Texture formation in the surface layer of VT6 alloy targets irradiated by intense pulsed electron beams
- Authors: Shulov V.A.1, Gromov A.N.2, Teryaev D.A.1, Perlovich Y.A.3, Isaenkova M.G.3, Fesenko V.A.3
-
Affiliations:
- Moscow Aviation Institute (National Research University)
- Moscow Machine Building Enterprise
- National Research Nuclear University MEPhI
- Issue: Vol 8, No 3 (2017)
- Pages: 387-391
- Section: Effects of Energy Fluxes on Materials
- URL: https://journals.rcsi.science/2075-1133/article/view/206450
- DOI: https://doi.org/10.1134/S2075113317030212
- ID: 206450
Cite item
Abstract
The texture formed in the surface layer of a recrystallized VT6 titanium alloy irradiated by highcurrent pulsed electron beams (HEBs) in a melting mode is studied. It was ascertained that irradiation in the melting mode leads to the formation of compression texture and fine globular-lamellar structure in the surface layer with thickness of 20 μm with preferred orientation of α, α′, and α″ lamellae parallel or nearly parallel to the surface. Structural changes observed in the surface layer are the cause of improvement of fatigue strength of titanium alloy induced by HEB treatment.
About the authors
V. A. Shulov
Moscow Aviation Institute (National Research University)
Author for correspondence.
Email: shulovva@mail.ru
Russian Federation, Moscow, 125993
A. N. Gromov
Moscow Machine Building Enterprise
Email: shulovva@mail.ru
Russian Federation, Moscow, 125362
D. A. Teryaev
Moscow Aviation Institute (National Research University)
Email: shulovva@mail.ru
Russian Federation, Moscow, 125993
Yu. A. Perlovich
National Research Nuclear University MEPhI
Email: shulovva@mail.ru
Russian Federation, Moscow, 115409
M. G. Isaenkova
National Research Nuclear University MEPhI
Email: shulovva@mail.ru
Russian Federation, Moscow, 115409
V. A. Fesenko
National Research Nuclear University MEPhI
Email: shulovva@mail.ru
Russian Federation, Moscow, 115409