The Influence of Technological Parameters of Cold Gas Dynamic Spraying on Wear Resistance of Aluminum–Carbon Nanofibers Coatings
- Авторы: Skvortsova A.N.1, Tolochko O.V.2, Bobkova T.I.1, Vasilyeva E.A.1, Staritsyn M.V.1
-
Учреждения:
- National Research Center Kurchatov Institute—CRISM Prometey
- Peter the Great St. Petersburg Polytechnic University
- Выпуск: Том 10, № 6 (2019)
- Страницы: 1365-1371
- Раздел: Functional Materials
- URL: https://journals.rcsi.science/2075-1133/article/view/208127
- DOI: https://doi.org/10.1134/S2075113319060248
- ID: 208127
Цитировать
Аннотация
The microhardness, coefficient of friction, elastic modulus, elastic recovery coefficients, and plastic deformation resistance are determined for functional aluminum matrix–carbon nanofibers coatings. Wear rate tests were carried out to evaluate the wear resistance of functional coatings, as well as to predict their service life. The coatings with the best mechanical and wear resistance characteristics were distinguished as well.
Об авторах
A. Skvortsova
National Research Center Kurchatov Institute—CRISM Prometey
Автор, ответственный за переписку.
Email: mail@crism.ru
Россия, St. Petersburg, 191015
O. Tolochko
Peter the Great St. Petersburg Polytechnic University
Email: mail@crism.ru
Россия, St. Petersburg, 195251
T. Bobkova
National Research Center Kurchatov Institute—CRISM Prometey
Email: mail@crism.ru
Россия, St. Petersburg, 191015
E. Vasilyeva
National Research Center Kurchatov Institute—CRISM Prometey
Email: mail@crism.ru
Россия, St. Petersburg, 191015
M. Staritsyn
National Research Center Kurchatov Institute—CRISM Prometey
Email: mail@crism.ru
Россия, St. Petersburg, 191015
Дополнительные файлы
