Analysis of the destruction processes of carbon fiber samples using acoustic emission and tensometry

With samples made of carbon fiber, static tests were carried out to failure. Defects were controlled using acoustic emission and tensometry. Four wire strain gauges were glued to each sample in the area of the hole, and four piezoelectric gauges were installed along its edges, forming the working zone of control. Registration of signals associated with the destruction of the composite material of the samples, and their location was carried out by the acoustic emission system. In the process of testing, the tensometric system recorded loads and deformations, at which the process of destruction of carbon plastics began. The types of destruction were determined during the analysis of micro-glyphs, which were made from location zones. The main informative parameters (amplitude, dominant frequency, MARSE, structural coefficient) of acoustic emission signals were associated with the type of failure of carbon fiber reinforced plastics.

samples, carbon fiber, static loading, deformation, defect, acoustic emission, location, strain gauge