Features of Uniaxial and Biaxial Deformation of the Contact Boundary of Metals during Explosion Welding
- Autores: Aushev A.A.1, Balandina A.N.1, Grishin E.N.1, Drennov O.B.1, Podurets A.M.1, Tkachenko M.I.1
-
Afiliações:
- Russian Federal Nuclear Center
- Edição: Volume 9, Nº 3 (2018)
- Páginas: 504-508
- Seção: Composite Materials
- URL: https://journals.rcsi.science/2075-1133/article/view/207469
- DOI: https://doi.org/10.1134/S2075113318030048
- ID: 207469
Citar
Resumo
X-ray diffraction and scanning electron microscopy are used to study the nature of deformation of the contact boundary (weld seam) between dissimilar metals (Cu–Ti and Cu–Al) formed during explosion welding. Under biaxial dynamic loading, a significant plastic deformation of the contact zone and its heating up to higher temperatures are shown to occur. This is confirmed by the formation of intermetallic compounds in the weld seam. The level of plastic deformation of the weld zone can be estimated on the basis of the crystallization temperature of intermetallic compounds.
Palavras-chave
Sobre autores
A. Aushev
Russian Federal Nuclear Center
Autor responsável pela correspondência
Email: assa@astra.vniief.ru
Rússia, Sarov, 607188
A. Balandina
Russian Federal Nuclear Center
Email: assa@astra.vniief.ru
Rússia, Sarov, 607188
E. Grishin
Russian Federal Nuclear Center
Email: assa@astra.vniief.ru
Rússia, Sarov, 607188
O. Drennov
Russian Federal Nuclear Center
Email: assa@astra.vniief.ru
Rússia, Sarov, 607188
A. Podurets
Russian Federal Nuclear Center
Email: assa@astra.vniief.ru
Rússia, Sarov, 607188
M. Tkachenko
Russian Federal Nuclear Center
Email: assa@astra.vniief.ru
Rússia, Sarov, 607188
Arquivos suplementares
