Structure and Strength of the ZhS32-VI Heat-Resistant Nickel Alloy Produced by the Method of Selective Laser Alloying on a Single-Crystal Substrate
- Авторлар: Petrushin N.V.1, Evgenov A.G.1, Zavodov A.V.1, Treninkov I.A.1
-
Мекемелер:
- All-Russian Research Institute of Aviation Materials
- Шығарылым: Том 9, № 4 (2018)
- Беттер: 620-627
- Бөлім: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/207520
- DOI: https://doi.org/10.1134/S2075113318040287
- ID: 207520
Дәйексөз келтіру
Аннотация
The structure of the ZhS32-VI heat-resistant alloy obtained by the method of selective laser alloying (SLA) on single-crystal substrates with the 〈001〉 and 〈111〉 crystallographic orientations is studied. It is established that the synthesized alloy inherits the 〈001〉 orientation from the single crystal of the substrate. After vacuum thermal treatment and hot isostatic pressing (HIP), the synthesized alloy has a heterophase γ + γ' + MC microstructure with the structural-phase characteristics typical of the monocrystalline ZhS32-VI alloy and shows high short-time strength values.
Авторлар туралы
N. Petrushin
All-Russian Research Institute of Aviation Materials
Хат алмасуға жауапты Автор.
Email: admin@viam.ru
Ресей, Moscow
A. Evgenov
All-Russian Research Institute of Aviation Materials
Email: admin@viam.ru
Ресей, Moscow
A. Zavodov
All-Russian Research Institute of Aviation Materials
Email: admin@viam.ru
Ресей, Moscow
I. Treninkov
All-Russian Research Institute of Aviation Materials
Email: admin@viam.ru
Ресей, Moscow
Қосымша файлдар
