Defektoskopiâ
ISSN 0130-3082 (Print)
Мәзір
Мұрағат
Бастапқы
Журнал туралы
Редакция тобы
Редакция саясаты
Авторларға арналған ережелер
Журнал туралы
Шығарылымдар
Іздеу
Ағымдағы шығарылым
Мұрағат
Байланыс
Барлық журналдар
Іздеу
Іздеу
Іздеу аумағы
Барлығы
Авторлар
Атауы
Түйіндеме
Терминдер
Толық мәтін
Парақтау
шығарылымдар
авторлар
атаулары бойынша
басқа журналдар
Кілтсөздер
Coherence Factor (CF)
Full Matrix Capture (FMC)
Total Focusing Method (TFM)
acoustic anisotropy
acoustic emission
antenna array
defect
eddy current
eddy current control
fiber Bragg grating
fiber optic sensor
flaw detection
image processing
infrared imager
integro-differential equation of magnetostatics
metallography
non-destructive testing
sensitivity
thermal testing
ultrasonic testing
ultrasound
Пайдаланушы
Пайдаланушының аты
Құпиясөз
Мені есте сақтау
Құпия сөзді ұмыттыңыз ба?
Тіркеу
Жазылу
Жазылымды тексеру үшін жүйеге кіріңіз
Хабарламалар
Қарау
Тіркелу
×
Іздеу
Іздеу
Іздеу аумағы
Барлығы
Авторлар
Атауы
Түйіндеме
Терминдер
Толық мәтін
Парақтау
шығарылымдар
авторлар
атаулары бойынша
басқа журналдар
Кілтсөздер
Coherence Factor (CF)
Full Matrix Capture (FMC)
Total Focusing Method (TFM)
acoustic anisotropy
acoustic emission
antenna array
defect
eddy current
eddy current control
fiber Bragg grating
fiber optic sensor
flaw detection
image processing
infrared imager
integro-differential equation of magnetostatics
metallography
non-destructive testing
sensitivity
thermal testing
ultrasonic testing
ultrasound
Пайдаланушы
Пайдаланушының аты
Құпиясөз
Мені есте сақтау
Құпия сөзді ұмыттыңыз ба?
Тіркеу
Жазылу
Жазылымды тексеру үшін жүйеге кіріңіз
Хабарламалар
Қарау
Тіркелу
Бастапқы
>
Іздеу
>
Автор туралы ақпарат
Автор туралы ақпарат
,
Шығарылым
Бөлім
Атауы
Файл
№ 7 (2023)
Articles
Analysis of the destruction processes of carbon fiber samples using acoustic emission and tensometry
№ 7 (2023)
Articles
Estimation of the segregation in a high carbon cast steel by thermoelectric power means
№ 7 (2023)
Articles
Efficiency of using different types of infrared imagers in active thermal nondestructive testing of delaminations in non-metals
№ 7 (2023)
Articles
Control of the appearance of fuel pellets ends surfaces in a conveyor production
№ 7 (2023)
Articles
Non-destructive evaluation of internal cracks in glass fiber reinforced composites using the laser shearing interferometry method
№ 7 (2023)
Articles
Technique for measuring the thickness of a non-conductive coatings on a non-magnetic electrically conductive base metals with automatic take account of the influence of the specific electrical conductivity of the base metal
№ 7 (2023)
Articles
Methodological issues of increasing the reliability of ultrasonic testing of railways
№ 7 (2023)
Articles
Some aspects of optical monitoring of pile foundations under the conditions of the far north
№ 7 (2023)
Articles
Influence of interfering parameters on the results of continuity control of coatings by the electric spark method
№ 8 (2023)
Articles
Ultrasonic adhesion control of special coatings
№ 8 (2023)
Articles
Digital equipment and algorithms for determining the basic parameters of piezoelectric elements in pulsed excitation mode
№ 8 (2023)
Articles
Density study of thermoexpanded graphite samples by acoustic amplitude-shadow method
№ 8 (2023)
Articles
Detection of echo signals from discontinuities due to the use of super-resolution procedures for the control of concrete piles by the impact method
№ 8 (2023)
Articles
Low-velocity impact damage detection in cfrp laminates based on ultrasonic phased-array ndt technique
№ 8 (2023)
Articles
A circular eddy current probe using miniature fluxgates for multi-orientation slit evaluation in steel components
№ 8 (2023)
Articles
Increasing the structural sensitivity of the residual magnetization and coercive force of steels
№ 8 (2023)
Articles
On the possibility of determining the elastic modulus of metals by the dynamic instrumented indentation method
№ 8 (2023)
Articles
Comparative analysis of acoustic anisotropy of pipes and sheets using SH- and tH-waves
№ 8 (2023)
Articles
The structure perfection studies of LiCaAlF6 crystals by laser acoustics technique
№ 9 (2023)
Articles
Application of the acoustic emission method for ranking by fatigue damage of the material of trunnions of drying cylinders of cardboard and paper-making machines
№ 9 (2023)
Articles
Development of an empirical model for damage degree assessment of steel specimens based on the results of acoustic emission signal flow statistical processing
№ 9 (2023)
Articles
Improvement of tfm-image quality due to correction of “parasitic” delays between antenna array elements
№ 9 (2023)
Articles
Features of propagation of lateral transverse ultrasonic wave in a flat layer of material
№ 9 (2023)
Articles
Thermal testing of corundum ceramic plates
№ 9 (2023)
Articles
Development of the algorithm for the movement of the measuring module of the system of automated non-destructive testing of the nozzle of a lpre
№ 9 (2023)
Articles
The possibilities of the electromagnetic-acoustic multiple shadow method when testing the threads of pump rods
№ 9 (2023)
Articles
Electromagnetic scanner of structurally heterogeneous media
№ 9 (2023)
Articles
Development of a sensor layout for a dynamic indentation device
№ 1 (2023)
Articles
Development of methods and devices for air-coupled ultrasonic through transmission testing of large-sized objects made of polymer composite materials
№ 1 (2023)
Articles
Ultrasonic testing of butt joints in electrotechnical steel plates using Lamb waves
№ 1 (2023)
Articles
On the acoustic method of control of spatial inhomogeneity of plastic deformation of weakly anisotropic orthotropic materials
№ 1 (2023)
Articles
Acoustic properties of aspen wood (Populus tremula),modified by ultrasonic method
№ 1 (2023)
Articles
Magnetic properties of 09G2S steel, manufactured by selective laser melting and cyclically deformed by tension
№ 1 (2023)
Articles
Normalization of proton-radiographic images of objects with quasi-uniform areal density
№ 1 (2023)
Articles
Investigation of rolling bearing weak fault diagnosis based on cnn with two-dimensional image
№ 2 (2023)
Articles
Reconstructing reflector images at the boundary between base metal and deposited metal using Plane Wave Imaging technology
№ 2 (2023)
Articles
Taking into account the stiffness of steel ropes when evaluating their tension force based on the results of measuring the natural frequency of oscillations
№ 2 (2023)
Articles
Ultrasonic inspection technology of welded joints obtained by spot friction welding
№ 2 (2023)
Articles
To solve one problem of magnetostatics for a pipe with a defect on the inner surface
№ 2 (2023)
Articles
Compressive thermal wave imaging for subsurface analysis
№ 2 (2023)
Articles
Solution of the inverse problem definition surfaces at electron beam additive manufacturing
№ 3 (2023)
Articles
On improving the efficiency of the pass-through electromagnetic-acoustic transducer of longitudinal waves
№ 3 (2023)
Articles
Acoustic emission cluster analysis of composite laminates with different interfacial fiber orientations based on gaussian mixture model
№ 3 (2023)
Articles
Nondestructive evaluation by eddy current and ultrasonic technique of 475�C embrittlement effects in dss duplex stainless steels and corrosion behavior
№ 3 (2023)
Articles
Optimization algorithm for sandwich detectors of x-ray radiation
№ 3 (2023)
Articles
Three-dimensional tomography of scattering inhomogeneities by a cylindrical multistatic probing system
№ 4 (2023)
Articles
Acoustical characteristics of solid elastic mediums with oriented microfructures
№ 4 (2023)
Articles
Multiple damage prediction in tubular rectangular beam model using frequency response-based mode shape curvature with back-propagation neural network
№ 4 (2023)
Articles
Possibilities of manual eddy current testing for measuring the depth of contact-fatigue cracks of the surface of rolling rails
№ 4 (2023)
Articles
Iterative reconstruction of images of aluminum casting taking into account prior information
№ 4 (2023)
Articles
Non-destructive testing of an aluminum alloy welded joint based on a mathematical model of the thermal welding process and computer microtomography
№ 4 (2023)
Articles
IR thermographic analysis of aperiodic energy entities in the atmosphere (tomsk phenomenon 17 years later)
№ 5 (2023)
Articles
Ultrasonic tomography using sparse antenna arrays and frequency domain post-processing
№ 5 (2023)
Articles
Acoustic and electromagnetic properties of a martensitic-aging ferro-nickel alloy with the addition of copper under mechanical tension
№ 5 (2023)
Articles
Algorithms of hysteresis interference
№ 5 (2023)
Articles
Calculation of the magnetic field strength from a semi-infinite cylinder placed in an arbitrary external field
№ 5 (2023)
Articles
Debonds and water-filled defects detection in honeycomb sandwich composites based on pulse infrared thermography ndt technique
№ 5 (2023)
Articles
The novel procedure of active thermal ndt: combining heating and forced cooling
№ 6 (2023)
Articles
Acoustic monitoring of steel production in the ladle-furnace unit
№ 6 (2023)
Articles
Using a magnetic flux leakage method to estimate railway track bolted joint gaps
№ 6 (2023)
Articles
Analysis of influencing factors of electrostatic detection system based on double electrode
№ 6 (2023)
Articles
Thermal nondestructive testing: traditional approaches and novel trends (review)
№ 6 (2023)
Articles
Development of approaches to real-time optical diagnostics for laser weld formation process using laser emission spectroscopy
№ 6 (2023)
Articles
Application of the parameters of the remagnetization curve`s spectral characteristics to determine the hardness of ferromagnetic material
№ 6 (2023)
Articles
Automatic system of individual dosimetric control Coros-333
№ 10 (2023)
Articles
Ultrasound tomography based on the coefficient inverse problem as a way to combat structural noise
№ 10 (2023)
Articles
Nondestructive testing of local microcracking in laboratory mineral samples using an acoustic technique with a laser source of ultrasound and its verification with x-ray computer tomorgaphy
№ 10 (2023)
Articles
Electrochemical realkalisation of carbonated cementitious matrix: characterization research to influence of time and current density
№ 10 (2023)
Articles
Quality control technique for structural elements from lightweight materials based on soft x-ray radiation
№ 10 (2023)
Articles
Theoretical investigations of temperature compensation of the results of the diagnosis of polymer composites by the method of two optical fiber
№ 10 (2023)
Articles
Development of a technique for applying pa and tofd methods for mechanized ultrasonic testing of welded joints of main pipelines using the USD-60FR-16/128 flaw detector
№ 10 (2023)
Articles
Comparative tests of mechanical characteristics and structure of basic and engineering plastic filaments for additive manufacturing
№ 10 (2023)
Articles
Application of acoustic emission and digital image correlation for detecting diffusion interlayers in dissimilar welded joints
№ 10 (2023)
Articles
Ultrasonic testing through a thickened cladding
№ 11 (2023)
Articles
Effect of elastic-plastic deformation by biaxial tension on the magnetic characteristics of the nickel
№ 11 (2023)
Articles
A new look at the controllability of parts with complex configuration in penetrant testing
№ 11 (2023)
Articles
Automated crack detection and a web tool using image processing techniques in concrete structures
№ 12 (2023)
Articles
Mirror-shadow method of ultrasonic testing of the railroad wheelset axles using the electromagnetic-acoustic method of wave generation and reception
№ 11 (2023)
Articles
Experimental studies of changes in the acoustic properties of spheroplastics
№ 12 (2023)
Articles
Parametric study of anomaly detection models for defect detection in infrared thermography
№ 12 (2023)
Articles
Detecting and evaluating water ingress in horizontally oriented aviation honeycomb panels by using automated thermal nondestructive testing
№ 11 (2023)
Articles
Tangential eddy current probe for testing of soldered joints of busbars in electrical machines
№ 12 (2023)
Articles
Automatic segmentation by the method of interval fusion with preference aggregation when recognizing weld defects
№ 11 (2023)
Articles
Experience in the use of a roller multi-element phased array transducer for estimating the thickness of the pipeline wall
№ 12 (2023)
Articles
Optical control of degradation of polytetrafluoroethylene films and its modification under electron irradiation
№ 11 (2023)
Articles
Model of influence of a rope defect on the spectrum of its free transverse vibrations
№ 12 (2023)
Articles
Scope of applicability of the technique for constructing magnetic induction lines for flaw defectometry of extended objects
№ 11 (2023)
Articles
Assessment of the influence of interfering factors on the measurement of the depth of surface cracks of rails during manual eddy current control
№ 12 (2023)
Articles
Experience in the development and application of metal detectors for medical purposes
№ 12 (2023)
Articles
Classification and sizing of surface defects of pipelines based on the results of complex diagnostics by ultrasonic, eddy current and visual and measuring methods of nondestructive testing
№ 1 (2024)
Acoustic methods
Measurement of ultrasonic pulse arrival time by constructing a signal model to determine its propagation velocity
№ 1 (2024)
Acoustic methods
Features of application of adaptive interferometric fiber sensors of acoustic emission to monitor the condition of polymer composite materials
№ 1 (2024)
Radiation methods
Study of additive manufacturing products using neutron imaging
№ 1 (2024)
Thermal methods
Application of laser scanning thermography and regression analysis to determine characteristics of defects in polymer composite materials
№ 1 (2024)
Thermal methods
Inspection of press joints based on the analysis of their deformation patterns under local thermal loading
№ 1 (2024)
Electromagnetic methods
Investigation of the possibility detection of defects in rail foot by mfl method
№ 1 (2024)
Comprehensive application of non-destructive testing methods
Diagnostic complex «MicroLab-Z2» for non-destructive evaluation of structural and deformation parameters of metal conscructions
№ 2 (2024)
Acoustic methods
Analysis and NDT applications of a gas discharge electroacoustic transducer
№ 2 (2024)
Acoustic methods
Experimental study of ultrasonic wave propagation in a long waveguide sensor for fluid-level sensing
№ 2 (2024)
Acoustic methods
Investigating electromagnetic acoustic emission signals denoising for alloy materials non-destructive detecting: a CRQA method
№ 2 (2024)
Non-destructive testing with penetrating agents
Reference blocks for penetrant testing
№ 2 (2024)
General issues of defectoscopy
Analysis of test results and test quality during certification of non-destructive testing specialists
№ 2 (2024)
General issues of defectoscopy
Modern trends in the application of thermoelectric method in non-destructive testing (review)
Осы сайт cookie-файлдарды пайдаланады
Біздің сайтты пайдалануды жалғастыра отырып, сіз сайттың дұрыс жұмыс істеуін қамтамасыз ететін cookie файлдарын өңдеуге келісім бересіз.< / br>< / br>
cookie файлдары туралы< / a>
TOP