Influence of hydrogen embrittlement on the localization of plastic strain in Al–Cu–Mg alloy


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

The influence of hydrogen embrittlement of the aluminum Al–4%Cu–0.2%Mg alloy on the parameters of localized plastic strain is studied. Digital speckle photography is used to visualize the localized strain patterns in the D1 alloy. The velocity of localized deformation bands as a function of the yield strength for nonhydrogenated and hydrogenated samples is found.

Sobre autores

S. Barannikova

Institute of Strength Physics and Materials Science, Siberian Branch; National Research Tomsk State University; Tomsk State University of Architecture and Building

Autor responsável pela correspondência
Email: agl@ispms.tsc.ru
Rússia, Tomsk, 634021; Tomsk, 634050; Tomsk, 634003

A. Bochkareva

Institute of Strength Physics and Materials Science, Siberian Branch; Tomsk Polytechnic University

Email: agl@ispms.tsc.ru
Rússia, Tomsk, 634021; Tomsk, 634050

A. Lunev

Institute of Strength Physics and Materials Science, Siberian Branch; Tomsk Polytechnic University

Email: agl@ispms.tsc.ru
Rússia, Tomsk, 634021; Tomsk, 634050

V. Gorbatenko

Institute of Strength Physics and Materials Science, Siberian Branch

Email: agl@ispms.tsc.ru
Rússia, Tomsk, 634021

L. Zuev

Institute of Strength Physics and Materials Science, Siberian Branch; National Research Tomsk State University

Email: agl@ispms.tsc.ru
Rússia, Tomsk, 634021; Tomsk, 634050

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Ltd., 2017