Some Aspects of Studying the Corrosion Processes in 25Kh1MF Steel Fasteners after Aluminizing
- Авторлар: Khovratovich I.M.1, Ptashnik A.V.2, Olenin M.I.2, Gorynin V.I.2, Berezhko B.I.2
-
Мекемелер:
- AO VMZ Krasny Oktyabr
- National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
- Шығарылым: Том 9, № 6 (2018)
- Беттер: 1182-1187
- Бөлім: Corrosion and Protection of Metals
- URL: https://journals.rcsi.science/2075-1133/article/view/207737
- DOI: https://doi.org/10.1134/S2075113318060217
- ID: 207737
Дәйексөз келтіру
Аннотация
Abstract—The resistance to atmospheric corrosion of 25Kh1MF steel after aluminizing and thermal improvement has been studied. It is established that the low resistance of the aluminized layer to atmospheric corrosion is caused by surface defects, such as cracks and the pores, or by the partial removal of the layer containing the Fe3Al intermetallic. In the aluminized layer containing ferrite doped with aluminum, aluminum nitrides that prevent the cold diffusion welding of mating thread surfaces of fasteners are found.
Авторлар туралы
I. Khovratovich
AO VMZ Krasny Oktyabr
Email: mail@crism.ru
Ресей, Volgograd, 400007
A. Ptashnik
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Ресей, St. Petersburg, 191015
M. Olenin
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Хат алмасуға жауапты Автор.
Email: mail@crism.ru
Ресей, St. Petersburg, 191015
V. Gorynin
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Ресей, St. Petersburg, 191015
B. Berezhko
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Ресей, St. Petersburg, 191015
Қосымша файлдар
