A new look at the controllability of parts with complex configuration in penetrant testing

Мұқаба

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

A method is proposed to determine uncontrolled areas of aircraft engine parts in penetrant testing, taking into account the specifics of applying developers of different types (all forms according to ISO 3452-3). The main technological factors affecting the testability of surfaces of parts of complex geometry are presented. A method has been experimentally tested, which makes it possible to determine the uncontrolled zones of engine parts in penetrant testing, due to the specifics of applying different forms of developers. It has been established that when carrying out penetrant testing of parts, especially with complex configurations/geometry, the existing technologies for applying developers may not ensure its high-quality application to all controlled surfaces of parts, as was previously assumed based on the results of an expert assessment. It has been experimentally proven that such structural elements of parts as holes are controlled to a depth much less than the diameter.

Авторлар туралы

I. Kudinov

Federal State Unitary Enterprise �All-Russian Scientific Research Institute Of Aviation Materials Of The National Research Center �Kurchatov Institute� (Nrc �Kurchatov Institute� - VIAM)

Email: viamlab622@gmail.com
Moscow, Russia

A. Golovkov

Federal State Unitary Enterprise «All-Russian Scientific Research Institute Of Aviation Materials Of The National Research Center «Kurchatov Institute» (Nrc «Kurchatov Institute» - VIAM)

Moscow, Russia

V. Vakhov

Joint Stock Company «United Engine Corporation-Aviadvigatel» (JSC «Uec-Aviadvigatel»)

Perm, Russia

D. Skorobogatko

Federal State Unitary Enterprise �All-Russian Scientific Research Institute Of Aviation Materials Of The National Research Center �Kurchatov Institute� (Nrc �Kurchatov Institute� - VIAM)

Moscow, Russia

A. Generalov

Federal State Unitary Enterprise «All-Russian Scientific Research Institute Of Aviation Materials Of The National Research Center «Kurchatov Institute» (Nrc «Kurchatov Institute» - VIAM)

Moscow, Russia

Әдебиет тізімі

  1. ОСТ 1 90282-79 Качество продукции. Неразрушающий контроль. Капиллярные методы. М.: ФГУП "ВИАМ", 1979. 50 с.
  2. Moore Patrick O. (Ed.) Liquid Penetrant Testing // ASNT Nondestructive Testing Handbook. V. 2. 2008. 494 p.
  3. SAE AMS2647E Aerospace Material Specification, Fluorescent Penetrant Inspection. Aircraft and Engine Component Maintenance. 2014. 42 p.
  4. SAE AMS2644E Aerospace Material Specification, Inspection Material Penetrant. 2006. 27 p.
  5. ASTM E1417/E1417M - 16 Standard Practice for Liquid Penetrant Testing. 2016. 11 p.
  6. ASTM E165 - 09 Standard Practice for Liquid Penetrant Examination for General Industry. 2009. 17 p.
  7. ASTM E1208 - 10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process. 2010. 7 p.
  8. ASTM E1209 - 10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process. 2010. 7 p.
  9. ASTM E1210 - 10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process. 2010. 7 p.
  10. ASTM E1219 - 10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process. 2010. 6 p.
  11. ASTM E1220 - 10 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process. 2010. 6 p.
  12. ASTM E1418 - 10 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process. 2010. 6 p.
  13. ISO 3452-1-2013 Non-destructive testing - Penetrant testing Part 1: General principles. 2013. 7 p.
  14. DOT/FAA/AR-01/95 Study of the Factors Affecting the Sensitivity of Liquid Penetrant Inspections: Review of Literature Published from 1970 to 1998. January 2002. 51 p.
  15. Глазков Ю.А. Капиллярный контроль. М.: Спектр, 2013. 144 с.
  16. Ospennikova O.G., Kudinov I.I., Golovkov A.N., Generalov A.S., Skorobogatko D.S. An Assessment of the Сontrollability of the Main Parts of Aircraft Engines During Capillary Non-destructive Testing // Journal of Physics: Conference Series. 2020. V. 1891. doi: 10.1088/1742-6596/1891/1/012035
  17. АП-33 Авиационные правила. Часть 33. Нормы летной годности двигателей воздушных судов. 2012.
  18. Code of Federal Regulations. Title 14/ Chapter I/ Subchapter C/ Part 33 - Airworthiness Standards: Aircraft Engines. URL: https://www.ecfr.gov/.
  19. Department of defense handbook. Nondestructive evaluation system reliability assessment. 2009.p. MIL-HDBK-1823A, 7 April 2009.
  20. FAA US Department of Transportation Advisory Circular No: 33.14-1 2001 Damage Tolerance for High Energy Turbine Engine Rotors.
  21. FAA US Department of Transportation Advisory Circular No: 33.70-2 2009 Damage tolerance of hole features in high-energy turbine engine rotors.
  22. Каблов Е.Н., Оспенникова О.Г., Кудинов И.И., Головков А.Н., Генералов А.С., Князев А.В. Оценка вероятности выявления эксплуатационных дефектов в деталях авиационной техники из жаропрочных сплавов с использованием дефектоскопических жидкостей отечественного и зарубежного производства // Дефектоскопия. 2021. № 1. С. 64-71. doi: 10.31857/S0130308221010073
  23. Головков А.Н., Куличкова С.И., Кудинов И.И., Скоробогатько Д.С. Анализ существующих контрольных образцов для проверки чувствительности дефектоскопических материалов при проведении капиллярного неразрушающего контроля (обзор) // Труды ВИАМ: электрон. науч.-технич. журн. 2019. № 11. Ст. 95. URL: http://www.viam-works.ru (дата обращения 10.12.2022). doi: 10.18577/2307-6046-2019-0-11-95-103
  24. ГОСТ Р ИСО 3452-3-2009 Контроль неразрушающий. Проникающий контроль. Часть 3. Испытательные образцы. 2009. 12 с.
  25. ISO 3452-3-2013 Non-destructive testing - Penetrant testing. Part 3: Reference test block. 2013. 12 p.
  26. Скоробогатько Д.С., Головков А.Н., Кудинов И.И., Куличкова С.И. К вопросу об экотоксичности и эффективности различных классов промышленных неионогенных пав, используемых при очистке металлических поверхностей в процессе капиллярного контроля деталей авиационной техники (ОБЗОР) //Авиационные материалы и технологии: электрон. науч.-технич. журн. 2021. № 4. Ст. 11. URL: http://www.journal.viam.ru (дата обращения 24.12.2021). doi: 10.18577/2713-0193-2021-0-4-98-106
  27. Куличкова С.И., Головков А.Н., Кудинов И.И., Скоробогатько Д.С. Оценка эффективности различных способов нанесения порошковых проявителей при проведении капиллярного контроля // Труды ВИАМ: электрон. науч.-технич. журн. 2022. № 10 (116). Ст. 10. URL: http://www.viam-works.ru. (дата обращения 22.11.2022). doi: 10.18577/2307-6046-2022-0-10-116-127
  28. ГОСТ Р 58989-2020 Двигатели газотурбинные авиационные. Неразрушающий контроль основных деталей. Общие требования. 2020. 10 с.

© Russian Academy of Sciences, 2023

Осы сайт cookie-файлдарды пайдаланады

Біздің сайтты пайдалануды жалғастыра отырып, сіз сайттың дұрыс жұмыс істеуін қамтамасыз ететін cookie файлдарын өңдеуге келісім бересіз.< / br>< / br>cookie файлдары туралы< / a>