Synthesis and dry sliding behavior of composite coating with (R–OOO)FT polyimide matrix and tungsten disulfide nanoparticle filler
- Authors: Breki A.D.1, Didenko A.L.2, Kudryavtsev V.V.2, Vasilyeva E.S.1, Tolochko O.V.1, Kolmakov A.G.3, Gvozdev A.E.4, Provotorov D.A.5, Starikov N.E.5, Fadin Y.A.6
-
Affiliations:
- Peter the Great St. Petersburg Polytechnic University
- Institute of Macromolecule Compounds
- Baikov Institute of Metallurgy and Materials Science
- Tula State Pedagogical University
- Tula State University
- Institute of Problems of Mechanical Engineering
- Issue: Vol 8, No 1 (2017)
- Pages: 32-36
- Section: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/205919
- DOI: https://doi.org/10.1134/S2075113317010063
- ID: 205919
Cite item
Abstract
The synthesis of a composite coating with an (R–OOO)FT polyimide matrix is described and results of studying the tribological behavior of this coating are presented. Spherical 40-nm tungsten disulfide nanoparticles produced using gas-phase synthesis are used as a filler.
About the authors
A. D. Breki
Peter the Great St. Petersburg Polytechnic University
Email: gwozdew.alexandr2013@yandex.ru
Russian Federation, St. Petersburg, 195251
A. L. Didenko
Institute of Macromolecule Compounds
Email: gwozdew.alexandr2013@yandex.ru
Russian Federation, St. Petersburg, 199004
V. V. Kudryavtsev
Institute of Macromolecule Compounds
Email: gwozdew.alexandr2013@yandex.ru
Russian Federation, St. Petersburg, 199004
E. S. Vasilyeva
Peter the Great St. Petersburg Polytechnic University
Email: gwozdew.alexandr2013@yandex.ru
Russian Federation, St. Petersburg, 195251
O. V. Tolochko
Peter the Great St. Petersburg Polytechnic University
Email: gwozdew.alexandr2013@yandex.ru
Russian Federation, St. Petersburg, 195251
A. G. Kolmakov
Baikov Institute of Metallurgy and Materials Science
Email: gwozdew.alexandr2013@yandex.ru
Russian Federation, Moscow, 119991
A. E. Gvozdev
Tula State Pedagogical University
Author for correspondence.
Email: gwozdew.alexandr2013@yandex.ru
Russian Federation, Tula, 300026
D. A. Provotorov
Tula State University
Email: gwozdew.alexandr2013@yandex.ru
Russian Federation, Tula, 300012
N. E. Starikov
Tula State University
Email: gwozdew.alexandr2013@yandex.ru
Russian Federation, Tula, 300012
Yu. A. Fadin
Institute of Problems of Mechanical Engineering
Email: gwozdew.alexandr2013@yandex.ru
Russian Federation, St. Petersburg, 199178
Supplementary files
