Email this article Analysis of microplastic deformation processes of surface layers of nitrided structural steels
- Authors: Polyakov S.A.1,2, Kuksenova L.I.1, Lapteva V.G.1, Alekseyeva M.S.3
-
Affiliations:
- Institute of Machine Sciences
- Moscow State Technical University
- All Russian Research Institute of Aviation Materials
- Issue: Vol 7, No 4 (2016)
- Pages: 618-623
- Section: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/205546
- DOI: https://doi.org/10.1134/S2075113316040298
- ID: 205546
Cite item
Open Access
Access granted
Subscription Access
Abstract
A model of microplastic deformation in surface layers of nitrided structural steels under the incoherent boundaries of nanodisperse reinforcing particles formed upon thermochemical treatment is considered, allowing the adaptive evolution of deformation without the accumulation of defects at the near-boundary zones, which provides high wear resistance of the material.
Keywords
About the authors
S. A. Polyakov
Institute of Machine Sciences; Moscow State Technical University
Author for correspondence.
Email: alekseeva_ms@list.ru
Russian Federation, Moscow; Moscow
L. I. Kuksenova
Institute of Machine Sciences
Email: alekseeva_ms@list.ru
Russian Federation, Moscow
V. G. Lapteva
Institute of Machine Sciences
Email: alekseeva_ms@list.ru
Russian Federation, Moscow
M. S. Alekseyeva
All Russian Research Institute of Aviation Materials
Email: alekseeva_ms@list.ru
Russian Federation, Moscow
Supplementary files
