Structure Changes of High-Strength Economically Alloyed Steel 09KhGN2MD (09CrMnNi2MoCu) In Tempering


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

The purpose of the present investigation is to determine the heat treatment parameters that ensure yield strength over 690 MPa in combination with toughness of at least 35 J/cm2 at temperature of –70°C in new economically alloyed cold-resistant steel. The effect of various quenching and tempering parameters on mechanical properties, structure of steel, and fracture mode of samples after impact tests at temperature of –70°C has been studied. The relationship between the properties, structure, and fracture mode of steel samples is shown. The heat treatment parameters of the investigated steel are determined.

About the authors

M. V. Golubeva

National Research Center Kurchatov Institute—CRISM Prometey

Author for correspondence.
Email: mail@crism.ru
Russian Federation, St. Petersburg, 191015

O. V. Sych

National Research Center Kurchatov Institute—CRISM Prometey

Email: mail@crism.ru
Russian Federation, St. Petersburg, 191015

E. I. Khlusova

National Research Center Kurchatov Institute—CRISM Prometey

Email: mail@crism.ru
Russian Federation, St. Petersburg, 191015

G. D. Motovilina

National Research Center Kurchatov Institute—CRISM Prometey

Email: mail@crism.ru
Russian Federation, St. Petersburg, 191015

E. V. Sviatysheva

National Research Center Kurchatov Institute—CRISM Prometey

Email: mail@crism.ru
Russian Federation, St. Petersburg, 191015

S. V. Rogozhkin

National Research Center Kurchatov Institute—Institute for Theoretical and Experimental Physics; National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)

Email: mail@crism.ru
Russian Federation, Moscow, 117218; Moscow, 115409

A. A. Lukyanchuk

National Research Center Kurchatov Institute—Institute for Theoretical and Experimental Physics

Email: mail@crism.ru
Russian Federation, Moscow, 117218

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2018 Pleiades Publishing, Ltd.