Email this article Mechanical Characteristics of Composites Based on β-Ca3(PO4)2/Poly(D,L-Lactide) and β-Ca3(PO4)2/Poly(ε-Caprolactone)
- Authors: Zuev D.M.1, Klimashina E.S.1, Evdokimov P.V.1, Filippov Y.Y.1, Putlyaev V.I.1
-
Affiliations:
- Moscow State University
- Issue: Vol 10, No 1 (2019)
- Pages: 109-113
- Section: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/207779
- DOI: https://doi.org/10.1134/S2075113319010416
- ID: 207779
Cite item
Open Access
Access granted
Subscription Access
Abstract
The mechanical characteristics are studied for macroporous composite implants on the basis of β‑Ca/PO4)2/polylactide and β-Ca/PO4)2/polycaprolactone obtained by means of thermal-extrusion 3D printing. The effect of the degree of filling exerted on the strength, Young’s modulus, and the characteristics of the material destruction is described for the polymer, as well as for the three-dimensional structure filled with phosphate cement.
About the authors
D. M. Zuev
Moscow State University
Email: filippovya@gmail.com
Russian Federation, Moscow, 119991
E. S. Klimashina
Moscow State University
Email: filippovya@gmail.com
Russian Federation, Moscow, 119991
P. V. Evdokimov
Moscow State University
Email: filippovya@gmail.com
Russian Federation, Moscow, 119991
Ya. Yu. Filippov
Moscow State University
Author for correspondence.
Email: filippovya@gmail.com
Russian Federation, Moscow, 119991
V. I. Putlyaev
Moscow State University
Email: filippovya@gmail.com
Russian Federation, Moscow, 119991
Supplementary files
