| Issue |
Title |
File |
| Vol 5, No 1 (2011) |
Hybrid electric vehicle development with mathematical simulation software application |
(Rus)
|
|
Cheranev S.V.
|
| Vol 8, No 3-1 (2014) |
Hybrid powerplant with the function of an asymmetric distribution of power flow through inter-wheel differential |
(Rus)
|
|
Dementyev Y.V., Krutashov A.V., Deev O.I.
|
| Vol 1, No 2 (2007) |
Hybrid Propulsion System with Regenerative Turbine Engine and High-temperature Fuel Cell |
(Rus)
|
|
Kustarev Y.S., Merkulov V.I., Kostyukov A.V., Dikov A.V.
|
| Vol 1, No 2 (2007) |
Hybrid Vehicles are the Solution of Environmental Problems of Road Transport |
(Rus)
|
|
Selifonov V.V., Karpukhin K.E., Filonov A.I., Baulina E.E., Avrutsky E.V.
|
| Vol 5, No 2 (2011) |
Hydraulic drive fan for cooling an automobile engine |
(Rus)
|
|
Trukhanov K.A.
|
| Vol 18, No 2 (2024) |
Hydraulic tests of a new centrifugal pump with shrouded impeller for extracorporeal membrane oxygenation systems |
(Rus)
|
|
Isaeva M.S., Petrov A.I., Banin E.P.
|
| Vol 6, No 2-4 (2012) |
Hydrodynamics of free floating gas shells in inclined pipes with granular nozzle |
(Rus)
|
|
Pokusaev B.G., Nekrasov D.A., Karpenko A.S., Khramtsov D.P.
|
| Vol 7, No 1-1 (2013) |
Hydrostatic drive in transmissions of special self-propelled vehicles |
(Rus)
|
|
Krumboldt L.N., Golovashkin F.P., Strelkov A.G.
|
| Vol 3, No 2 (2009) |
Hydrostatic transmission application in automotive vehicles |
(Rus)
|
|
Kurmaev R.H., Petrov S.E.
|
| Vol 9, No 2-1 (2015) |
Hydrostatic transmission of articulated transport and technological machines |
(Rus)
|
|
Gladov G.I., Zaytsev S.V., Kupreyanov A.A.
|
| Vol 1, No 2 (2007) |
Identification of a Vehicle Engine Operation for Use in a Mathematical Model of its Motion (by an example of DT466 engine) |
(Rus)
|
|
Lepeshkin A.V., Kurmaev R.K., Katanaev N.K.
|
| Vol 7, No 3-1 (2013) |
Identification of cyclic derived ketosulfides |
(Rus)
|
|
Gnevasheva L.M., Gnevashev D.A.
|
| Vol 17, No 4 (2023) |
Identification of maximal cyclic pressure with the non-motorized method based on specific refraction |
(Rus)
|
|
Plotnikov S.A., Gnevashev P.V., Smolnikov M.V., Shishkin G.P.
|
| Vol 7, No 2-1 (2013) |
Identification of parameters of the resistance movement of wheeled vehicles during operation |
(Rus)
|
|
Shadrin S.S.
|
| Vol 8, No 3-4 (2014) |
Identification of polyfunctional cyclic ketals |
(Rus)
|
|
Gnevasheva L.M., Gnevashev D.A.
|
| Vol 9, No 4-1 (2015) |
Identification of the longitudinal movement of the vehicle in free-wheel mode |
(Rus)
|
|
Katanaev N.T., Lepeshkin A.V., Kolbasov A.F.
|
| Vol 6, No 2-2 (2012) |
Identification of the most significant areas of parameters estimation in development of the criterial approach for the selection of measurements means in designing and modernization of technological processes |
(Rus)
|
|
Shtunder A.L.
|
| Vol 15, No 3 (2021) |
Identification of vehicle directional parameters using the sigma-point Kalman filters |
(Rus)
|
|
Chaplygin A.V., Kulikov I.A.
|
| Vol 8, No 4-5 (2014) |
Ideological origins of integral approach to society in philosophy of P.A. Sorokin |
(Rus)
|
|
Golovko Y.V.
|
| Vol 11, No 2 (2017) |
Ignition of poor fuel-air mixtures in gasoline-driven ICEs - problems, solutions |
(Rus)
|
|
Egorushkin E.A., Shabanov A.V., Shabanov A.A.
|
| Vol 4, No 1 (2010) |
Ignition Systems with Automatic Control of the Quality of Fuel Combustion in the Cylinders of Combustion Engines |
(Rus)
|
|
Melnikov A.A.
|
| Vol 9, No 4-5 (2015) |
Impact of innovation on competitiveness of corporation of fuel and energy complex |
(Rus)
|
|
Gridchina A.V.
|
| Vol 9, No 4-1 (2015) |
Impact of wind effects on the loading of hydraulic cranes-manipulators with articulated booms |
(Rus)
|
|
Kovalskiy V.F., Lagerev I.A.
|
| Vol 8, No 4-5 (2014) |
Implementation of career oriented training of student on the basis of Resource Center of university |
(Rus)
|
|
Tsybizova T.Y.
|
| Vol 9, No 4-5 (2015) |
Import substitution as a factor of increasing in the competitiveness of Russian enterprises |
(Rus)
|
|
Novichkova M.A., Schuplova A.A., Nosova S.S.
|
| Vol 5, No 2 (2011) |
Importance of Credit Norms in Student Physical Education |
(Rus)
|
|
Frolov V.G., Chernov Y.I.
|
| Vol 6, No 2-2 (2012) |
Importance of simplicial sets in quality management of technical products |
(Rus)
|
|
Martishkin V.V., Fazlulin E.M.
|
| Vol 6, No 2-4 (2012) |
Improvement and automation of sample preparation of environmental components to chemical analysis in case of emergency |
(Rus)
|
|
Latishenko K.P., Mironov A.A., Tsikunov V.S.
|
| Vol 5, No 1 (2011) |
Improvement in the method of integral force diagrams for evaluating controllability and stability of the car |
(Rus)
|
|
Bakhmutov S.V., Akhmedov A.A., Orlov A.B.
|
| Vol 8, No 2-2 (2014) |
Improvement of cylindrical spur gears wear resistance |
(Rus)
|
|
Gorlenko O.A., Makarov G.N.
|
| Vol 11, No 4 (2017) |
Improvement of design of water evaporative air coolers in tractor cabins |
(Rus)
|
|
Mikhaylov V.A., Sharipova N.N., Dmitriev M.I.
|
| Vol 2, No 2 (2008) |
Improvement of Ecological and Energy Indexes of FWD Vehicles with Hydrostatic Transmission due to the Optimal Development of Electronic Control System |
(Rus)
|
|
Kurmaev R.K., Malkin M.A.
|
| Vol 8, No 4-5 (2014) |
Improvement of efficiency for industrial enterprise: methods and directions |
(Rus)
|
|
Lyasnikov N.V., Dudin M.N., Gorokhova A.E.
|
| Vol 8, No 1-2 (2014) |
Improvement of fatigue resistance of parts using technological methods |
(Rus)
|
|
Uryadov S.A.
|
| Vol 13, No 1 (2019) |
Improvement of four-wheel drive vehicle controllability with a connected front axle through the redistribution of torque |
(Rus)
|
|
ZHilejkin M.M., EHranosyan A.V.
|
| Vol 2, No 2 (2008) |
Improvement of Geometrical Parameters of Surface Quality in Process of Broaching on the Basis of Modernization of Cutting Tool Design |
(Rus)
|
|
Bekayev A.A., Shchedrin A.V., Skoromnov V.M.
|
| Vol 8, No 1-2 (2014) |
Improvement of helical surfaces machining |
(Rus)
|
|
Shchavelev P.A., Klepikov V.V., Soldatov V.F.
|
| Vol 3, No 1 (2009) |
Improvement of Labor Protection in the Scientific-Production Association of Measurement Technique |
|
|
Grafkina M.V., Angelova M.V.
|
| Vol 12, No 1 (2018) |
Improvement of methods for calculating the interaction of propellers of multi-axle wheeled vehicles with barrier obstacles |
(Rus)
|
|
Papunin A.V., Belyakov V.V.
|
| Vol 8, No 2-2 (2014) |
Improvement of multi-dimensional processing efficiency by layout optimization of multi-axis machine tools |
(Rus)
|
|
Lukina S.V., Ivannikov S.N., Manaenkov I.V.
|
| Vol 7, No 1-2 (2013) |
Improvement of prefabricated cutting tools for heavy lathes |
(Rus)
|
|
Muzykant I.A., Maksimov Y.V., Litvinov A.S., Mironenko E.V., Gusenko V.S., Mirantsov S.L.
|
| Vol 8, No 3-5 (2014) |
Improvement of quality of accounting information on the performance of small and medium-sized enterprises |
(Rus)
|
|
Rozhnova O.V., Kovaleva O.B.
|
| Vol 8, No 4-5 (2014) |
Improvement of quality of processing of applications of citizens and organizations to the federal bodies of state power |
(Rus)
|
|
Barykin D.V., Boronnikov D.A., Fedulova Z.M., Samokhin I.E., Morozov S.V.
|
| Vol 8, No 4-2 (2014) |
Improvement of technology of manufacturing "body pump" parts of EPAN composite material reinforced by nanoscale carbon fibers |
(Rus)
|
|
Kostikov V.I., Eremeeva Z.V., Nitkin N.M., Sharipzyanova G.H., Slyuta D.N.
|
| Vol 6, No 2-4 (2012) |
Improvement of the maintenance process of highly qualified personnel quality in the university |
(Rus)
|
|
Sorokina G.P., Medova O.V., Borovin Y.M., Tikhanovskaya S.M.
|
| Vol 5, No 1 (2011) |
Improvement of the stability of the tractor within the units with front mounting |
(Rus)
|
|
Gamaleyev P.P., Zeygerman A.S., Kursov I.V., Marshalov E.S., Ploshchadnov A.N., Yakovlev P.Y.
|
| Vol 9, No 2-1 (2015) |
Improvement of the system of collective defense and providing of habitability of combat units of military vehicles |
(Rus)
|
|
Kotrovskiy A.A., Smirnov I.A., Denisov A.V.
|
| Vol 7, No 1-5 (2013) |
Improvement of the system of indicators of strategic innovative projects of development of Russian automotive enterprises taking into account the human factor |
(Rus)
|
|
Nevelev V.A., Vasin V.A., Astafyeva I.A.
|
| Vol 8, No 1-2 (2014) |
Improvement of the technology of cutting modified globoidal gears with localized contact patch |
(Rus)
|
|
Fedotov B.F., Dumilin S.V., Schegolkov N.N., Belyakov V.N.
|
| Vol 6, No 2-1 (2012) |
Improving environmental quality of transport diesel by use of physical and chemical effects on the operating cycle |
(Rus)
|
|
Fomin V.M., Hergeledji M.V., Atrash R.
|
| Vol 8, No 1-3 (2014) |
Improving of motor vehicles performance through use of high-performance additives |
(Rus)
|
|
Zarubin V.P., Kiselev V.V., Puchkov P.V., Toporov A.V.
|
| Vol 2, No 1 (2008) |
Improving of Normative Document Study on the Basis of Improving the Methodological Support of Diploma Projects |
(Rus)
|
|
Andrukh O.N., Korotkova L.N.
|
| Vol 2, No 2 (2008) |
Improving of Set of Tooling Quality (glass forms) by means of CAD System KOMPAS 3D V8 |
(Rus)
|
|
Makhin A.V., Sanayev N.K.
|
| Vol 7, No 1-1 (2013) |
Improving of starting characteristics of petrol-ethanol internal combustion engines during cold start and warm-up |
(Rus)
|
|
Lavrov S.V., Abramov A.A.
|
| Vol 7, No 1-6 (2013) |
Improving of the training of technical university graduates in terms of innovative development of economy |
(Rus)
|
|
Kazakova S.A., Meshcheryakova E.V.
|
| Vol 8, No 1-1 (2014) |
Improving the dynamic characteristics of the hydraulic drive when braking |
(Rus)
|
|
Gurevich Y.Y., Ivochkin M.Y.
|
| Vol 15, No 1 (2021) |
Improving the efficiency and safety of operation of underground tunnel escalators. Forecasting model |
(Rus)
|
|
Popov V.A., Yelantsev V.V.
|
| Vol 8, No 1-2 (2014) |
Improving the efficiency of assembly processes of gas turbine engines rotors, based on simulation technologies |
(Rus)
|
|
Timofeev М.В., Timofeeva Е.В.
|
| Vol 8, No 1-2 (2014) |
Improving the efficiency of assembly technology for fuel injectors of gas-turbine engines by management of functional parameters of spray package parts |
(Rus)
|
|
Semenov A.N., Sazanov A.A.
|
| Vol 7, No 4-2 (2013) |
Improving the efficiency of calculation of gear trains and worm drives |
(Rus)
|
|
Lukyanov A.S., Starikov A.I.
|
| Vol 8, No 4-5 (2014) |
Improving the efficiency of higher education and personality-oriented learning |
(Rus)
|
|
Bagramiants N.L.
|
| Vol 9, No 4-5 (2015) |
Improving the efficiency of the strategic management of competitiveness of Russian innovative cars, taking into account the factor of import target |
(Rus)
|
|
Nevelev V.A., Koshel I.S.
|
| Vol 9, No 1-5 (2015) |
Improving the efficiency of use of material resources as the basis of sustainable development |
(Rus)
|
|
Govorina E.A., Ostapenko G.F.
|
| Vol 16, No 2 (2022) |
Improving the energy and environmental performance of a diesel internal combustion engine by using a hydrogen-containing additive |
(Rus)
|
|
Dunin A.Y., Shabanov A.V., Nguyen T.Q., Shatrov M.G., Golubkov L.N.
|
| Vol 13, No 1 (2019) |
Improving the energy efficiency of vehicle electrical systems |
(Rus)
|
|
CHernov A.E., Akimov A.V.
|
| Vol 9, No 4-5 (2015) |
Improving the motivation of human economic activity as a factor in the growth of efficiency of the organization |
(Rus)
|
|
Mesherskiy I.G., Platonova A.S., Nosova S.S.
|
| Vol 14, No 4 (2020) |
Improving the operational efficiency of the linear type peristaltic pump |
(Rus)
|
|
Grishin A.I.
|
| Vol 16, No 4 (2022) |
In memory of Konstantin I. Gorodetsky |
(Rus)
|
|
Editorial B.
|
| Vol 17, No 2 (2023) |
In memory of Sergey V. Bakhmutov |
(Rus)
|
|
Arseniev S.E.
|
| Vol 8, No 1-2 (2014) |
Increase in objectivity of selection of part blanks |
(Rus)
|
|
Medvedev O.A.
|
| Vol 7, No 1-6 (2013) |
Increase of competitiveness of the university on the basis of organization of targeted training of personnel for the defense-industrial complex of the country |
(Rus)
|
|
Andrukh O.N., Sidorova A.S., Chanudeli M.K.
|
| Vol 8, No 1-2 (2014) |
Increase of cutting tool wear resistance by diffusion mesh cover coating |
(Rus)
|
|
Chekalova E.A., Chekalov P.D.
|
| Vol 8, No 1-2 (2014) |
Increase of cutting tool wear resistance by mesh cover coating |
(Rus)
|
|
Chekalova E.A., Chekalov P.D.
|
| Vol 6, No 2-1 (2012) |
Increase of dynamic qualities of diesel generator in the supplementary energy system of road train |
(Rus)
|
|
Fomin A.P.
|
| Vol 6, No 1 (2012) |
INCREASE OF EFFECTIVENESS OF A ROTARY HEAT EXCHANGER OF A SMALL-SIZE GAS TURBINE ENGINE |
(Rus)
|
|
Kostyukov A.V., Alekseev R.A.
|
| Vol 3, No 2 (2009) |
Increase of effectiveness of two-shaft gas-turbine power units |
(Rus)
|
|
Kustarev Y.S., Kostyukov A.V., Plykin M.E.
|
| Vol 10, No 2 (2016) |
Increase of efficiency of alternative fuels use in transport |
(Rus)
|
|
Fomin V.M.
|
| Vol 8, No 2-2 (2014) |
Increase of functional reliability of hydraulic actuator of load-lifting devices |
(Rus)
|
|
Bekaev A.A., Maximov Y.V., Strokov P.I., Musakova T.V., Paponov A.V.
|
| Vol 8, No 1-2 (2014) |
Increase of metal utilization factor through the use of combined operations of drawing-flanging in manufacture of box-shaped parts with a hole in a bottom part |
(Rus)
|
|
Nikitenko V.M.
|
| Vol 6, No 2-2 (2012) |
Increase of productivity of processing the pneumo - and hydraulic cylinders by enhancement of the device for combined machining and surface plastic deformation |
(Rus)
|
|
Pini B.E., Maximov Y.V., Ankin A.V., Adeev A.S.
|
| Vol 14, No 3 (2020) |
Increase of strength of cast-iron cylinder liners of engines of road construction vehicles |
(Rus)
|
|
Ovsyannikov V.E., Shpitko G.N., Nekrasov R.Y., Vas'kov D.E.
|
| Vol 10, No 4 (2016) |
Increase of the accuracy and reliability of output parameters determination of vehicle Integrated Navigation Systems |
(Rus)
|
|
Novikov P.V., Sheypak A.A., Gerdi V.N., Novikov V.V.
|
| Vol 17, No 1 (2023) |
Increasing efficiency and safety of operation of underground tunnel escalators. The software architecture |
(Rus)
|
|
Popov V.A., Elantsev V.V.
|
| Vol 7, No 1-4 (2013) |
Increasing of antijamming ability in digital transmission systems |
(Rus)
|
|
Lvov A.A., Svetlov M.S., Rudenko A.E., Martinov P.V.
|
| Vol 6, No 2-2 (2012) |
Increasing of cutting efficiency of heat-treated steel through the application of cutting tools of high-strength composite ceramic with coating E. S. Sotova, M. N. Lazareva |
(Rus)
|
|
Sotova E.S., Lazareva M.N.
|
| Vol 7, No 1-2 (2013) |
Increasing of efficiency of carbide tools by means of using of activated air |
(Rus)
|
|
Chekalova E.A., Chekalov P.D.
|
| Vol 7, No 3-2 (2013) |
Increasing the accuracy of the quantitative analysis biotechnological media for the content of labile components by using thin layer chromatography |
(Rus)
|
|
Zubov D.V., Soltanly N.M.
|
| Vol 15, No 3 (2021) |
Increasing the efficiency and safety of operation of underground tunnel escalators. Management of risks |
(Rus)
|
|
Popov V.A., Yelantsev V.V.
|
| Vol 11, No 1 (2017) |
Increasing the efficiency of the catalytic converter |
(Rus)
|
|
Solomin V.A., Shabanov A.V., Shabanov A.A., Kiliushnik V.M., Mladenskiy A.V.
|
| Vol 16, No 4 (2022) |
Increasing the efficiency of the lubrication system of a modern internal combustion diesel engine |
(Rus)
|
|
Khannanov M.D., Alimgulov E.R., Fardeev L.I., Kulikov A.S., Gumerov I.F., Gubaidullin R.R., Mukanov G.Z., Doikin A.A.
|
| Vol 8, No 3-4 (2014) |
Increasing the range of passive radar systems, operating on signals of telecommunications sources |
(Rus)
|
|
Rogozhnikov E.V., Velikanova E.P., Shipelgut A.A., Voroshilin E.P.
|
| Vol 7, No 1-4 (2013) |
Increasing the reliability of technological equipment of waste processing plants |
(Rus)
|
|
Gonopolskiy A.M., Murashov V.E., Fedorova A.V.
|
| Vol 17, No 3 (2023) |
Increasing the wear resistance of the ICE’s valves with the laser cladding method |
(Rus)
|
|
Zavitkov A.V., Loktev A.S., Lyukhter A.B.
|
| Vol 7, No 1-3 (2013) |
Incremental geometrically nonlinear axisymmetric finite element model of forming process of thick sheet metals under the action of rigid tools |
(Rus)
|
|
Sukhomlinov L.G., Mikhaylova V.L.
|
| Vol 8, No 2-5 (2014) |
Independent work of students in the discipline "methods of fractal analysis" |
(Rus)
|
|
Bavykin O.B., Rusakova S.M.
|
| Vol 7, No 1-5 (2013) |
Indices of financial and business activity of an automobile enterprise |
(Rus)
|
|
Larina E.V.
|
| Vol 6, No 1 (2012) |
INDIVIDUAL STYLE OF PEDAGOGICAL ACTIVITY DURING TRAINING OF A COMPETITIVE ENGINEERING |
(Rus)
|
|
Krutina E.V.
|
| Vol 8, No 3-3 (2014) |
Induction of carotenogenesis in the yeast of Phaffia rhodozyma strain Y2228 in formation of singlet oxygen in culture medium under the action of hydrogen peroxide |
(Rus)
|
|
Melnikova E.V., German L.S., Kramm E.A.
|
| Vol 9, No 3-5 (2015) |
Industrial espionage and business intelligence as opportunities of implementation and development of innovations in industry |
(Rus)
|
|
Ketkina E.A., Burlakov V.V.
|
| Vol 8, No 1-2 (2014) |
Industrial experience of industrial development of sheet parts of the nomenclature of “Utes” OJSC in individual production |
(Rus)
|
|
Kultuchkin M.I., Kokorin V.N., Polyakov S.Y.
|
| Vol 9, No 4-5 (2015) |
Industrial policy and economic interests of the metropolis entities |
(Rus)
|
|
Smetanov A.U., Veremeenko S.A.
|
| Vol 2, No 1 (2008) |
Industrial policy: formation and development directions |
(Rus)
|
|
Ilyin S.N., Ilyin A.S.
|
| Vol 5, No 1 (2011) |
Influence of a leading mode wheel rolling on formation of basic surface of movement |
(Rus)
|
|
Sergeev A.I.
|
| Vol 3, No 2 (2009) |
Influence of a method of gear treatment on durability on a bend of teeth of cylindrical wheels of automobiles and tractors |
(Rus)
|
|
Vinogradov V.M., Cherepakhin A.A.
|
| Vol 1, No 2 (2007) |
Influence of Alloying and Structural Condition of Thermionic Emission and Heat Resistance of Niobium |
(Rus)
|
|
Arzamasov V.B., Smirnova E.E., Stroyev A.A., Polunov I.L.
|
| Vol 16, No 3 (2022) |
Influence of an impeller inlet diameter on operation of a high-speed submersible electric pump at the high flow rate modes |
(Rus)
|
|
Gorbatov D.A., Zharkovsky A.A., Adrianov A.V.
|
| Vol 3, No 2 (2009) |
Influence of Axial Adjustment Force in Universal Ball Joint on vibrational load of front-wheel drive vehicle power unit |
|
|
Prokopyev M.V., Naymushin E.Y.
|
| Vol 2, No 1 (2008) |
Influence of Axisymmetric Initial Imperfections of a Spherical Shell on its Critical Load |
(Rus)
|
|
Grigolyuk E.I., Lopanitsyn E.A.
|
| Vol 8, No 2-2 (2014) |
Influence of carbide phase distribution on deterioration of composite coating WOKA PTA-6040 after plasma powder surfacing |
(Rus)
|
|
Parkin A.A., Zhatkin S.S., Minakov E.A.
|
| Vol 8, No 4-2 (2014) |
Influence of change of speed of deformation on nature of hardening of material |
(Rus)
|
|
Kiselyov D.O., Tipalin S.A., Shpunkin N.F., Tipalina A.V.
|
| Vol 1, No 2 (2007) |
Influence of chromium on the properties of molded steel for hot deformation |
(Rus)
|
|
Nitkin N.M., Zuev V.M.
|
| Vol 4, No 1 (2010) |
Influence of Clutch Damper Springs Preload on Dynamic Load of Vehicle Transmission |
(Rus)
|
|
Solomatin N.S., Simonov D.V., Zotov E.M.
|
| Vol 16, No 2 (2022) |
Influence of cooling of high temperature vane systems on efficiency gas turbine units regarding working substance specific heat capacity dependence on temperature |
(Rus)
|
|
Basati Panah M., Rassokhin V.A., Barskov V.V., Okunev E.I., Laptev M.A., Kortikov N.N., Chu V., Gong B.
|
| Vol 7, No 2-1 (2013) |
Influence of friction in joints on the performance of tensioning device of continuous track |
(Rus)
|
|
Bulbutenko S.S., Fedotkin R.S., Ovcharenko A.S., Beynenson V.D.
|
| Vol 7, No 2-1 (2013) |
Influence of geometry and design of a roller-type dynamometer on the accuracy of cornering characteristics of automobile tires |
(Rus)
|
|
Kondrashov V.N., Bernadskiy V.V.
|
| Vol 8, No 2-4 (2014) |
Influence of gradient tensor shape in geometrically nonlinear endochronic theory of creep |
(Rus)
|
|
Kadashevich Y.I., Pomytkin S.P.
|
| Vol 16, No 2 (2022) |
Influence of heat-protective coatings on the temperature state of tractor diesel pistons |
(Rus)
|
|
Belov V.P., Apelinsky D.V., Bezhenar V.N.
|
| Vol 9, No 4-5 (2015) |
Influence of Human Resources Development to address the problems of import substitution |
(Rus)
|
|
Krekova M.M., Samohalova I.O.
|
| Vol 8, No 2-2 (2014) |
Influence of modes of diamond grinding on cutting forces during machining of structural ceramics |
(Rus)
|
|
Alexeev S.V.
|
| Vol 4, No 1 (2010) |
Influence of Occilations in Sectional Shape of Non-rigid Parts Quill Cylinder Type on the Cutting Force in the Process of Combined Machining and Surface Plastic Deformation |
(Rus)
|
|
Maximov Y.V., Ankin A.V., Vetrova E.A.
|
| Vol 2, No 2 (2008) |
Influence of Operation and Assembly Interaction of Pipe Valves on Their Quality Rating |
(Rus)
|
|
Semenov A.N., Naumova S.A.
|
| Vol 7, No 1-1 (2013) |
Influence of parameters and conditions of rolling of elastic wheels on their power and kinematic characteristics |
(Rus)
|
|
Balabina T.A., Balovnev N.P., Ivanov V.A., Chepurnoy S.I.
|
| Vol 8, No 4-4 (2014) |
Influence of parameters of geometrically nonlinear endochronic theory of inelasticity on description of stress relaxation process |
(Rus)
|
|
Kadashevich Y.I., Pomytkin S.P., Pomytkina T.B.
|
| Vol 7, No 1-2 (2013) |
Influence of parameters of the plasma arc and the workpiece material on the structure and properties of Stellite 190 W built-up alloy |
(Rus)
|
|
Zhatkin S.S., Parkin A.A., Minakov E.A.
|
| Vol 7, No 2-2 (2013) |
Influence of phase composition on the electro-thermal-physical properties of powder tungsten alloys for high-load electric contacts |
(Rus)
|
|
Arzamasov V.B., Antipenko V.S., Stroev A.A., Galkin K.V.
|
| Vol 5, No 2 (2011) |
Influence of Population Settlement Pattern of Russian Federation on the Regional Economics of the Country |
(Rus)
|
|
Kozlova A.A.
|
| Vol 4, No 1-4 (2014) |
Influence of pressure and temperature on thermal conductivity of limestone |
(Rus)
|
|
Ramazanova A.E., Magdiev A.M.
|
| Vol 7, No 2-2 (2013) |
Influence of processing factors on the structure and properties of carbon steel powder obtained by sintering and hardening of electropulse nanoparticles |
(Rus)
|
|
Panov V.S., Skorikov R.A., Eremeeva Z.V., Nitkin N.M., Sharipzjanova G.H., Zherdickaja N.N., Ivanov S.A.
|
| Vol 8, No 1-2 (2014) |
Influence of reinforcing on structure, mechanical and technological properties of composite materials |
(Rus)
|
|
Pechnikov A.A., Toleshuli A., Meshcheryakov E.G.
|
| Vol 5, No 2 (2011) |
Influence of Residual Stresses on Product Quality on Cold Forming of Sheet Workpieces |
(Rus)
|
|
Kolikov A.P., Lyutsau A.V., Lisunets N.L., Gladkov V.I., Shpunkin N.F.
|
| Vol 8, No 3-3 (2014) |
Influence of salinity on bioconcentration and genotoxicityof heavy metals for Asteria srubens L. sea stars |
(Rus)
|
|
Poromov A.A., Peretykin A.A., Smurov A.V.
|
| Vol 4, No 2 (2010) |
Influence of social factors on the share of the market of the russian cars |
(Rus)
|
|
Arkatova N.A.
|
| Vol 4, No 2 (2010) |
Influence of steering drive and axle layout of all-wheel drive vehicle on soil impact |
(Rus)
|
|
Korkin S.N., Pereladov A.S.
|
| Vol 17, No 2 (2023) |
Influence of switching sequences on the neutral point voltage balance in a three-level voltage source invertor |
(Rus)
|
|
Shishkov A.N., Dudkin M.M., Le V.
|
| Vol 2, No 1 (2008) |
Influence of the Aggregate Demand on the Investment Formation through Internal Resources of Economic Units |
(Rus)
|
|
Katanaev N.T., Panevina E.M., Simutina M.N.
|
| Vol 17, No 4 (2023) |
Influence of the centrifugal pump impeller vanes parameters on its energy performance at operating with high-viscosity liquid |
(Rus)
|
|
Cheremushkin V.A., Lomakin V.O.
|
| Vol 15, No 2 (2021) |
Influence of the cross-sectional shape and length of the compressible sections on the characteristics of a linear peristaltic pump |
(Rus)
|
|
Grishin A.I.
|
| Vol 4, No 1 (2010) |
Influence of the Distribution of Power Flows on the Vehicle Traction |
(Rus)
|
|
Vyuhin A.V., Bazhenov E.E., Buynachev S.K.
|
| Vol 12, No 2 (2018) |
Influence of the elements of the spatial bearing system of the vehicle of increased cross-country ability of the “buggy” class on the parameters of its stress-strain state |
(Rus)
|
|
Bazhenov E.E., Bujnachev S.K., Kustovskij A.N.
|
| Vol 7, No 2-1 (2013) |
Influence of the geometry of plate heat exchanger inlet manifold on the hydraulic unevenness of heat carrier flow |
(Rus)
|
|
Merkulov V.I., Sugonyaev M.V.
|
| Vol 7, No 1-5 (2013) |
Influence of the Human Development Index to the socio-economic policy |
(Rus)
|
|
Zyulina V.V.
|
| Vol 6, No 1 (2012) |
INFLUENCE OF THE METHOD OF TOOTH FORMING AND FORMS OF TOLERANCE FOR FINISHING ON THE ACCURACY OF MACHINED GEARS |
(Rus)
|
|
Vinogradov V.M., Shvychkov D.V.
|
| Vol 6, No 2-2 (2012) |
Influence of the mode parameters on the technological characteristics of the injector hole broaching operation |
(Rus)
|
|
Belov I.I., Gruzdev A.A., Saushkin B.P.
|
| Vol 5, No 2 (2011) |
Influence of the Surface Energy of Metallic Specimens on Strength of Adhesive Joints |
(Rus)
|
|
Zinina I.I., Pimanov M.V.
|
| Vol 8, No 1-2 (2014) |
Influence of the type of wide nomenclature of a machine-building production on the size of unproductive losses of time in the technological and production processes of manufacturing |
(Rus)
|
|
Ryabov A.N.
|
| Vol 7, No 2-1 (2013) |
Influence of tolerances of main dimensions of flow part of a centrifugal pump on spread of its basic parameters |
(Rus)
|
|
Sheipak A.A., Chivileva M.S., Sheipak I.A.
|
| Vol 8, No 2-1 (2014) |
Influence of torque distribution between axles on off-road capability of KamAZ-4350, 5350 and 6350 |
(Rus)
|
|
Komarov V.A., Ostretsov A.V., Kondrashov V.N.
|
| Vol 8, No 2-3 (2014) |
Influence of traffic emission on distribution of heavy metals and benzo(α)pyrene in water of recreational areas |
(Rus)
|
|
Sorokin A.V., Sotnikova E.V.
|
| Vol 5, No 2 (2011) |
Influence of Uneven Workpiece Allowance on the Output Parameters of Technological Equipment |
(Rus)
|
|
Ivannikov S.N., Shandov M.M.
|
| Vol 8, No 3-3 (2014) |
Influence of velocity on separation efficiency of drops under partial condensation of vapor on tube bundle |
(Rus)
|
|
Zhikharev A.S., Mantrova Y.S.
|
| 901 - 1050 of 2524 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 > >> |
