Email this article The influence of microadditives of ruthenium on the structure, corrosive-mechanical strength, and fractography of destruction of pseudo-alpha-titanium alloys
- Authors: Leonov V.P.1, Chudakov E.V.1, Malinkina Y.Y.1
-
Affiliations:
- NRC Kurchatov Institute—CRISM Prometey
- Issue: Vol 8, No 4 (2017)
- Pages: 556-565
- Section: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/206634
- DOI: https://doi.org/10.1134/S2075113317040165
- ID: 206634
Cite item
Open Access
Access granted
Subscription Access
Abstract
The investigation is focused on the study of the structure, fracture, and phase composition of standard industrial pseudo-alpha-titanium alloy and the same titanium alloy alloyed with ruthenium. Also, the possibility to increase the low-cycle fatigue and resistance to stress corrosion cracking of industrial titanium allow using cathodic alloying with ruthenium.
About the authors
V. P. Leonov
NRC Kurchatov Institute—CRISM Prometey
Author for correspondence.
Email: mail@crism.ru
Russian Federation, St. Petersburg, 191015
E. V. Chudakov
NRC Kurchatov Institute—CRISM Prometey
Email: mail@crism.ru
Russian Federation, St. Petersburg, 191015
Yu. Yu. Malinkina
NRC Kurchatov Institute—CRISM Prometey
Email: mail@crism.ru
Russian Federation, St. Petersburg, 191015
Supplementary files
