Electrically Conductive Inks Based on Polymer Composition for Inkjet Printing


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Electrically conductive layers prepared by the inkjet printing method with the use of an ink on the basis of the electrically conductive poly(3,4-ethylenedioxythiophene) and carbon nanoparticles were studied. The physicochemical properties of the ink components were considered. The dependence of the electrical conductivity was measured as a function of temperature and time of formation of a dry layer.

Sobre autores

A. Sergeev

Moscow Polytechnic University

Autor responsável pela correspondência
Email: sashasergeew@mail.ru
Rússia, Bolshaya Semenovskaya ul., 38, Moscow, 107023

A. Tameev

Frumkin Institute of Physical Chemistry and Electrochemistry

Email: sashasergeew@mail.ru
Rússia, Leninskii pr. 31, Moscow, 199071

V. Zolotarevskii

Frumkin Institute of Physical Chemistry and Electrochemistry

Email: sashasergeew@mail.ru
Rússia, Leninskii pr. 31, Moscow, 199071

A. Vannikov

Moscow Polytechnic University; Frumkin Institute of Physical Chemistry and Electrochemistry

Email: sashasergeew@mail.ru
Rússia, Bolshaya Semenovskaya ul., 38, Moscow, 107023; Leninskii pr. 31, Moscow, 199071

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Ltd., 2018