Enhancement of mechanical and tribotechnical properties of structural steel by electrical discharge machining

Yu. K. Mashkov; M. Yu. Baybaratskaya; B. Sh. Alimbayeva

doi:10.1134/S2075113316010135

Enhancement of mechanical and tribotechnical properties of structural steel by electrical discharge machining

作者: Mashkov Y.K.¹, Baybaratskaya M.Y.², Alimbayeva B.S.²
隶属关系:
1. Omsk State Technical University
2. Omsk Autoarmoured Engineering Institute
期: 卷 7, 编号 1 (2016)
页面: 115-118
栏目: Article
URL: https://journals.rcsi.science/2075-1133/article/view/204759
DOI: https://doi.org/10.1134/S2075113316010135
ID: 204759

如何引用文章

全文:

开放存取

##reader.subscriptionAccessGranted##
受限制的访问

订阅存取

详细
作者简介
参考
补充文件
统计

详细

A thermodynamic model of an open system of alloying electrode–workpiece is proposed. Results of investigation on the influence of the material of alloying electrodes and machining conditions on the phase composition, topography, and mechanical and tribotechnical properties of processing surfaces are considered.