Additive Technologies for Design of Structural Materials on the Basis of the Nanocenter of the National Research Center Kurchatov Institute—CRISM Prometey
- Authors: Zhukov A.S.1, Barakhtin B.K.1, Voznyuk A.V.1
-
Affiliations:
- National Research Center Kurchatov Institute—CRISM Prometey
- Issue: Vol 10, No 1 (2019)
- Pages: 135-139
- Section: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/207792
- DOI: https://doi.org/10.1134/S2075113319010404
- ID: 207792
Cite item
Abstract
At present, additive technologies which employ metal-powder compositions of various alloys as building materials are in demand. These technologies in some cases represent the only tool during the construction and recovery of bulk products of almost any shape and degree of complexity. In this work, the structure and mechanical properties of the specimens fabricated via selective laser melting from the powders of 12Kh18N10T and 03Kh16N15M3 stainless austenite steels are evaluated.
Keywords
About the authors
A. S. Zhukov
National Research Center Kurchatov Institute—CRISM Prometey
Author for correspondence.
Email: jouan2@gmail.com
Russian Federation, St. Petersburg
B. K. Barakhtin
National Research Center Kurchatov Institute—CRISM Prometey
Email: jouan2@gmail.com
Russian Federation, St. Petersburg
A. V. Voznyuk
National Research Center Kurchatov Institute—CRISM Prometey
Email: jouan2@gmail.com
Russian Federation, St. Petersburg