Manufacture of composites based on aluminum and shungite under high pressure conditions
- Authors: Vityaz P.A.1, Ilyushchenko A.F.2, Kolmakov A.G.3, Senyut V.T.2, Kheyfets M.L.4, Chernyak I.N.2
-
Affiliations:
- Presidium of the National Academy of Sciences of Belarus
- State Scientific and Production Association of Powder Metallurgy
- Institute of Metallurgy and Material Sciences
- State Scientific and Production Association Tsentr
- Issue: Vol 7, No 4 (2016)
- Pages: 478-481
- Section: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/205163
- DOI: https://doi.org/10.1134/S2075113316040365
- ID: 205163
Cite item
Abstract
In this work, the structure of aluminum alloy modified with shungite carbon additives after high-pressure thermal treatment is studied. Introducing shungite carbon into an aluminum matrix is shown to inhibit aluminum grain growth and to increase the microhardness of the composite.
Keywords
About the authors
P. A. Vityaz
Presidium of the National Academy of Sciences of Belarus
Email: mik-z@mail.ru
Belarus, Minsk
A. F. Ilyushchenko
State Scientific and Production Association of Powder Metallurgy
Email: mik-z@mail.ru
Belarus, Minsk
A. G. Kolmakov
Institute of Metallurgy and Material Sciences
Email: mik-z@mail.ru
Russian Federation, Moscow
V. T. Senyut
State Scientific and Production Association of Powder Metallurgy
Email: mik-z@mail.ru
Belarus, Minsk
M. L. Kheyfets
State Scientific and Production Association Tsentr
Author for correspondence.
Email: mik-z@mail.ru
Belarus, Minsk
I. N. Chernyak
State Scientific and Production Association of Powder Metallurgy
Email: mik-z@mail.ru
Belarus, Minsk