Отправить статью по E-mail Managing Welded Joint Formation at Electron-Beam Welding of Aluminum Alloys of Increased Thicknesses
- Авторы: Sharonov N.I.1, Sharapov M.G.2
-
Учреждения:
- National Research Center UralVagonZavod—JSC Central Research Institute of Materials
- National Research Center Kurchatov Institute—CRISM Prometey
- Выпуск: Том 10, № 6 (2019)
- Страницы: 1456-1460
- Раздел: Welding and Allied Processes. Welding Consumables and Technologies
- URL: https://journals.rcsi.science/2075-1133/article/view/208143
- DOI: https://doi.org/10.1134/S2075113319060236
- ID: 208143
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
Abstract—The technology of electron beam welding of homogeneous and dissimilar welds of aluminum alloys 1561, 1560М, and 1980T1 has been developed. Beam scanning along the semielliptical trajectory has secured the quality of the welded parts with fine mechanical properties. The welding scheme and optimal modes have been determined. The results of mechanical and corrosion tests, as well as the results of the delayed failure tests, are presented. The technology is implemented for hydrofoil devices and for the manufacture of shipbuilding machinery components.
Об авторах
N. Sharonov
National Research Center UralVagonZavod—JSC Central Research Institute of Materials
Автор, ответственный за переписку.
Email: mail@crism.ru
Россия, St. Petersburg, 191014
M. Sharapov
National Research Center Kurchatov Institute—CRISM Prometey
Email: mail@crism.ru
Россия, St. Petersburg, 191015
Дополнительные файлы
