Email this article Physicomechanical Properties of Glacial Composite Materials Reinforced by Rusar-S Fibers
- Authors: Cherepanin R.N.1, Nuzhnyi G.A.1, Razomasov N.A.2, Goncharova G.Y.2, Buznik V.M.1
-
Affiliations:
- All-Russia Scientific Research Institute of Aviation Materials
- Bauman Moscow State Technical University
- Issue: Vol 9, No 1 (2018)
- Pages: 114-120
- Section: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/207186
- DOI: https://doi.org/10.1134/S2075113318010082
- ID: 207186
Cite item
Open Access
Access granted
Subscription Access
Abstract
Preparation of polymer composition materials with glacial matrix (GPCMs) from distilled water and aqueous solutions with high-molecular modifiers reinforced with Rusar-S aramid filaments is described. The physicomechanical properties of the composites are studied and the possibility of the control of their strength properties by varying the amount and topology of the reinforcing component is given. An improvement of strength properties of composites as compared to the glacial specimens prepared from distilled water is discovered.
About the authors
R. N. Cherepanin
All-Russia Scientific Research Institute of Aviation Materials
Author for correspondence.
Email: cherepaninr@gmail.com
Russian Federation, Moscow
G. A. Nuzhnyi
All-Russia Scientific Research Institute of Aviation Materials
Email: cherepaninr@gmail.com
Russian Federation, Moscow
N. A. Razomasov
Bauman Moscow State Technical University
Email: cherepaninr@gmail.com
Russian Federation, Moscow
G. Yu. Goncharova
Bauman Moscow State Technical University
Email: cherepaninr@gmail.com
Russian Federation, Moscow
V. M. Buznik
All-Russia Scientific Research Institute of Aviation Materials
Email: cherepaninr@gmail.com
Russian Federation, Moscow
