4 (2018) |
Article |
Analysis of the Background Temperature During the Mechanical Alloying of Metal Powders in the Planetary Ball Mill |
|
Vol 9, No 4 (2018) |
Article |
Influence of Antiphase Boundaries on Structural and Energy Characteristics of Alloy Cu3Pt5 |
|
Vol 9, No 4 (2018) |
Article |
On the Interaction of the Deformation and Photonic Self-Organizations in Condensed Media: Overview |
|
Vol 9, No 4 (2018) |
Article |
Blended Portland Cement Based on Thermally Activated Clays and Carbonate Additives |
|
Vol 9, No 4 (2018) |
Article |
Thermal and Electrical Conductivity of Copper-Fluoroplast Composites Produced by Explosive Pressing |
|
Vol 9, No 4 (2018) |
Article |
Formation of Glaze Coatings of Clinker Bricks Based on Raw Kaolin and Aluminum-Containing Nanotechnogenic Raw Materials |
|
Vol 9, No 4 (2018) |
Article |
High-Temperature Filter Based on Silicon Carbide for Aggressive Fluids and Gases |
|
Vol 9, No 4 (2018) |
Article |
Effect of Reaction Sintering Conditions on Properties of Ceramics Based on Alumina Oxynitride |
|
Vol 9, No 4 (2018) |
Article |
Thixotropy Hysteresis and Structure Formation in Elastomeric Suspensions |
|
Vol 9, No 4 (2018) |
Article |
Grain Structure of Rapidly Solidified Alloy Sn32Bi52Pb16 |
|
Vol 9, No 4 (2018) |
Article |
Effect of Microstructural Features of Titanium Alloys on Fatigue Properties and Mechanism of Crack Nucleation in Region of Very High Cycle Fatigue |
|
Vol 9, No 4 (2018) |
Article |
Structure and Strength of the ZhS32-VI Heat-Resistant Nickel Alloy Produced by the Method of Selective Laser Alloying on a Single-Crystal Substrate |
|
Vol 9, No 4 (2018) |
Article |
Formation of Coatings Based on Copper Aluminides on Aluminum Surface by Contact Melting |
|
Vol 9, No 4 (2018) |
Article |
Development of an Efficient Method for Polyphenylene Sulfide Production |
|
Vol 9, No 4 (2018) |
Article |
Tribotechnical Properties of Composite Material “Aluminum–Carbon Nanofibers” under Friction on Steels 12Kh1 and ShKh15 |
|
Vol 9, No 4 (2018) |
Article |
The Microctructure Formation and the Composite Properties Based on Alginate with Antibacterial Activity |
|
Vol 9, No 4 (2018) |
Article |
Model of the Destruction of Bioresorbable Polymers in Aqueous Media |
|
Vol 9, No 4 (2018) |
Article |
High-Cycle Fatigue of Single Crystals of Nickel-Base Superalloy VZhM4 |
|
Vol 9, No 4 (2018) |
Article |
Formation of Plastic Zones near Spherical Cavity in Hardened Low-Carbon Steels under Conditions of Hydrogen Stress Corrosion |
|
Vol 9, No 4 (2018) |
Article |
Relaxation Properties of Thermoplastic Styrene-Butadiene Block Copolymer with Nanodiamond Filler |
|
Vol 9, No 4 (2018) |
Article |
Molding Features of Silicon Carbide Products by the Method of Hot Slip Casting |
|
Vol 9, No 4 (2018) |
Article |
Effect of the Addition of Thermally Activated Heavy Loam to Portland Cement on the Properties of Cement Stone |
|
Vol 9, No 4 (2018) |
Article |
Calculation of X-ray Density of Amorphous–Crystalline Polymer Taking into Account Degree of Ordering of Amorphous Phase |
|
Vol 9, No 4 (2018) |
Article |
Occurrence and Ways of Development of Manufacture of Domestic Hard Alloy Products |
|
Vol 9, No 4 (2018) |
Article |
X-ray Diffraction Tests of Near-Surface Layer of Copper Treated by Ball Rolling |
|
Vol 9, No 4 (2018) |
Article |
The Formation of Carbide Coatings at the Microarc Thermodiffusion Tungstenizing of Steel |
|
Vol 9, No 4 (2018) |
Article |
Study of Formation of Welded Joint Produced by Laser Overlap Welding of Aluminum AMg2M Alloy and St3 Steel |
|
Vol 9, No 4 (2018) |
Article |
Antifriction Properties of Plasma-Chemical Coatings Based on SiO2 with MoS2 Nanoparticles under Conditions of Spinning Friction on ShKh15 Steel |
|
Vol 9, No 4 (2018) |
Article |
Polymers and Composites Produced from Epoxy Resins Cured with 3,5-Diethyltoluenediamine: Synthesis and Properties |
|
Vol 9, No 4 (2018) |
Article |
Powder Mixtures Based on Calcium Hydroxyapatite and Sodium Salts |
|
Vol 9, No 4 (2018) |
Article |
Effect of Heat Shotblast Treatment Exerted on the Contact Fatigue of Carburised Heat-Resistant Steel C0.12Cr2NiWV |
|
Vol 9, No 4 (2018) |
Article |
Influence of Physicochemical Characteristics of Tempering Medium and Friction Modes on the Structure and Kinetics of Strengthening and Destruction of Surface Layer of Nickel |
|
Vol 9, No 4 (2018) |
Article |
Strength and Destruction Mechanism of Low-Alloy Steel Subjected to a Combined Deformation Treatment |
|
Vol 9, No 4 (2018) |
Article |
The Ion-Exchange Properties of Polymeric Zirconium Phosphate and Zirconium Dioxide |
|
Vol 9, No 4 (2018) |
Article |
Influence of the Surface Modification on the Mechanical Properties of NiTi (55.8 wt % Ni) Alloy Wire for Medical Purposes |
|
Vol 9, No 4 (2018) |
Article |
Distribution of Substitutional Alloying Elements and Interstitial Impurities in In Situ Multicomponent Composites Based on the Nb–Si System |
|
Vol 9, No 4 (2018) |
Article |
The Temperature Effect on Mechanical Properties of Carbon Fiber Reinforced Plastics for Aviation Purposes |
|
Vol 9, No 4 (2018) |
Article |
Dispersion Interactions as Criterion of Optimization of Cementless Composite Binders |
|
Vol 9, No 4 (2018) |
Article |
Effect of Chemical Composition of Shungite Material on Its Sorption Properties |
|
Vol 9, No 5 (2018) |
Physicochemical Principles of Creating Materials and Technologies |
Composite Bilayer Polymer Membranes with Hydrophobic Layers |
|
Vol 9, No 5 (2018) |
Physicochemical Principles of Creating Materials and Technologies |
Prospects of Application of Self-Healing Materials and Technologies Based on Them |
|
Vol 9, No 5 (2018) |
Electronic Engineering Materials |
Manufacturing Transparent Conducting Films Based on Directly Exfoliated Graphene Particles via Langmuir–Blodgett Technique |
|
Vol 9, No 5 (2018) |
Electronic Engineering Materials |
Synthesis and Electrochemical Properties of Lithium Titanate |
|
Vol 9, No 5 (2018) |
Electronic Engineering Materials |
Systems of Manganites with Enhanced Electromagnetic Parameters |
|
Vol 9, No 5 (2018) |
Electronic Engineering Materials |
Study of Linear Light Edge-Emitting Diodes Based on InP/InGaAsP/InP Heterostructure with the Crescent Active Region |
|
Vol 9, No 5 (2018) |
Quantum Electronic and Photonic Materials |
Physicochemical and Optical Characteristics of LiNbO3 Single-Crystals Doped with Boron |
|
Vol 9, No 5 (2018) |
Materials of Power Engineering and Radiation-Resistant Materials |
Structural Features of Mineral Crystalline Phases and Defectiveness of Bismuth Organosiliconate Crystals at High Temperatures |
|
Vol 9, No 5 (2018) |
Materials of Power Engineering and Radiation-Resistant Materials |
Surface Structure Transformation in Double Forged Tungsten upon Single and Sequenced Irradiation Using Different Types of Radiation Facilities |
|
Vol 9, No 5 (2018) |
Materials of Power Engineering and Radiation-Resistant Materials |
Combined Action of Fast Neutrons and Operational Factors on Reliability of Infrared LEDs |
|
Vol 9, No 5 (2018) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Shear Strength of the Cylindrical Titanium Implant–Plastic System |
|
Vol 9, No 5 (2018) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Tetrafluoroethylene Telomeres Used to Prepare Fluorine-Containing Hydrophobic Silica Fabric |
|
Vol 9, No 5 (2018) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Promising NiO–30 wt % Ag–40 wt % Bi2O3 Membrane Material for Separation of Oxygen from Air |
|
Vol 9, No 5 (2018) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Biomedical Materials Based on Polymer-Colloid Dispersion of Succinamide Chitosan-Sol of Silver Iodide |
|
Vol 9, No 5 (2018) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Porous Carbonated Hydroxyapatite Ceramics Obtained by the Original Method of “Ceramic Biscuit” for Medicine |
|
Vol 9, No 5 (2018) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Comparative Analysis of the Properties of Hydroxyapatite Powders Prepared by Different Techniques |
|
Vol 9, No 5 (2018) |
General-Purpose Materials |
Influence of Graphitization Conditions at 3000°C on Structural and Mechanical Properties of High-Modulus Polyacrylonitrile-Based Carbon Fibers |
|
Vol 9, No 5 (2018) |
General-Purpose Materials |
Magnetic Properties of the Sm(Co0.45Fe0.15Cu0.40)5 Alloy Prepared by Strip Casting |
|
Vol 9, No 5 (2018) |
General-Purpose Materials |
Porous Refractory Ceramics as a Protective Material in Explosive Loading of Metal Container |
|
Vol 9, No 5 (2018) |
General-Purpose Materials |
Effect of Mechanical Treatment on the Structure and Properties of Natural Zeolite |
|
Vol 9, No 5 (2018) |
General-Purpose Materials |
Impact of the Structure on Mechanical and Tribological Properties of Sintered (Al–12 Si)–40 Sn Alloy |
|
Vol 9, No 5 (2018) |
New Technologies for Design and Processing of Materials |
Tuning the Properties of Refractory Carbide Nanopowders |
|
Vol 9, No 5 (2018) |
New Technologies for Design and Processing of Materials |
Effect of Drying Methods of Alumina Powder and Graphene Oxide Mixture on the Mechanical and Electrical Properties of Sintered Composites Fabricated by Spark Plasma Sintering |
|
Vol 9, No 5 (2018) |
New Technologies for Design and Processing of Materials |
Conditions for the Production of Active Aluminum Oxide Meeting the Requirements of Prospective Chloride Technology |
|
Vol 9, No 5 (2018) |
New Technologies for Design and Processing of Materials |
Properties of Electrolytic Silver-Based Alloy |
|
Vol 9, No 5 (2018) |
New Technologies for Design and Processing of Materials |
Synthesis and Characterization of Supercapacitor Electrode Materials Based on Carbon Fiber Materials and Metal Oxyhydroxides |
|
Vol 9, No 5 (2018) |
New Technologies for Design and Processing of Materials |
Frame Catalysts of Al2O3–ZrO2–CeO2 System |
|
Vol 9, No 5 (2018) |
New Technologies for Design and Processing of Materials |
Thermal Stability of Structure and Properties of the Surface Layer of Instrumental Steel Alloyed with Zirconium and Silicon Atoms under the Action of Compression Plasma Flows |
|
Vol 9, No 5 (2018) |
New Technologies for Design and Processing of Materials |
Dielectric Properties of Multilayer Optically Transparent TiO2-Nanosilver Coating on Polyester Substrate Obtained by Solvent Method |
|
Vol 9, No 5 (2018) |
New Technologies for Design and Processing of Materials |
Mesoporous Powders for Catalyst Supports Produced from Al2O3–ZrO2 (Y2O3) System |
|
Vol 9, No 5 (2018) |
New Technologies for Design and Processing of Materials |
Chemical Vapor Deposition of Wear-Resistant Iron-Nickel Coating onto Precision Parts of Hydraulic Systems |
|
Vol 9, No 5 (2018) |
Investigation Methods Of Matherial Properties |
Combined Research of Dispersed Precipitates in High-Strength Steel |
|
Vol 9, No 6 (2018) |
Metal Sciences. Metallurgy |
Structure Changes of High-Strength Economically Alloyed Steel 09KhGN2MD (09CrMnNi2MoCu) In Tempering |
|
Vol 9, No 6 (2018) |
Metal Sciences. Metallurgy |
Carburization of Heat-Exchanger Pipes of 09Kh18N9 Grade Steel in Contact with Sodium Coolant |
|
Vol 9, No 6 (2018) |
Metal Sciences. Metallurgy |
Refractory Monocarbides and Diborides of Transition Metals: Promising Components of High-Temperature Composite Materials |
|
Vol 9, No 6 (2018) |
Metal Sciences. Metallurgy |
Concentration Redistribution of Alloying Elements in Pseudo-Alpha-Titanium Alloy under Elastoplastic Deformation |
|
Vol 9, No 6 (2018) |
Metal Sciences. Metallurgy |
Research on Submicron-Grained Structure Formation in Titanium Alloys upon Reversible Hydrogenation and Plastic Deformation |
|
Vol 9, No 6 (2018) |
Metal Sciences. Metallurgy |
Structural Features of Niobium Carbide Disperse Particles in the Structure of Heat-Resistant Alloys Based on Fe–25Cr–35Ni System |
|
Vol 9, No 6 (2018) |
Metal Sciences. Metallurgy |
Development of Ni-Base Superalloy with Operating Temperature up to 800°C for Gas Turbine Disks |
|
Vol 9, No 6 (2018) |
Metal Sciences. Metallurgy |
Influence of Hot Plastic Deformation Modes on the Structure and Properties of Quenched Hot Rolled Economically Alloyed High-Strength Steel |
|
Vol 9, No 6 (2018) |
Metal Sciences. Metallurgy |
Structure Formation of the Nitrogen-Containing Austenitic 04Kh20N6G11M2AFB Steel at Hot Deformation: Part I. Influence of Deformation Temperature and Strain Rate on the Process of Dynamic Recrystallization |
|
Vol 9, No 6 (2018) |
Metal Sciences. Metallurgy |
Structure Formation of the Nitrogen-Containing Austenitic 04Kh20N6G11M2AFB Steel at Hot Deformation: Part II. Influence of the Phase Composition and Conditions of Hot Deformation on the Process of Dynamic Recrystallization |
|
Vol 9, No 6 (2018) |
Metal Sciences. Metallurgy |
Structure and Properties of the Heat-Affected Zone of Low-Alloy Cold-Resistant Steel for Arctic Application |
|
Vol 9, No 6 (2018) |
Functional Materials |
Features of Thermal Effects of Coatings Fabricated by Cold Gas Dynamic Spraying under Thermal Load |
|
Vol 9, No 6 (2018) |
Functional Materials |
Wear- and Corrosion-Resistant Functionally Gradient Coatings Based on Composite Powders of Metal–Nonmetal System |
|
Vol 9, No 6 (2018) |
Functional Materials |
Cast Microwire with High Value of Thermoelectromotive Force |
|
Vol 9, No 6 (2018) |
Polymer Composite Materials |
Heat-Resistant Electrical Insulating Fiberglass Plastics for Shipbuilding |
|
Vol 9, No 6 (2018) |
Polymer Composite Materials |
Epoxy Vinyl Ester Binder for Fire-Resistant Marine Fiberglass Plastics |
|
Vol 9, No 6 (2018) |
Polymer Composite Materials |
Researching the Interface of Polymer Matrices with Optical Fibers in Smart Materials |
|
Vol 9, No 6 (2018) |
Polymer Composite Materials |
Temperature and Frequency Dependences of Dissipative Properties of Rigid Vibration-Damping Coatings |
|
Vol 9, No 6 (2018) |
Welding and Allied Processes. Welding Consumables and Technologies |
Improvement of the Service Properties of the Weld Joint Metal for Transport Nuclear Power Units Manufactured of Heat-Resistant Steel Grades: Part I. Technology of Welding Heat-Resistant Steel Grades Using Low-Carbon Welding Materials without Heat Treatment and Experience of Applying Welding Materials |
|
Vol 9, No 6 (2018) |
Welding and Allied Processes. Welding Consumables and Technologies |
Improvement of the Service Properties of the Weld Joint Metal for Transport Nuclear Power Units Manufactured of Heat-Resistant Steel Grades: Part II. A Study of Mechanical Properties of Low-Carbon Weld Deposits Depending on the Welding Process Variables |
|
Vol 9, No 6 (2018) |
Welding and Allied Processes. Welding Consumables and Technologies |
Improvement of the Service Properties of the Weld Joint Metal for Transport Nuclear Power Units Manufactured of Heat-Resistant Steel Grades: Part III. A Study of the Influence of Alloying Elements on the Characteristics of the All-Weld Metal as Applied to the Fabrication of Low-Carbon Metal Deposits and Assembly Weld Joints in Icebreaker Nuclear Power Units |
|
Vol 9, No 6 (2018) |
Welding and Allied Processes. Welding Consumables and Technologies |
Effect of Boron Microalloying on the Structure and Properties of a Welded Joint Made of a Flux-Cored Wire for Welding of Flat-Rolled High-Strength Steel Plates with a Standard Yield Stress of 750 MPa |
|
Vol 9, No 6 (2018) |
Welding and Allied Processes. Welding Consumables and Technologies |
Calculation of Thermal Processes around Moving Molten Pool Using Boundary Element Method |
|
Vol 9, No 6 (2018) |
Corrosion and Protection of Metals |
Effect of Interstitial Elements on Pitting and Intercrystalline Corrosion of Austenitic Chromium-Nickel Steel |
|
Vol 9, No 6 (2018) |
Corrosion and Protection of Metals |
Some Aspects of Studying the Corrosion Processes in 25Kh1MF Steel Fasteners after Aluminizing |
|
Vol 9, No 6 (2018) |
Radiation Materials Science |
Synergistic Mechanism of Radiation Embrittlement of Austenitic Stainless Steels under Long-Term High-Temperature Irradiation |
|
Vol 9, No 6 (2018) |
Radiation Materials Science |
Influence of Neutron Irradiation and Post-Irradiation Annealing on Mechanical Properties and Fracture Toughness of the Anticorrosive Cladding for VVER-Type Reactors: Part 1. Mechanisms of Embrittlement and Recovery of Cladding Properties |
|
Vol 9, No 6 (2018) |
Radiation Materials Science |
Influence of Neutron Irradiation and Post-Irradiation Annealing on Mechanical Properties and Fracture Toughness of Anticorrosive Cladding for VVER-Type Reactors: Part 2. Predictive Modeling of the Mechanical Properties and Fracture Toughness of Cladding |
|
Vol 9, No 6 (2018) |
Radiation Materials Science |
Study of Steel Corrosion Cracking Mechanisms for VVER RPV Internals Based on Simulation Tests |
|
Vol 9, No 6 (2018) |
Radiation Materials Science |
Improvement of the Approach to Predict the Fracture Toughness of Irradiated Anticorrosive Cladding for WWER-Type Reactors |
|
Vol 9, No 6 (2018) |
Simulation of Materials and Technological Processes |
Mathematical Modeling of Stress–Strain State in Titanium Alloys Considering the Microstructure and Crystal Orientation Measured by EBSD |
|
Vol 9, No 6 (2018) |
Structural and Technological Strength and Efficiency of Materials |
Construction of Theoretical Curves of the Long-Term Strength for Neutron-Irradiated Austenitic Steels Kh18N9 and 08Kh16N11M3 |
|
Vol 10, No 1 (2019) |
Article |
Carboborating of the Intermetallic Ti3Al-Based Alloys |
|
Vol 10, No 1 (2019) |
Article |
The Impact of Severe Plastic Deformation on the Microstructure and Physicomechanical Properties of Al–0.4Zr |
|
Vol 10, No 1 (2019) |
Article |
Modeling the Structure of a Reinforcing Phase at Heat Treatment of Steel Products |
|
Vol 10, No 1 (2019) |
Article |
Selection of Technological Parameters of Selective Laser Melting of Mechanocomposite Ti–Nb Powder |
|
Vol 10, No 1 (2019) |
Article |
Mechanism of the Hydrogen Cracking of Metals and Alloys, Part I (Review) |
|
Vol 10, No 1 (2019) |
Article |
Mechanism of the Hydrogen Cracking of Metals and Alloys, Part II (Review) |
|
Vol 10, No 1 (2019) |
Article |
Perspective Preparation Approaches of Nanocrystalline Ceria: Review |
|
Vol 10, No 1 (2019) |
Article |
Structure and Properties of the Boron Carbide Powder Obtained by the Mechanochemical Synthesis of the Carbon Char and Amorphous Boron Mix |
|
Vol 10, No 1 (2019) |
Article |
Effect of Thermal Aging on Deformation Properties of Nitrile-Butadiene Rubber: Atomic Force Microscopy Data |
|
Vol 10, No 1 (2019) |
Article |
Influence of Aluminum and Hydrogen on the Properties of Sm2Fe17 |
|
Vol 10, No 1 (2019) |
Article |
Study of Effect of Damage Accumulation on Stress Distribution Parameters in Mesovolume of Biocomposite and Its Performance Characteristics |
|
Vol 10, No 1 (2019) |
Article |
Polymer Composites Based on Aramid Fibers with Increased Shear Strength for Aircraft Engineering Products |
|
Vol 10, No 1 (2019) |
Article |
Spark Plasma Sintering of the Stock Material Made of the Boron Carbide Obtained by Different Methods |
|
Vol 10, No 1 (2019) |
Article |
Computer-Aided Design of Process of Fabrication on Steel of Solid Lubricating Coating Based on Bank Sand |
|
Vol 10, No 1 (2019) |
Article |
Substructures in Destructed Samples of Polycrystalline Cu–Mn Solid Solutions |
|
Vol 10, No 1 (2019) |
Article |
The Impact of Strain Aging on the Mechanical Properties of Steel 37KhGF |
|
Vol 10, No 1 (2019) |
Article |
The Influence of Thermal Cycling on the Aging Processes and Physical and Mechanical Properties of a TiNi Alloy |
|
Vol 10, No 1 (2019) |
Article |
Consolidation of Nanocrystals of Detonation Nanodiamond under Thermobaric Sintering |
|
Vol 10, No 1 (2019) |
Article |
Mechanical Characteristics of Composites Based on β-Ca3(PO4)2/Poly(D,L-Lactide) and β-Ca3(PO4)2/Poly(ε-Caprolactone) |
|
Vol 10, No 1 (2019) |
Article |
Laser Dispersion of Titanium and Magnesium Oxides in Zr–1% Nb Alloy Affecting Surface Structure and Protective Properties |
|
Vol 10, No 1 (2019) |
Article |
Properties of Compositions Based on Cement and Modified Nanodispersed Titanium Dioxide |
|
Vol 10, No 1 (2019) |
Article |
Evaluating the Microhardness of Samples Based on Binder VST-1210 Cured under Various Conditions as a Method of Testing |
|
Vol 10, No 1 (2019) |
Article |
Reducing the Rate of Plasticizer Leaching from Poly(vinyl chloride) Matrix |
|
Vol 10, No 1 (2019) |
Article |
Additive Technologies for Design of Structural Materials on the Basis of the Nanocenter of the National Research Center Kurchatov Institute—CRISM Prometey |
|
Vol 10, No 1 (2019) |
Article |
Study of the Influence of Different Types of Treatment of the 12H18N10T Medical Steel Surface on Antibacterial Effect |
|
Vol 10, No 1 (2019) |
Article |
Wear-Resistant Coatings on WC–Co Hard Alloys Synthesized by Concentrated Energy Flows |
|
Vol 10, No 1 (2019) |
Article |
Change in Interlayer Strength and Fracture Toughness of Carbon-Carbon Composite Material under the Impact of Cyclic Loads |
|
Vol 10, No 1 (2019) |
Article |
Effect of Synthesis Conditions on the Structure and Phase Composition of Magnesium Diboride |
|
Vol 10, No 1 (2019) |
Article |
Interconnection of Structural Characteristics with Dynamic Properties of A5083 Aluminum Alloy |
|
Vol 10, No 1 (2019) |
Article |
Relaxation Spectroscopy of Polyethylenes of Different Molecular Weight |
|
Vol 10, No 1 (2019) |
Article |
Nanocomposite Synthesized in Plasma of Pulse High-Voltage Discharge Initiated between Copper Electrodes in the Presence of Fluoroplast |
|
Vol 10, No 1 (2019) |
Article |
Method of Estimation of Mechanical Properties of the Surface Layer of Cutter Elements Made of Polycrystalline Superhard Composites Based on Cubic Boron Nitride |
|
Vol 10, No 1 (2019) |
Article |
Cytocompatibility and Matrix Properties of Surfaces of Nanostructured Calcium Phosphate Cements |
|
Vol 10, No 1 (2019) |
Article |
Estimation of Mechanical Properties of Wrapping Polyethylene Films |
|
Vol 10, No 1 (2019) |
Article |
Structural Features of Cu–Ag Alloys Obtained via Mechanical Alloying with the Use of Cold and Cryogenic Severe Plastic Deformation |
|
Vol 10, No 1 (2019) |
Article |
The Influence of Sulfur, Phosphorus, and Silicon Impurities on Structure and Properties of Single Crystals of Nickel Heat-Resistant Alloys |
|
Vol 10, No 1 (2019) |
Article |
Transfer of Mechanical Stress from Polymer Matrix to Nanofiller in Dispersion-Filled Nanocomposites |
|
Vol 10, No 1 (2019) |
Article |
Functional Properties of Nickel–Titanium/Silicone Rubber Composite |
|
Vol 10, No 1 (2019) |
Article |
Activation of Structure Formation Processes in Cement Systems by Magnetic Field |
|
Vol 10, No 1 (2019) |
Article |
On the Choice of the Architecture of Osteoconductive Bioceramic Implants |
|
Vol 10, No 2 (2019) |
Physicochemical Principles of Creating Materials and Technologies |
Modern Methods for Synthesis of Few-Layer Graphene Structures by Electrochemical Exfoliation of Graphite |
|
Vol 10, No 2 (2019) |
Physicochemical Principles of Creating Materials and Technologies |
Calculation of Third-Order Elastic Constants of the Crystals of a TiNi-Based Alloy with Shape Memory |
|
Vol 10, No 2 (2019) |
Physicochemical Principles of Creating Materials and Technologies |
Evolution of the Al85Ni5Fe7La3 Amorphous Alloy Structure under Flash Lamp Annealing |
|
Vol 10, No 2 (2019) |
Physicochemical Principles of Creating Materials and Technologies |
Synthesis and Study of New Luminescent Carbon Particles with High Emission Quantum Yield |
|
Vol 10, No 2 (2019) |
Physicochemical Principles of Creating Materials and Technologies |
Thermophysical Properties of Powder-Polymer Mixture for Fabrication of Parts of 42CrMo4 Steel by the MIM Method |
|
Vol 10, No 2 (2019) |
Physicochemical Principles of Creating Materials and Technologies |
Calculation of Filament Volume Fraction in Dry Roving and Constants of Parameters of Composites Made of Unidirectional Fibers |
|
Vol 10, No 2 (2019) |
Physicochemical Principles of Creating Materials and Technologies |
Receiving the Recipe of the Compositions Based on UHMWPE with the Assigned Properties |
|
Vol 10, No 2 (2019) |
Physicochemical Principles of Creating Materials and Technologies |
Magnetic Nanodispersed Lubricants Based on Organosilicon Liquids |
|
Vol 10, No 2 (2019) |
Materials for Aerospace Technology |
Effect of Chemical Composition Variability on Phase Composition and Structure of Beta-Solidifying TiAl-Alloy in As-Cast Condition |
|
Vol 10, No 2 (2019) |
Materials for Electronics |
Epitaxial Growth of Iron and Indium Oxide Thin Films on Sapphire R-Plane with a Regular Relief |
|
Vol 10, No 2 (2019) |
Materials of Power Engineering and Radiation-Resistant Materials |
Behavior of Capillary-Porous Systems with Liquid Lithium under Influence of Pulsed Deuterium Plasma |
|
Vol 10, No 2 (2019) |
Materials of Power Engineering and Radiation-Resistant Materials |
Study of Microscopic Origins of Radiation Hardening of Eurofer 97 in Simulation Experiment with Ion Irradiation |
|
Vol 10, No 2 (2019) |
Materials of Power Engineering and Radiation-Resistant Materials |
Damageability of the Al2O3 Oxide Coating on the Aluminum Substrate by Pulsed Beam Plasma and Laser Radiation |
|
Vol 10, No 2 (2019) |
Materials for Human Life Support and Environmental Protection |
Improvement of Functional Properties of Medical Stainless Steel Surface by Treatment with Helium, Argon, and Silver Ions |
|
Vol 10, No 2 (2019) |
Materials for Human Life Support and Environmental Protection |
Investigation of Brushite Cement Based on α-Tricalcium Phosphate and Its Composite with Polylactic Framework |
|
Vol 10, No 2 (2019) |
Materials for Human Life Support and Environmental Protection |
Structure and Properties of Gas-Filled Biocomposites on the Basis of Polyethylene |
|
Vol 10, No 2 (2019) |
Materials for Human Life Support and Environmental Protection |
Composite Porous Tubular Biopolymer Matrix of Small Diameter |
|
Vol 10, No 2 (2019) |
Materials for Human Life Support and Environmental Protection |
Effects of Synthesis Method and Stabilizing Agent Trehalose on Functional Properties of Protein Composites with Colloidal Silica |
|
Vol 10, No 2 (2019) |
General Purpose Materials |
Thermoelastoplastics Based on a Mixture of Thermoplastic Polyolefins and Butyl Rubber |
|
Vol 10, No 2 (2019) |
General Purpose Materials |
The Magnetic Properties of a Magnetically Soft Composite Material for Use in the Low-Frequency Range |
|
Vol 10, No 2 (2019) |
General Purpose Materials |
Curing of ED-20 Epoxy Resin with Diesterdisulfoanhydride of 2-Hydroxypropyl Saccharin-6-Carboxylic Acid |
|
Vol 10, No 2 (2019) |
General Purpose Materials |
Effect of Zinc Molybdate on the Fire-Resistant and Physicomechanical Properties of PVC Plastic |
|
Vol 10, No 2 (2019) |
General Purpose Materials |
Cermet Plasma TiC–Cr3C2–NiCr–Mo–C Coatings |
|
Vol 10, No 2 (2019) |
General Purpose Materials |
Metal-Containing Nanocomposites on the Basis of Isotactic Polypropylene |
|
Vol 10, No 2 (2019) |
General Purpose Materials |
Effect of Sintering Parameters on the Phase Composition of Ceramic Based on Aluminum Oxynitride |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
Combined Influence of Severe Plastic Deformation and Cold Rolling on Mechanical Properties of Al–Mg2Si Alloys |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
Effect of Temperature on Annealing Products of Synthesized Opal Matrices |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
Synthesis of the Materials with a Switchable Wettability Based on Photosensitive Terpolymers Containing Poly(Titanium Oxide) |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
Surface Modification of Corundum Ceramics by Argon Ion Beam |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
Plasma-Chemical Modification of Facing Composite Material on the Basis of Hollow Glass Microspheres with Decorative Protective Coating |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
Creation of Highly Porous Material with a Hierarchical Structure by Sintering of Nickel Nanopowder Using Ammonium Bicarbonate as Space Holder |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
Gradient Absorber of Electromagnetic Waves |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
Conditions for Obtaining “Thick” Amorphous Wires by the Ulitovsky–Taylor Method |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
Application of Low-Temperature Postradiation Polymerization of Polytetrafluoroethylene for Hydrophobization of Porous Ceramic Materials Based on Oxide Fibers |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
SHS Metallurgy of Binary Silicides (MoW)Si2 for Sintering Composite Materials |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
Formation the Properties of Carbon Black Particles by Gas-Phase Thermochemical Modification |
|
Vol 10, No 2 (2019) |
New Technologies of Preparation and Treatment of Materials |
Copper Smelter Dust Is a Promising Material for the Recovery of Nonferrous Metals by the Waelz Process |
|
Vol 10, No 3 (2019) |
Effects of Energy Fluxes on Materials |
Influence of Pulsed Beams of Deuterium Ions and Deuterium Plasma on the Aluminum Alloy of Al–Mg–Li System |
|
Vol 10, No 3 (2019) |
Effects of Energy Fluxes on Materials |
Synthesis, Structure, and Properties of Superconductors under the Action of Plasma Shock Waves |
|
Vol 10, No 3 (2019) |
Effects of Energy Fluxes on Materials |
The Competition of Intermediate Phases in the Diffusion Zone |
|
Vol 10, No 3 (2019) |
Effects of Energy Fluxes on Materials |
Effect of Irradiation on Interdiffusion in Fe–Cr System |
|
Vol 10, No 3 (2019) |
Effects of Energy Fluxes on Materials |
Formation of Residual Stresses in the Surface Layers of Titanium Alloy Targets Irradiated with High-Current Pulsed Electron Beams |
|
Vol 10, No 3 (2019) |
Effects of Energy Fluxes on Materials |
Ultrasonic Absorption at Low Temperatures Subject to the Fermi Liquid Correlation of Electrons |
|
Vol 10, No 3 (2019) |
Effects of Energy Fluxes on Materials |
Determination of Temperature Dynamics of Materials under Laser Heating by the Method of Spectral Pyrometry |
|
Vol 10, No 3 (2019) |
Effects of Energy Fluxes on Materials |
Condition of Surface of Titanium after Pulsed X-ray Exposure |
|
Vol 10, No 3 (2019) |
Plasmochemical Methods of Production and Treatment of Materials |
Local Ion Nitriding of Martensitic Structural Steel in Plasma of Glow Discharge with Hollow Cathode |
|
Vol 10, No 3 (2019) |
Plasmochemical Methods of Production and Treatment of Materials |
Cermet Plasma Coatings with Titanium Carbide |
|
Vol 10, No 3 (2019) |
Plasmochemical Methods of Production and Treatment of Materials |
Internal Stresses in Plasma Deposited Polymer Film Coatings |
|
Vol 10, No 3 (2019) |
Plasmochemical Methods of Production and Treatment of Materials |
The Energetic Structure of Plasma Arc Anode under Reduction Melting of Quartz-Leucoxene Concentrate |
|
Vol 10, No 3 (2019) |
Plasmochemical Methods of Production and Treatment of Materials |
Effect of the Conditions of Formation of W–C Nanopowders in a Plasma Jet on the Synthesis of Hexagonal Tungsten Carbide |
|
Vol 10, No 3 (2019) |
Plasmochemical Methods of Production and Treatment of Materials |
Conditions for Plasma Jet Formation in a Laminar Plasmatron |
|
Vol 10, No 3 (2019) |
Functional Coatings and Surface Treatment |
Change in the Morphology of the Surface of Ta–W Coating after Exposure to Cyclic Laser Pulses |
|
Vol 10, No 3 (2019) |
Functional Coatings and Surface Treatment |
Formation of the Structure via Electron Beam Cladding of Coatings by Titanium Carbide–Titanium Binder Powders |
|
Vol 10, No 3 (2019) |
Functional Coatings and Surface Treatment |
Structure and Properties of Composite Nickel Coatings Deposited by Means of Programmable Pulsed Current under Laser Irradiation |
|
Vol 10, No 3 (2019) |
Functional Coatings and Surface Treatment |
Structure, Phase Composition, and Hardness of Coatings Obtained by High-Energy Electron Beam Cladding of a Mixture of Cr3C2 and TiC Powders on Low-Carbon Steel |
|
Vol 10, No 3 (2019) |
Functional Coatings and Surface Treatment |
Formation of MAO-Coatings on the Substrate of Carbon Structural Steels in Solutions with Finely Dispersed Corundum |
|
Vol 10, No 3 (2019) |
Functional Coatings and Surface Treatment |
Structure and Properties of Electro-Explosive TiC–Ni–Mo Coatings of Die Steel after Electron-Beam Treatment |
|
Vol 10, No 3 (2019) |
Functional Coatings and Surface Treatment |
Numerical Simulation of Metal Surface Layer Modification Using High-Frequency Induction Heating |
|
Vol 10, No 3 (2019) |
Functional Coatings and Surface Treatment |
Increase in Wear Resistance of the Surface Layers of AK10M2N Silumin at Electron-Beam Treatment |
|
Vol 10, No 3 (2019) |
Functional Coatings and Surface Treatment |
Methods for Regulation of Physicochemical and Biological Properties of the Surface of Poly(hydroxybutyrate-co-hydroxyvalerate) Film Specimens |
|
Vol 10, No 3 (2019) |
Composite Materials |
Technological Parameters of Production and Properties of Babbit-Based Composite Surfacing Rods and Deposited Antifriction Coatings |
|
Vol 10, No 3 (2019) |
Composite Materials |
The Effect of Uniaxial Extrusion on the Degree of Reinforcement of Nanocomposites Polyvinyl Chloride/Boron Nitride |
|
Vol 10, No 3 (2019) |
Composite Materials |
Deformation Stimulated Luminescence of a Composite Produced on the Basis of Polymethylmethacrylate Transparent in the Visible Region and Finely Dispersed Powder of SrAl2O4:(Eu2+, Dy3+) Phosphor |
|
Vol 10, No 3 (2019) |
Composite Materials |
Using Nickel Nanopowders with Different Morphologies for Fabrication of Highly Porous Nickel Materials |
|
Vol 10, No 3 (2019) |
Composite Materials |
Dielectric Properties of Polyethylene/TiO2 Composites |
|
Vol 10, No 3 (2019) |
Composite Materials |
On Correlation between Powder Dispersity and Hysteresis Characteristics with Regard to Magnets Based on (Sm, Zr)(Co, Cu, Fe)z Alloys |
|
Vol 10, No 3 (2019) |
Composite Materials |
Metal-Carbon Nanocomposites FeNi/C: Production, Phase Composition, Magnetic Properties |
|
Vol 10, No 3 (2019) |
Composite Materials |
Formation and Structure Features of the Weld Joints Made by Friction Stir Welding |
|
Vol 10, No 3 (2019) |
Composite Materials |
Features of the Plastic Flow of Sintered Al–12Si–xSn Alloys |
|
Vol 10, No 3 (2019) |
Composite Materials |
Cold Sintering of Ni–Ag Nanocomposite Particles Produced by Electric Explosion of Wires |
|
Vol 10, No 3 (2019) |
New Methods of Treatment and Production of Materials with Required Properties |
Synthesis of Bimetal Fe–Pb Janus Nanoparticles via the Electric Explosion of Iron and Lead Conductors |
|
Vol 10, No 3 (2019) |
New Methods of Treatment and Production of Materials with Required Properties |
Kinetics of Reduction of α-Fe2O3 Nanopowder with Hydrogen under Power Mechanical Treatment in an Electromagnetic Field |
|
Vol 10, No 3 (2019) |
New Methods of Treatment and Production of Materials with Required Properties |
Measurement of Hydrogen Diffusion in Zirconium Alloys by the Radioluminography Method |
|
Vol 10, No 3 (2019) |
New Methods of Treatment and Production of Materials with Required Properties |
Concept of Plastic Gas and Model Medium for Dilatable Isotropic Materials |
|
Vol 10, No 3 (2019) |
New Methods of Treatment and Production of Materials with Required Properties |
Studying the Machinability of Tin-Bearing Free-Cutting Steel |
|
Vol 10, No 3 (2019) |
New Methods of Treatment and Production of Materials with Required Properties |
Structure Formation during Phase Separation of Poly(D,L-Lactide)–Tetraglycol–Antisolvent Ternary System |
|
Vol 10, No 3 (2019) |
New Methods of Treatment and Production of Materials with Required Properties |
Peculiarities of Application of the Gas Extraction Method for Determination of Hydrogen Content in Samples of Irradiated Zirconium Materials |
|
Vol 10, No 3 (2019) |
New Methods of Treatment and Production of Materials with Required Properties |
Stress-Sensory Properties of Amorphous Co-Alloy Wires with Negative Magnetostriction under Elastic Deformation |
|
Vol 10, No 3 (2019) |
New Methods of Treatment and Production of Materials with Required Properties |
Impact of Thermal Tests Simulating Dry Storage of VVER-1000 Fuel on the Hydride Phase Morphology in Fuel Element Claddings |
|
Vol 10, No 4 (2019) |
Article |
Features of Formation of the Structure of Nitrogenous Steel during High Temperature Thermomechanical Treatment |
|
Vol 10, No 4 (2019) |
Article |
Sensitivity of a Number of Physical Properties to Fixation of the Initial Stages of Aging of Fe–14.5% Mo Alloy |
|
Vol 10, No 4 (2019) |
Article |
Experimental Study of the Insulator-to-Metal Phase Transition in VO2 Thin Films in the Microwave Range |
|
Vol 10, No 4 (2019) |
Article |
Study of Interfacial Bonding in Composite Materials Based on NbSi Eutetic Reinforced with Single-Crystal α-Al2O3 Fibers with a W Coating |
|
Vol 10, No 4 (2019) |
Article |
Influence of Reinforcing Plant Fillers on the Strength Properties of Composite Materials with an Ice Matrix |
|
Vol 10, No 4 (2019) |
Article |
The Modification of Polyhydroxy Ether with Carbon Nanoparticles |
|
Vol 10, No 4 (2019) |
Article |
Porous Ceramics Based on Substituted Tricalcium Phosphates for Bone Tissue Recovery |
|
Vol 10, No 4 (2019) |
Article |
The Effect of Sulfur and Phosphorus Impurities on the Long-Term Strength of Single Crystals of the ZhS36-VI Alloy under Testing on the Basis of up to 1000 Hours |
|
Vol 10, No 4 (2019) |
Article |
Analysis of the Structure of Polyhydroxybutyrate-Based Fibrous Matrices for Prolonged Drug Release |
|
Vol 10, No 4 (2019) |
Article |
High-Frequency Magnetic Properties of Glass-Reinforced Plastic Laminate with Deposited Functional Thin-Film Coating Based on (Co40Fe40B20)60(SiO2)40 Nanocomposite |
|
Vol 10, No 4 (2019) |
Article |
Mechanical Properties of Titanium Nickelide–Tantalum–Chitosan Composite Material |
|
Vol 10, No 4 (2019) |
Article |
Dependence of Microhardness of Glass Composites on the Side of Float Glass Surface |
|
Vol 10, No 4 (2019) |
Article |
Production of Optically Transparent Shock-Resisting Ceramics by the Methods of Powder Metallurgy (Review) |
|
Vol 10, No 4 (2019) |
Article |
Obtaining a Material Based on β-SiC and Carbon Fibers Using an Electric Arc Technique |
|
Vol 10, No 4 (2019) |
Article |
Synthesis of the Nanoscale Calcium Hydroxyapatite from Calcium Malate and Ammonium Hydrophosphate |
|
Vol 10, No 4 (2019) |
Article |
Low-Cycle Fatigue of VZh175 Superalloy at Symmetric and Asymmetric Deformation |
|
Vol 10, No 4 (2019) |
Article |
Study of the Structure and Properties of High-Temperature Shape-Memory Alloys of the Ti–Pd–Ni and Ni–Ti–Hf Systems |
|
Vol 10, No 4 (2019) |
Article |
Layered Natural Minerals as Carriers of Active Components for Functional Materials |
|
Vol 10, No 4 (2019) |
Article |
Elaboration of Chemical Hydrogen Source Based on Hydrides of Magnesium Alloys |
|
Vol 10, No 4 (2019) |
Article |
Methylcellulose Films Partially Crosslinked by Iron Compounds |
|
Vol 10, No 4 (2019) |
Article |
Computer Database of Russian Arctic Materials |
|
Vol 10, No 4 (2019) |
Article |
Microhardness of Multilayer Composites |
|
Vol 10, No 4 (2019) |
Article |
Biocompatibility of Biodegradable Polymer Films Based on Poly(lactic-co-glycolic acid) of Various Molecular Weights |
|
Vol 10, No 4 (2019) |
Article |
New 10KhN3MD + 04Kh20N6G11M2AFB Two-Layer Steel with Full-Strength Base and Cladding Layers |
|
Vol 10, No 4 (2019) |
Article |
Analysis of Aluminum Alloy Powders for Additive Manufacturing Fabricated by Atomization |
|
Vol 10, No 4 (2019) |
Article |
The Investigation of the Chemical Composition, Structure, and Mechanical Properties of EP648 Alloy at Different Stages of Additive Manufacturing |
|
Vol 10, No 4 (2019) |
Article |
Polymorphic Single-Layer and Fibrillar Nanostructures of J-Aggregates of a Carbocyanine Dye |
|
Vol 10, No 4 (2019) |
Article |
Gold Nanoparticles in Bimetallic Nanoparticle Systems: Synthesis, Properties, and Application |
|
Vol 10, No 4 (2019) |
Article |
Investigation of the Pivoting Friction of ShKh15 Steel over R6M5 and 10R6M5-MP Steel with the Use of Mathematical Modeling |
|
Vol 10, No 4 (2019) |
Article |
Ordering of the Amorphous Phase as One of the Characteristics of Supramolecular Structure of Amorphous-Crystalline Polymer |
|
Vol 10, No 4 (2019) |
Article |
The Influence of the Strain Aging on the Mechanical Properties upon Extension in the Metal of X80 Strength Grade Pipes |
|
Vol 10, No 4 (2019) |
Article |
Change in the Microstructure of Ni Alloy Disk Workpieces for Gas Turbine Engines Produced by the HIP + Deformation Method |
|
Vol 10, No 4 (2019) |
Article |
Investigation of Microstructure of Weld Joints of BrKh1Tsr Bronze by Electron–Beam Welding |
|
Vol 10, No 4 (2019) |
Article |
Investigation of the Thermomechanical Characteristics of Feedstocks with Different Binder Types |
|
Vol 10, No 4 (2019) |
Article |
Austenite in Nanostructured Maraging Steel |
|
Vol 10, No 4 (2019) |
Article |
The Effect of Zirconium on the Formation Processes of Layered Composition Materials of Titanium–Aluminum and Durability of Aluminum Clutch with Titanium |
|
Vol 10, No 4 (2019) |
Article |
Thermodynamic and Kinetic Aspects of the Phosphorus Effect on the Stability of the Structure and Properties of Single-Crystal Refractory Nickel Alloys |
|
Vol 10, No 4 (2019) |
Article |
Analysis of Fractures of Metal Ceramic Hard Alloys of KNT Brand |
|
Vol 10, No 4 (2019) |
Article |
Influence of Thermal Cycling on Elemental Composition of VO2 and V1 –xFexO2 |
|
Vol 10, No 4 (2019) |
Article |
The Influence of CuO Dopant Nanoparticles, Prepared via the Arc Plasma Synthesis Method, on the Critical Current of YBa2Cu3O7 –δ Composites |
|
Vol 10, No 4 (2019) |
Article |
Stability of Ceramic-Ceramic Restorations for Orthopedic Dentistry |
|
Vol 10, No 4 (2019) |
Article |
Semiempirical Mathematical Models of the Pivoting Friction of ShKh15 Steel over R6M5 Steel according to the Ball–Plane Scheme with Consideration of Wear |
|
Vol 10, No 5 (2019) |
Physicochemical Principles of Creating Materials and Technologies |
Use of Constants of Carbon and Ultrahigh-Molecular-Weight Polyethylene Fiber for Calculation of Density of Unidirectional Composites |
|
Vol 10, No 5 (2019) |
Physicochemical Principles of Creating Materials and Technologies |
A New Approach to Development of Photochromic Composites Based on Hydrated Tungsten(VI) Oxide Particles and Cellulose Matrix |
|
Vol 10, No 5 (2019) |
Materials for Aerospace Technology |
Investigation of a High-Temperature Nb-Based Composite Material Mechanically Doped with Si |
|
Vol 10, No 5 (2019) |
Electronic Engineering Materials |
Magnetic Field Production Abilities of Thermoelectric Materials Based on Layered Crystals of the Family [(Ge, Sn, Pb) Te]m [(Bi, Sb)2 (Te, Se)3]n (m, n = 0, 1, 2, …) with Non-Isovalent Cationic Substitution |
|
Vol 10, No 5 (2019) |
Electronic Engineering Materials |
Thermoelectric and Elastic Properties of Carbon Nanotubes Irradiated with High-Energy Electrons |
|
Vol 10, No 5 (2019) |
Electronic Engineering Materials |
The Kinetics of Growth of a Nanosized Germanium Film Deposited on the Si(001) Surface by Magnetron Sputtering |
|
Vol 10, No 5 (2019) |
Electronic Engineering Materials |
Effect of Microimpurities on the Electronic Structure and Emission Properties of Microwave Device Cathode Materials |
|
Vol 10, No 5 (2019) |
Electronic Engineering Materials |
Effect of Preparation and Reduction on Specific Surface Electrical Resistance of Thin Films Obtained from Graphene Oxide Dispersion |
|
Vol 10, No 5 (2019) |
Materials of Power Engineering and Radiation-Resistant Materials |
Effect of Low-Temperature Ion Irradiation on the Nanostructure of 12% Chromium ChS-139 Steel |
|
Vol 10, No 5 (2019) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Ceramic Porous Materials with Catalytic Properties |
|
Vol 10, No 5 (2019) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Comparison of Impregnated Bone Morphogenetic Protein-2 Release Kinetics from Biopolymer Scaffolds |
|
Vol 10, No 5 (2019) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Stereolithographic 3D Printing of Bioceramic Scaffolds of a Given Shape and Architecture for Bone Tissue Regeneration |
|
Vol 10, No 5 (2019) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Effect of t-ZrO2-Based Ceramic Samples on the Condition of Muscular and Connecting Tissues in Experimental Animals with Intramuscular Introduction |
|
Vol 10, No 5 (2019) |
Materials for Ensuring Human Vital Activity and Environmental Protection |
Features of β-Phase Decay in Ti–22Nb–6Zr Alloy |
|
Vol 10, No 5 (2019) |
General-Purpose Materials |
Mechanical Properties of Structural Carbon-Carbon Layered Material at High Temperatures |
|
Vol 10, No 5 (2019) |
General-Purpose Materials |
Synthesis of Cu–Cr Composite Alloys with a Layered Structure Featuring High Arc Resistance |
|
Vol 10, No 5 (2019) |
General-Purpose Materials |
Highly Efficient Plasticizers-Antipirenes for Epoxy Polymers |
|
Vol 10, No 5 (2019) |
General-Purpose Materials |
Heat Emission Kinetics and Hydration Behavior of Modified Polymer–Cement Mixtures for 3D Printing Construction |
|
Vol 10, No 5 (2019) |
General-Purpose Materials |
Cermet Plasma Coatings Based on Silicon Carbide |
|
Vol 10, No 5 (2019) |
General-Purpose Materials |
Synthetic Titanosilicate Additives for Special Cement Composites |
|
Vol 10, No 5 (2019) |
General-Purpose Materials |
Effects of Low-Modulus BN Inclusions on Properties of Y-TZP Ceramic |
|
Vol 10, No 5 (2019) |
General-Purpose Materials |
Physical and Chemical Properties of Polyporphyrin Films Based on the Mn Complexes of Amino-Substituted Tetraphenylporphyrin |
|
Vol 10, No 5 (2019) |
General-Purpose Materials |
Research of Titanium Saturation with Gas and Feature of Ceramic Layer Formation Using the Oxidative Constructing Approach |
|
Vol 10, No 5 (2019) |
General-Purpose Materials |
Composite Binders for Concretes with Improved Impact Endurance |
|
Vol 10, No 5 (2019) |
General-Purpose Materials |
Advanced Materials for Separation and Purification of Gas Mixtures in Cyclic Adsorption Processes |
|
Vol 10, No 5 (2019) |
New Technologies for Design and Processing of Materials |
The Influence of Aluminum Nitride Nanoparticles on the Structure, Phase Composition, and Properties of TiB/Ti-Based Materials Obtained by SHS Extrusion |
|
Vol 10, No 5 (2019) |
New Technologies for Design and Processing of Materials |
Synthesis of Homogeneous Doping with Zinc Charge of Lithium Niobate and Comparative Study of LiNbO3:Zn Crystals of Different Genesis |
|
Vol 10, No 5 (2019) |
New Technologies for Design and Processing of Materials |
Synthesis of Composite Material in Al–Ti–B System during Combustion of Titanium and Boron Powders and Aluminum-Clad Granules of VT6 Alloy |
|
Vol 10, No 5 (2019) |
New Technologies for Design and Processing of Materials |
The Formation of the Surface Layers of a VT6 Titanium Alloy by Ion Beam Mixing of Carbon Nanofilms |
|
Vol 10, No 5 (2019) |
New Technologies for Design and Processing of Materials |
State of the Art and Prospect for Recycling of Waelz Slag from Electric Arc Furnace Dust Processing |
|
Vol 10, No 5 (2019) |
New Technologies for Design and Processing of Materials |
A Combined Method for Synthesis of Dense Nanoceramics Based on Aluminum Oxide |
|
Vol 10, No 5 (2019) |
New Technologies for Design and Processing of Materials |
Investigation of Formation of Titanium–Copper Coatings upon Argon Arc Surfacing of Silicon Bronze on Titanium |
|
Vol 10, No 5 (2019) |
New Technologies for Design and Processing of Materials |
Technological Characteristics of Injection Molding of Dynamic Elastoplasts Based on Thermoplastic Polyolefins and Butyl Rubber |
|
Vol 10, No 5 (2019) |
New Technologies for Design and Processing of Materials |
Granulated Sorption Material Based on Cellulose for Extracting Silver from Thiocyanate Solutions |
|
Vol 10, No 5 (2019) |
New Technologies for Design and Processing of Materials |
Chlorination of Alumina Obtained from Nepheline Concentrate Processing and Comparative Assessment of the Complete Aluminum Production Cycle |
|
Vol 10, No 5 (2019) |
New Technologies for Design and Processing of Materials |
Synthesis of Hard-Magnetic Material of the Fe–Cr–Co System Made of a Spherical Powder |
|
Vol 10, No 5 (2019) |
Methods of Study of Properties of Materials |
Use of Experimentally Determined Parameters of the Cohesive Zone in the Numerical Evaluation of the Resistance to Delamination of Polymer Composites Materials |
|
Vol 10, No 6 (2019) |
Metal Sciences. Metallurgy |
Scientific and Technological Bases for Developing Cold-Resistant Steel with a Guaranteed Yield Strength of 315–750 MPa for Arctic Conditions. Part 1: Alloying Principles and Requirements for Sheet Product Structure |
|
Vol 10, No 6 (2019) |
Metal Sciences. Metallurgy |
Scientific and Technological Bases for Developing Cold-Resistant Steel with a Guaranteed Yield Strength of 315–750 MPa for Arctic Conditions: Part 2. Manufacturing Technology, Structure, Properties, and Serviceability of Sheet Products |
|
Vol 10, No 6 (2019) |
Metal Sciences. Metallurgy |
Research of Recrystallization Processes in Low-Carbon Low-Alloy Steel in Modeling High-Temperature Rolling |
|
Vol 10, No 6 (2019) |
Metal Sciences. Metallurgy |
The Effect of Microalloying on Mechanical Properties of Low-Carbon Chromium–Nickel–Molybdenum Steel |
|
Vol 10, No 6 (2019) |
Metal Sciences. Metallurgy |
Structure and Properties of the Intermetallic Alloy Based on Nickel Aluminide Microalloyed with Rare Earth Metals |
|
Vol 10, No 6 (2019) |
Metal Sciences. Metallurgy |
Basic Physicochemical Concepts for Controlling the δ-Ferrite Content When Welding with Austenite-Ferrite Materials |
|
Vol 10, No 6 (2019) |
Metal Sciences. Metallurgy |
Modeling of Steel Hardening Process at Thermal and Mechanical Treatment |
|
Vol 10, No 6 (2019) |
Functional Materials |
Synthesis and Electron Beam Facing of Titanium Monoboride–Titanium Matrix Composite Powders |
|
Vol 10, No 6 (2019) |
Functional Materials |
Correlation of the Diamond/Matrix Interphase Zone Structure with Tool Efficiency Obtained by Technology Combining Metallization of Diamonds with Matrix Sintering |
|
Vol 10, No 6 (2019) |
Functional Materials |
Experimental Production of Cu–Cr–N Composite Alloys and Thermodynamic Modeling of Their Phase Composition |
|
Vol 10, No 6 (2019) |
Functional Materials |
The Influence of Technological Parameters of Cold Gas Dynamic Spraying on Wear Resistance of Aluminum–Carbon Nanofibers Coatings |
|
Vol 10, No 6 (2019) |
Functional Materials |
Catalytically Active Coatings for Systems of Steam Conversion of Natural Gas: Synthesis and Catalytic Properties |
|
Vol 10, No 6 (2019) |
Functional Materials |
Obtaining Functional Intermetallic Ni–Ti Coatings by Heterophase Transfer Combined with Laser Treatment |
|
Vol 10, No 6 (2019) |
Functional Materials |
Modern Approaches to the Development of Marine Antifouling Coatings |
|
Vol 10, No 6 (2019) |
Functional Materials |
Strength Improvement of Metals Produced by Selective Laser Melting of Powders |
|
Vol 10, No 6 (2019) |
Functional Materials |
Biotechnological Method of Obtaining Nanoparticles of Silver, Cadmium, and Zinc Sulfides. Physico-chemical Characteristics. Creation of Polymeric Nanocomposites |
|
Vol 10, No 6 (2019) |
Polymer Composite Materials |
Epoxy Radiotechnical Hot Pressed Glass Fiber Plastics for Ship Aerial Fairings and Protection of Antennas in Radio Connection and Radio Location Systems |
|
Vol 10, No 6 (2019) |
Polymer Composite Materials |
Heat-Resistant Antifriction Carbon Plastics for Sliding Bearings of Pumps of Ship Power Stations, Thermal and Nuclear Power Plants |
|
Vol 10, No 6 (2019) |
Polymer Composite Materials |
On the Microstructure and Chemical Composition of the Polyimide Film Surface and Condensed Substances after Long-Term Exposure at the Mir Space Station |
|
Vol 10, No 6 (2019) |
Polymer Composite Materials |
Factors Influencing the Fire-Resistance of Epoxy Compositions Modified with Epoxy-Containing Phosphazenes |
|
Vol 10, No 6 (2019) |
Polymer Composite Materials |
Organoplastic for Composite Hull Constructions Exploited in Marine Environment |
|
Vol 10, No 6 (2019) |
Polymer Composite Materials |
Main Directions for Research on the Development of Tribotechnical Composites Used in the Arctic Regions (Experience of North-Eastern Federal University in Yakutsk) |
|
Vol 10, No 6 (2019) |
Welding and Allied Processes. Welding Consumables and Technologies |
Mechanical Properties of the Welded Joints of the Pressed Aluminum–Magnesium 1565ch Alloy at Low and High Temperatures |
|
Vol 10, No 6 (2019) |
Welding and Allied Processes. Welding Consumables and Technologies |
Managing Welded Joint Formation at Electron-Beam Welding of Aluminum Alloys of Increased Thicknesses |
|
Vol 10, No 6 (2019) |
Radiation Materials Science |
Degradation of Fuel Cladding Materials Based on Zirconium after Operation in VVER-Type Reactors |
|
Vol 10, No 6 (2019) |
Radiation Materials Science |
Zirconium Alloys with Low Melting Points |
|
Vol 10, No 6 (2019) |
Structural and Technological Strength and Efficiency of Materials |
The Basic Principles of Assessment of the Structural Integrity and Lifetime of the BN-Type Fast Neutron Reactor Components Considering Material Degradation |
|
Vol 10, No 6 (2019) |
Structural and Technological Strength and Efficiency of Materials |
Quality Control of Steels for Large-Sized Welded Structures of the Arctic Shelf: Application of Russian and Foreign Requirements |
|
Vol 10, No 6 (2019) |
Simulation of Materials and Technological Processes |
A Mathematical Model of Radiation-Induced Shape Change in Fuel Subassemblies of the BN-Type Reactor Core and Its Implementation in the ANSYS Software Package |
|
Vol 10, No 6 (2019) |
Testing, Diagnostics and Quality Control of Materials |
X-ray Nondestructive Testing as an Essential Tool during Technology Design and Development of Modern Aircraft Materials |
|