| Issue |
Section |
Title |
File |
| Vol 52, No 1 (2016) |
Acoustic Methods |
Ultrasonic testing on a singly reflected beam using sparse antenna arrays and 3D echo-signal processing |
|
| Vol 52, No 1 (2016) |
Acoustic Methods |
A correction factor for the amplitude adjustment for the pulse echo ultrasonic inspection of components with curved surfaces |
|
| Vol 52, No 1 (2016) |
Acoustic Methods |
Strength tests of samples made from carbon plastics with various monolayer packings |
|
| Vol 52, No 1 (2016) |
Eddy-Current Methods |
Flaw detection of alloys using the eddy-current method |
|
| Vol 52, No 1 (2016) |
General Problems of Nondestructive Testing |
The classification of flaws of metal materials synthesized by the selective laser melting method and the capabilities of nondestructive testing methods for their detection |
|
| Vol 52, No 1 (2016) |
General Problems of Nondestructive Testing |
Contribution to the issue of evaluating the compressive strength of concrete exposed to high temperatures using the Schmidt rebound hammer |
|
| Vol 52, No 2 (2016) |
Acoustic Methods |
An acoustic method for estimating the thermal-pulsation-induced damage in austenitic steel |
|
| Vol 52, No 2 (2016) |
Acoustic Methods |
Two approaches to the solution of problems of ultrasonic flaw metering: Analysis of a high-quality image of reflectors and correlation analysis of measured echo signals |
|
| Vol 52, No 2 (2016) |
Acoustic Methods |
Factors that affect the excitation effectiveness of torsional waves during waveguide inspection of pipes |
|
| Vol 52, No 2 (2016) |
Eddy-Current Methods |
An initial-boundary value problem of structurescopy of a nonferromagnetic metal solid with foreign dielectric inclusions using the residual field of an instantaneously cut-off extraneous current |
|
| Vol 52, No 2 (2016) |
Eddy-Current Methods |
The probabilistic characteristics of estimation of the residual strength and operation lifetime of steel wire rope based on the results of non-destructive testing |
|
| Vol 52, No 2 (2016) |
Integrated Methods |
Integrated quality control of the rotor discs of gas turbines of gas-compressor units by eddy-current and dye penetrant nondestructive testing |
|
| Vol 52, No 2 (2016) |
Integrated Methods |
An instrument for simultaneous visual and thermal testing of microelectronic devices |
|
| Vol 52, No 3 (2016) |
Acoustic Methods |
Ultrasonic location of inner crack defects in a compound elastic cylinder using an artificial neural-network apparatus |
|
| Vol 52, No 3 (2016) |
Acoustic Methods |
Best wavelet basis for wavelet transforms in acoustic emission signals of concrete damage process |
|
| Vol 52, No 3 (2016) |
Leak Hunting |
On locating a vacuum leak with the indicator fiber particle method |
|
| Vol 52, No 3 (2016) |
Radiography |
A method for increasing the objectivity of the interpretation of weld radiographs |
|
| Vol 52, No 3 (2016) |
Radiography |
Hardware for new methods of radiation control |
|
| Vol 52, No 3 (2016) |
Magnetic and Electromagnetic Methods |
A comparative analysis of the active and residual magnetization methods in the nondestructive testing of rails |
|
| Vol 52, No 3 (2016) |
Magnetic and Electromagnetic Methods |
An analytical magnetization model of a layered medium by point poles |
|
| Vol 52, No 3 (2016) |
Magnetic and Electromagnetic Methods |
Computer-assisted methods for finding pulsed magnetic-field distributions near current-conducting objects |
|
| Vol 52, No 3 (2016) |
Magnetic and Electromagnetic Methods |
Defects detection of gas pipeline near the welds based on self quotient image and discrete cosine transform |
|
| Vol 52, No 4 (2016) |
Acoustic Methods |
Detecting transverse material boundaries in multilayer anthropogenic structures |
|
| Vol 52, No 4 (2016) |
Acoustic Methods |
Generating short pulses at the output of an emission–reception system when the emitter is excited with pulses with a special shape |
|
| Vol 52, No 4 (2016) |
Acoustic Methods |
A local method for loading a tested object during acoustic-emission diagnostics |
|
| Vol 52, No 4 (2016) |
Thermal Methods |
Ultrasonic infrared thermography in non-destructive testing: A review |
|
| Vol 52, No 4 (2016) |
Magnetic Methods |
The detection of real defects in ferromagnetic objects using a magnetic-field imaging film |
|
| Vol 52, No 4 (2016) |
Magnetic Methods |
Eddy currents and conducting and magnetizable spherical inclusions fields in a nonmagnetic medium |
|
| Vol 52, No 4 (2016) |
X-Ray Methods |
The current state and prospects of X-ray computational tomography |
|
| Vol 52, No 4 (2016) |
X-Ray Methods |
Optimization of energy window for gamma densitometer based backscatter method in oil industry |
|
| Vol 52, No 5 (2016) |
Acoustic Methods |
Adaptive instruments for ultrasonic nondestructive testing of large objects with complex structures |
|
| Vol 52, No 5 (2016) |
Acoustic Methods |
Acoustic-emission location of flaws during multiple-run welding of contours with complex shapes |
|
| Vol 52, No 5 (2016) |
Electromagnetic Methods |
Investigation of the amplification of an electromagnetic field at the end wall of a conducting thin-wall body during its interaction with an alternating magnetic field |
|
| Vol 52, No 5 (2016) |
Electromagnetic Methods |
Measuring the depth of conducting coatings with gap and substrate-conductivity detuning |
|
| Vol 52, No 5 (2016) |
Vibration Diagnostics |
Testing a pump unit by identification measurements of vibration signals |
|
| Vol 52, No 5 (2016) |
Optical Methods |
Electro-optical monitoring of the chromatic error of the polymeric coating of a galvanized strip |
|
| Vol 52, No 5 (2016) |
X-Ray Methods |
Testing loaded samples using X-ray computed tomography |
|
| Vol 52, No 6 (2016) |
Acoustic Methods |
A laser ultrasonic technique for studying the properties of products manufactured by additive technologies |
|
| Vol 52, No 6 (2016) |
Acoustic Methods |
Improving signal-to-noise ratio in ultrasonic testing |
|
| Vol 52, No 6 (2016) |
Acoustic Methods |
Experimental study of directional characteristics of a pulsed laser thermoacoustic radiator |
|
| Vol 52, No 6 (2016) |
Acoustic Methods |
Revealing cracks in polymer-composite parts and in multilayered glued constructions by a low-frequency acoustic method |
|
| Vol 52, No 6 (2016) |
Acoustic Methods |
Determining the probability of detecting flaws in weld joints by phased-array ultrasonic testing |
|
| Vol 52, No 6 (2016) |
Acoustic Methods |
Choosing parameters of space-time signal processing in ultrasonic structuroscopy of cast-iron molds subjected to thermal cycling |
|
| Vol 52, No 6 (2016) |
Acoustic-Emission Methods |
Discovering data flow discords for enhancing noise immunity of acoustic-emission testing |
|
| Vol 52, No 6 (2016) |
Magnetic Methods |
On controlling stresses in a complexly loaded steel construction by magnetoelastic demagnetization |
|
| Vol 52, No 7 (2016) |
Acoustic Methods |
Methodological peculiarities of using SH- and Lamb waves when assessing the anisotropy of properties of flats |
|
| Vol 52, No 7 (2016) |
Acoustic Methods |
An electromagnetic-acoustic method for studying stress-strain states of rails |
|
| Vol 52, No 7 (2016) |
Acoustic Methods |
On a defect identification method based on monitoring the structure and peculiarities of surface wave fields |
|
| Vol 52, No 7 (2016) |
Acoustic Methods |
Peculiarities of ultrasonic pulsed immersion testing of blanks of railway axles |
|
| Vol 52, No 7 (2016) |
Acoustic Methods |
On the principles of optimizing the technologies of acoustic-emission strength control of industrial objects |
|
| Vol 52, No 7 (2016) |
Magnetic Methods |
Exact solution of one problem of magnetostatics in bipolar coordinates (continued) |
|
| Vol 52, No 7 (2016) |
Magnetic Methods |
Studying the dependence of flaw-induced magnetic field on the parameters of magnetizing device |
|
| Vol 52, No 7 (2016) |
Optical Methods |
A dedicated optical system for the quality inspection of cylindrical surfaces |
|
| Vol 52, No 8 (2016) |
Acoustic Methods |
On some paradoxes in the analysis of pulsed operation mode of acoustic transducers by the method of integral transformations |
|
| Vol 52, No 8 (2016) |
Acoustic Methods |
Reconstructing reflector images in ultrasonic testing of isotropic inhomogeneous media |
|
| Vol 52, No 8 (2016) |
Acoustic Methods |
Acoustic-emission evaluation of the process of destruction of a composite material under tensile, compression, and cyclic loads |
|
| Vol 52, No 8 (2016) |
Thermal Methods |
Revealing surface microcracks in metal articles by excitation of high-frequency eddy currents with subsequent infrared-camera imaging |
|
| Vol 52, No 8 (2016) |
Electric Methods |
Effect of cyclic freezing–thawing on the parameters of electric response to elastic shock excitation of reinforced concrete |
|
| Vol 52, No 8 (2016) |
Electric Methods |
Nondestructive testing for flaws in the insulation of winding wires |
|
| Vol 52, No 8 (2016) |
General Questions of Nondestructive Testing |
Remote testing of high-voltage insulators |
|
| Vol 52, No 9 (2016) |
X-Ray Methods |
State-of-the art and development prospects of digital radiography systems for nondestructive testing, evaluation, and inspection of objects: a review |
|
| Vol 52, No 9 (2016) |
Acoustic Methods |
Factors affecting attenuation of torsional waves in pipes loaded on contact viscoelastic media |
|
| Vol 52, No 9 (2016) |
X-Ray Methods |
Digital X-ray 3D-microtomograph for testing materials and components used in electronics |
|
| Vol 52, No 9 (2016) |
Electromagnetic Methods |
Nondestructive testing of the quality of winding impregnation in electric machines |
|
| Vol 52, No 9 (2016) |
Electromagnetic Methods |
Studying the possibilities of georadar tomography in searching for air cavities in engineering constructions |
|
| Vol 52, No 9 (2016) |
Thermal Methods |
Determining the lateral size of subsurface defects during active thermal nondestructive testing |
|
| Vol 52, No 9 (2016) |
General Problems of Nondestructive Testing |
Using nondestructive testing methods for in-production quality control of additive manufactured parts |
|
| Vol 52, No 9 (2016) |
Erratum |
Erratum to: “Thermal nondestructive testing of thermal-barrier coatings of turbine buckets” |
|
| Vol 52, No 10 (2016) |
Acoustic Methods |
Development of passive ultrasonic tomography techniques |
|
| Vol 52, No 10 (2016) |
Acoustic Methods |
A facility for measuring the thickness of thin metal films |
|
| Vol 52, No 10 (2016) |
Acoustic Methods |
Optimization of the Cascade Feed Forward Back Propagation network for defect classification in ultrasonic images |
|
| Vol 52, No 10 (2016) |
X-Ray Methods |
Comparative analysis of techniques for revealing cracks in noisy X-ray tomography and introscopy images |
|
| Vol 52, No 10 (2016) |
X-Ray Methods |
Reconstructing the melting channel shape in electron-beam welding from the parameters of penetrating X-ray radiation. Part I. Posing inverse geometrical problem |
|
| Vol 52, No 10 (2016) |
Magnetic Methods |
Using magnetic testing to optimize the technology of manufacturing stain-proof austenitic steels |
|
| Vol 52, No 10 (2016) |
Thermal Methods |
A LED-based thermal detector of hidden corrosion flaws |
|
| Vol 52, No 10 (2016) |
Radiowave Methods |
Determining the position of hydrate blocks in gas pipelines by a radiowave method |
|
| Vol 52, No 10 (2016) |
General Problems of Nondestructive Testing |
Applying nondestructive testing to quality control of additive manufactured parts |
|
| Vol 52, No 10 (2016) |
General Problems of Nondestructive Testing |
Ultrasonic and eddy-current study of plastic deformation in austenitic-steel welds |
|
| Vol 52, No 11 (2016) |
Electromagnetic Methods |
Local determination of the field of induced magnetic anisotropy and the level of residual mechanical stresses in tensile-deformed bodies made of low-carbon steels |
|
| Vol 52, No 11 (2016) |
Electromagnetic Methods |
Studying magnetic stray field at the surface of elastostrained extensive object |
|
| Vol 52, No 11 (2016) |
Electromagnetic Methods |
Eddy-current control of the phase composition and hardness of metastable austenitic steel after different regimes of nanostructuring frictional treatment |
|
| Vol 52, No 11 (2016) |
Electromagnetic Methods |
Initial-boundary value problem of electromagnetic testing of a flawed ferromagnetic conductor by the residual field of an instantaneously cut-off current |
|
| Vol 52, No 11 (2016) |
Electromagnetic Methods |
Computer-aided inspection center for magnetoimpedance spectroscopy |
|
| Vol 52, No 11 (2016) |
Acoustic Methods |
Noncontact excitation of sound in metals by a video pulse of electric field |
|
| Vol 52, No 11 (2016) |
Acoustic Methods |
Effect of traffic volume on acoustic structural noises in rails |
|
| Vol 52, No 11 (2016) |
Electric Methods |
Using Kelvin probe force microscopy for controlling the phase composition of austenite–martensite chromium–nickel steel |
|
| Vol 52, No 12 (2016) |
Acoustic Methods |
Excitation of a circular-aperture transducer with an echo pulse reflected from a spherical surface |
|
| Vol 52, No 12 (2016) |
Acoustic Methods |
Experimental research into possibilities and peculiarities of ultrasonic testing of additive manufactured parts |
|
| Vol 52, No 12 (2016) |
Acoustic Methods |
Assessing the results of ultrasonic testing of additive manufactured parts with alternative methods |
|
| Vol 52, No 12 (2016) |
Acoustic Methods |
Magnetostriction electromagnetic–acoustic excitation of ultrasonic waves without a bias field |
|
| Vol 52, No 12 (2016) |
Acoustic Methods |
Effect of processing and microstructure on ultrasonic response of aerospace alloys: An overview |
|
| Vol 52, No 12 (2016) |
Magnetic Methods |
Evaluating the level of residual stresses in anisotropic electric steel |
|
| Vol 52, No 12 (2016) |
Magnetic Methods |
Magnetic testing of hardness of cast railcar steel 32Х06Л after quenching and high-temperature tempering |
|
| Vol 52, No 12 (2016) |
Magnetic Methods |
Measuring saturation magnetization in a local sample area |
|
| Vol 52, No 12 (2016) |
Magnetic Methods |
Magnetic flux distribution in a locally magnetized ferromagnetic object |
|
| Vol 52, No 12 (2016) |
Magnetic Methods |
Solving the inverse problem of magnetostatics on determining the radius and permeability of an infinite cylinder |
|
| Vol 52, No 12 (2016) |
Magnetic Methods |
Effect of transitions of domain boundaries in plastically deformed steels on their residual magnetization |
|
| Vol 52, No 12 (2016) |
Thermal Methods |
Estimating the humidity of wood by terahertz infrared thermography |
|
| Vol 53, No 1 (2017) |
Acoustic Methods |
Generalized coefficients for measuring mechanical stresses in carbon and low-alloyed steels by the acoustoelasticity method |
|
| Vol 53, No 1 (2017) |
Acoustic Methods |
Allowing for inhomogeneous anisotropy of a welded joint when reconstructing reflector images from echo signals received by an ultrasonic antenna array |
|
| Vol 53, No 1 (2017) |
Acoustic Methods |
Using antenna arrays for reference-free measurement of speed of ultrasound and thickness of concrete articles |
|
| Vol 53, No 1 (2017) |
Acoustic Methods |
Advanced-reliability acoustic-emission transducers |
|
| Vol 53, No 1 (2017) |
Acoustic Methods |
Acoustic investigations of the steel samples deformation during the tensile |
|
| Vol 53, No 1 (2017) |
Electromagnetic Methods |
Monitoring stressed state of pipelines by magnetic parameters of metal |
|
| Vol 53, No 1 (2017) |
Optical Methods |
On the effect of the shape of a flaw on its detectability against noise background |
|
| Vol 53, No 1 (2017) |
Radiation Methods |
Estimating the probability of flaw detection by modeling processes of image generation and interpretation |
|
| Vol 53, No 1 (2017) |
Radiation Methods |
The Monte Carlo study of techniques for determining bremsstrahlung focal spots |
|
| Vol 53, No 2 (2017) |
Acoustic Methods |
Estimating the strength of welded hull elements of a submersible based on the micromechanical model of temporal dependences of acoustic-emission parameters |
|
| Vol 53, No 2 (2017) |
Acoustic Methods |
Analysis of errors in location of flaws in multipass welds using different clustering methods |
|
| Vol 53, No 2 (2017) |
Electrical Methods |
Development prospects for nondestructive testing of heterogeneous nonmetallic materials by the parameters of electrical response to a shock action |
|
| Vol 53, No 2 (2017) |
Electrical Methods |
An automated system for measuring the impedance of polymer films |
|
| Vol 53, No 2 (2017) |
Electrical Methods |
Evaluating parameters of semiconductors from their microwave reflection spectra in a wide temperature range |
|
| Vol 53, No 2 (2017) |
Magnetic Methods |
Evaluating the structure of a ferromagnetic material based on magnetic-field strength between the poles of an attached two-pole magnetizing device |
|
| Vol 53, No 2 (2017) |
Radiation Methods |
Estimating the efficiency of two algorithms for segmentation of digital radiation images of test objects |
|
| Vol 53, No 2 (2017) |
Thermal Methods |
Improved active contour modelling for isolating different hues in infrared thermograms |
|
| Vol 53, No 2 (2017) |
Ultrasonic Methods |
The effect of water-cement ratio on acousto-ultrasonic characteristics in mortar |
|
| Vol 53, No 2 (2017) |
Ultrasonic Methods |
Water content and temperature effect on ultrasonic pulse velocity of concrete |
|
| Vol 53, No 3 (2017) |
Acoustic Methods |
Input electrical impedance and efficiency of ultrasonic transducers with phased excitation of two piezoelectric plates |
|
| Vol 53, No 3 (2017) |
Acoustic Methods |
Ultrasonic control of welded joints in a Du800-type pipeline. Part I: Restoring reflector images by digital focusing with an antenna |
|
| Vol 53, No 3 (2017) |
Acoustic Methods |
Estimation of the sensitivity of acoustic reflectometry to flaws in heat-exchange pipes |
|
| Vol 53, No 3 (2017) |
Magnetic Methods |
Magnetoelastic phenomena in residually magnetized cobalt steel |
|
| Vol 53, No 3 (2017) |
Magnetic Methods |
System based on a ZVA-67 vector network analyzer for measuring high-frequency parameters of magnetic film structures |
|
| Vol 53, No 3 (2017) |
Electrical Methods |
On a criterion for testing the stress-strain state of dielectric materials |
|
| Vol 53, No 3 (2017) |
Electrical Methods |
A technique for testing and repairing the insulation of enameled wires |
|
| Vol 53, No 3 (2017) |
X-Ray Methods |
0.2BPM64-200 microfocus X-ray tube for projection radiography |
|
| Vol 53, No 3 (2017) |
Capillary Methods |
Estimating the depth of surface flaws by penetrant testing |
|
| Vol 53, No 3 (2017) |
Optical Methods |
Detection and analysis of micro cracks in low modulus materials with thermal loading using laser speckle interferometry |
|
| Vol 53, No 4 (2017) |
Acoustic Methods |
Theoretical Aspects of Applying Lamb Waves in Nondestructive Testing of Anisotropic Media |
|
| Vol 53, No 4 (2017) |
Acoustic Methods |
Directional Characteristics of a Laser Pulsed Thermoacoustic Emitter in Nonmagnetic Metals |
|
| Vol 53, No 4 (2017) |
Acoustic Methods |
Localization of Reflectors in Plates by Ultrasonic Testing with Lamb Waves |
|
| Vol 53, No 4 (2017) |
Acoustic Methods |
On Using an Acoustic Antenna Array for Testing Thermal Damages in Austenitic Steel by the Spectral Method |
|
| Vol 53, No 4 (2017) |
Acoustic Methods |
On the Allowance for Direct Piezoelectric Effect when Studying the Pulsed Operation Mode of a Piezoelectric Emitter by d’Alambert’s Method |
|
| Vol 53, No 4 (2017) |
Acoustic Methods |
Examining the Experience of Revealing Delayed Deformation Corrosion Cracking |
|
| Vol 53, No 4 (2017) |
Acoustic Methods |
Possibilities for Increasing the Efficiency of Contactless Emitters of Acoustic Waves |
|
| Vol 53, No 4 (2017) |
Acoustic Methods |
Finite Element Modelling of Lamb Waves Propagation in 3D Plates and Brass Tubes for Damage Detection |
|
| Vol 53, No 4 (2017) |
Magnetic Methods |
Magnetic Testing of Articles Made of Nanocrystalline Alloys with a Mechatronic Module |
|
| Vol 53, No 5 (2017) |
Acoustic Methods |
The multiple shadow method applied to testing cylindrical objects with Rayleigh waves |
|
| Vol 53, No 5 (2017) |
Acoustic Methods |
Ultrasonic control of welded joints in a Du800-type pipeline. Part II: Improving image quality and comparison with X-ray testing results |
|
| Vol 53, No 5 (2017) |
Acoustic Methods |
Comparative analysis of different methods of acoustic beam angle measurement and calculation of directivity patterns for angle piezoelectric transducers |
|
| Vol 53, No 5 (2017) |
Acoustic Methods |
Using a probabilistic model to estimate the reliability of locating acoustic emission sources |
|
| Vol 53, No 5 (2017) |
Acoustic Methods |
Acoustic-emission quality control of plastically deformed blanks |
|
| Vol 53, No 5 (2017) |
Electrical Methods |
Theoretical basics for inspection of conducting coatings in aircraft fuel tanks |
|
| Vol 53, No 5 (2017) |
X-Ray Methods |
Implementing a back-projection tomographic reconstruction algorithm using a fan-shaped beam |
|
| Vol 53, No 5 (2017) |
Leak Hunting |
Prospects of using a sensor operating on surface acoustic waves for leak hunting |
|
| Vol 53, No 6 (2017) |
Acoustic Methods |
Using coherence factor to improve the quality of reflector images in ultrasonic testing |
|
| Vol 53, No 6 (2017) |
Acoustic Methods |
Detecting acoustic-emission signals with fiber-optic interference transducers |
|
| Vol 53, No 6 (2017) |
Acoustic Methods |
Studying the failure of a CFRP sample under static loading by the acoustic-emission and fractography methods |
|
| Vol 53, No 6 (2017) |
Acoustic Methods |
Acoustic-emission inspection of flaws during laser bonding of articles made of VT20 titanium alloy |
|
| Vol 53, No 6 (2017) |
Acoustic Methods |
Forecasting the strength of concrete during its hardening by the acoustic-emission method |
|
| Vol 53, No 6 (2017) |
Acoustic Methods |
Stray field of a wedge placed in an external inhomogeneous magnetic field |
|
| Vol 53, No 6 (2017) |
Acoustic Methods |
Active thermal testing of hyperthermoconductive panels |
|
| Vol 53, No 6 (2017) |
General Questions of Nondestructive Testing |
Developing an integrated technique to evaluate crack formation in reinforced concrete under uniaxial compression |
|
| Vol 53, No 6 (2017) |
General Questions of Nondestructive Testing |
A nondestructive method and a tool for evaluating rigidity of porous sheet materials |
|
| Vol 53, No 7 (2017) |
Acoustic Methods |
Scattering of plane elastic waves on a microrough interface between solid media |
|
| Vol 53, No 7 (2017) |
Acoustic Methods |
Frequency dependences of higher-order constants of piezoelectric ceramics |
|
| Vol 53, No 7 (2017) |
Electromagnetic Methods |
Multipurpose software-hardware systems for active electromagnetic testing as a trend |
|
| Vol 53, No 7 (2017) |
Electromagnetic Methods |
On the well-posedness of direct and inverse problems of magnetostatics. Part I |
|
| Vol 53, No 7 (2017) |
Electromagnetic Methods |
Using magnetoresistive films with unidirectional anisotropy to register elastic deformations |
|
| Vol 53, No 7 (2017) |
Electromagnetic Methods |
A nondestructive method for express testing of condensed media in ecological monitoring |
|
| Vol 53, No 7 (2017) |
Thermal Methods |
Detecting low-energy impact damages in carbon-carbon composites by ultrasonic infrared thermography |
|
| Vol 53, No 7 (2017) |
General Questions of Nondestructive Testing |
Main provisions of GOST (Intergovernmental Standard) 33514–2015 “Railway-purpose production. Verification of nondestructive testing procedures” |
|
| Vol 53, No 8 (2017) |
Acoustic Methods |
Calculating the energy transmission factor for a couplant layer with nonuniform thickness |
|
| Vol 53, No 8 (2017) |
Acoustic Methods |
Connection between the properties of 40kh-steel bar stock and the speed of bulk and rayleigh waves |
|
| Vol 53, No 8 (2017) |
X-Ray Methods |
Identification of materials in X-Ray inspections of objects by the dual-energy method |
|
| Vol 53, No 8 (2017) |
Electromagnetic Methods |
An eddy-current gauge for measuring the wall thickness of light-alloy drill pipes |
|
| Vol 53, No 9 (2017) |
Acoustic Methods |
Theoretical aspects of applying love and SH-waves to nondestructive testing of stratified media |
|
| Vol 53, No 9 (2017) |
Acoustic Methods |
Determining the distance between antenna arrays and the speed of longitudinal waves in a test object when reconstructing the profile image of the bottom of a weld in ultrasonic testing |
|
| Vol 53, No 9 (2017) |
Acoustic Methods |
Analyzing flaws in electric components by scanning acoustic microscopy |
|
| Vol 53, No 9 (2017) |
Acoustic Methods |
Experimental study of effects of water-cement ratio on the acoustic emission rate “a” values in concrete |
|
| Vol 53, No 9 (2017) |
Electromagnetic Methods |
Comparative analysis of the magnetic characteristics of plastically deformed metal in different zones of a welded pipe under elastic deformation |
|
| Vol 53, No 9 (2017) |
Electromagnetic Methods |
Effect of deformation martensite on the electrical and magnetic properties of plastically deformed chromium–nickel steel |
|
| Vol 53, No 9 (2017) |
Electromagnetic Methods |
Pulsed eddy current signal analysis of ferrous and non-ferrous metals under thermal and corrosion solicitations |
|
| Vol 53, No 9 (2017) |
Optical Methods |
Applying a ray tracing model of an optoelectronic system to improve the accuracy of endoscopic measurements |
|
| Vol 53, No 9 (2017) |
General Questions of Nondestructive Testing |
Failure of industrial pipelines due to low-frequency vibrations |
|
| Vol 53, No 10 (2017) |
Acoustic Methods |
Changes in echo-pulse instantaneous frequency when scanning the transducer |
|
| Vol 53, No 10 (2017) |
Acoustic Methods |
Eliminating saturation-type distortions in ultrasonic signals by the least-squares and Papoulis–Gerchberg algorithms |
|
| Vol 53, No 10 (2017) |
Magnetic Methods |
Relationship between the structure and physical-mechanical properties of U8A steel subjected to cold plastic deformation by hydrostatic extrusion |
|
| Vol 53, No 10 (2017) |
Thermal Methods |
Thermal nondestructive testing of materials and products: a review |
|
| Vol 53, No 10 (2017) |
Radiaton Methods |
The performance of some implicit region-based active contours in segmenting and restoring welding radiographic images |
|
| Vol 53, No 10 (2017) |
Ultrasonic Methods |
Ultrasonic pulse and resonance method–evaluation of the degree of damage to the internal structure of repair mortars caused by exposure to high temperatures |
|
| Vol 53, No 11 (2017) |
Magnetic Methods |
Computational relationships for the development of software for calculating magnetostatic fields from flaws in arbitrarily shaped ferromagnetic products |
|
| Vol 53, No 11 (2017) |
Magnetic Methods |
A calculation method for evaluating defect parameters in steel |
|
| Vol 53, No 11 (2017) |
Magnetic Methods |
A procedure and device for calibration-free determination of residual compression stresses in low-carbon steels deformed by tension |
|
| Vol 53, No 11 (2017) |
Magnetic Methods |
Measuring coercive force in local domains of a sample |
|
| Vol 53, No 11 (2017) |
Acoustic Methods |
Physical basics of evaluating elastic characteristics of anisotropic composites by ultrasonic method |
|
| Vol 53, No 11 (2017) |
Acoustic Methods |
On the resonance and antiresonance frequencies of a plate piezoceramic transducer |
|
| Vol 53, No 11 (2017) |
Acoustic Methods |
Assessment of thermally deteriorated concrete by drilling resistance test and sound level |
|
| Vol 53, No 11 (2017) |
Erratum |
Erratum to: “Determination of the principal parameter of ultrasonic pulse velocity and compressive strength of lightweight concrete by using variance method” |
|
| Vol 53, No 12 (2017) |
Acoustic Methods |
Applying an Ultrasonic Lamb Wave Based Rechnique to Testing the Condition of V96ts3T12 Aluminum Alloy |
|
| Vol 53, No 12 (2017) |
Acoustic Methods |
On the Possibility of Using Ultrasonic Surface and Head Waves in Nondestructive Quality Checks of Additive Manufactured Products |
|
| Vol 53, No 12 (2017) |
Acoustic Methods |
Examination of Reflection from a Disk using Linear Phased Array Probe in Immersion Mode |
|
| Vol 53, No 12 (2017) |
Acoustic Methods |
Powerful Sources for High Frequency Electromagnetic Transducers for Measurement, Monitoring and Diagnostics |
|
| Vol 53, No 12 (2017) |
Magnetic Methods |
Hardware for Inspection of Ferromagnetic Low Coercive-Force Articles |
|
| Vol 53, No 12 (2017) |
Magnetic Methods |
Magnetic Flux Leakage Signal Inversion Based on Improved Efficient Population Utilization Strategy for Particle Swarm Optimization |
|
| Vol 54, No 1 (2018) |
Acoustic Methods |
Experimental Ultrasonic Study of the Elastic Modulus of Glass Fiber Plastics in Constructions |
|
| Vol 54, No 1 (2018) |
Acoustic Methods |
Pattern-Noise in Ultrasonic Inspection of Articles Made of Complexly Structured Materials |
|
| Vol 54, No 1 (2018) |
Acoustic Methods |
Decreasing Pulse Duration at Receiver Output under Emitter Excitation with Complex Waveforms |
|
| Vol 54, No 1 (2018) |
Acoustic Methods |
Acoustic Evaluation of the Stress-Strained State of Welded Carbon Steel Joints after Different Modes of Heat Input |
|
| Vol 54, No 1 (2018) |
Acoustic Methods |
Instantaneous Frequency Estimation for Motion Echo Signal of Projectile in Bore Based on Polynomial Chirplet Transform |
|
| Vol 54, No 1 (2018) |
Acoustic Methods |
Damage Processes of Steel Fiber Reinforced Mortar in Different Fiber Content Revealed by Acoustic Emission Behavior |
|
| Vol 54, No 1 (2018) |
Electromagnetic Methods |
Peculiarities of Changes in the Desired Signal of a Magnetic Anisometer under Rotation of Its Attachable Sensor |
|
| Vol 54, No 1 (2018) |
Electromagnetic Methods |
Using Film Flux Detectors to Determine Properties of Conducting and Magnetic Objects |
|
| Vol 54, No 1 (2018) |
Electromagnetic Methods |
Tuning Out from Base Electric Conductivity in Conductive-Coating Thickness Gauging |
|
| Vol 54, No 2 (2018) |
Acoustic Methods |
An Acoustic Method for Evaluating the Quality of Thermal Processing of 44NKhTYu Alloy |
|
| Vol 54, No 2 (2018) |
Acoustic Methods |
Means for Increasing the Sensitivity of Acoustic Probing when Studying the Structure of Metals |
|
| Vol 54, No 2 (2018) |
Acoustic Methods |
Evaluation of the Size and Type of Flaws in a Railhead |
|
| Vol 54, No 2 (2018) |
Electromagnetic Methods |
Methods and Means for Inspecting the Phase Composition of Two- and Three-Phase Austenitic Steels |
|
| Vol 54, No 2 (2018) |
Electromagnetic Methods |
Calculating Distributions of Pulsed Magnetic Fields under Hysteretic Interference |
|
| Vol 54, No 2 (2018) |
Liquid Penetrant Testing |
Interaction of a Leak Molecular Flow with a Microfiber Sensor Considering Size Effect |
|
| Vol 54, No 2 (2018) |
Ultrasonic Methods |
Ultrasonic Flaw Echoes Detection Based on Generalized S-Transform |
|
| Vol 54, No 3 (2018) |
Acoustic Methods |
Thickness Gauging of Thin Metalware with Ultrasound Excited by Laser Nanopulses |
|
| Vol 54, No 3 (2018) |
Acoustic Methods |
Methods for Nondestructive Testing and Diagnostics of Durability of Articles Made of Polymer Composite Materials |
|
| Vol 54, No 3 (2018) |
Acoustic Methods |
Universal Waveguide for the Acoustic-Emission Evaluation of High-Temperature Industrial Objects |
|
| Vol 54, No 3 (2018) |
Acoustic Methods |
Studying Statistical Properties of Diagnostic Features in Vibroacoustic Signals of Ship Machinery |
|
| Vol 54, No 3 (2018) |
Electromagnetic Methods |
On the Question of Inspecting the Plate with a Crack by the Eddy-Current Method |
|
| Vol 54, No 3 (2018) |
Electromagnetic Methods |
Influence of Conductive Pollution on Eddy Current Sensor Signals |
|
| Vol 54, No 3 (2018) |
X-Ray Methods |
Effect of Radiant Energy on the Formation of Optical Image in X-Ray Inspections |
|
| Vol 54, No 3 (2018) |
Optical Methods |
A Contactless Method for Testing Inner Walls of Pipelines |
|
| Vol 54, No 4 (2018) |
Acoustic Methods |
Choosing Phased Array Pitch in Ultrasonic Tomography of Materials with Inhomogeneous Structure |
|
| Vol 54, No 4 (2018) |
Acoustic Methods |
Applying the Algorithm of Calculation in the Frequency Domain to Ultrasonic Tomography |
|
| Vol 54, No 4 (2018) |
Acoustic Methods |
On the Information Value of the Method of Invariants of Acoustic-Emission Signals in the Diagnostics of Pre-Failure State in Materials |
|
| Vol 54, No 4 (2018) |
Acoustic Methods |
Strength Tests of a CFRP Spar Using Methods of Acoustic Emission and Tensometry |
|
| Vol 54, No 4 (2018) |
Acoustic Methods |
An Intelligent System for Vibrodiagnostics of Oil and Gas Equipment |
|
| Vol 54, No 4 (2018) |
Acoustic Methods |
The Law of Response of LCR Wave in the Plastic and Elastic Deformation in A36 Steel |
|
| Vol 54, No 4 (2018) |
X-Ray Methods |
Some Specific Features of Studying Additive-Manufactured Parts by X-Ray Computed Tomography |
|
| Vol 54, No 4 (2018) |
Thermal Methods |
An Automated Practical Flaw-Identification Algorithm for Active Thermal Testing Procedures |
|
| Vol 54, No 4 (2018) |
Eddy-Current Methods |
Algorithms for Pre-Processing of Eddy-Current Signals when Inspecting Heat-Exchanger Pipes of NPP Steam Generators |
|
| Vol 54, No 4 (2018) |
Eddy-Current Methods |
Influence of Post Weld Heat Treatment in Friction Stir Welding of AA6061 and AZ61 Alloy |
|
| Vol 54, No 5 (2018) |
Acoustic Methods |
Determining the Speed of Longitudinal Waves in an Isotropic Homogeneous Welded Joint Using Echo Signals Measured by Two Antenna Arrays |
|
| Vol 54, No 5 (2018) |
Acoustic Methods |
Applying Special Spatiotemporal Signal Processing Algorithms to Ultrasonic Testing of Large Antique Cast Bells |
|
| Vol 54, No 5 (2018) |
Acoustic Methods |
Modernization of Vibration Analyzers Based on Identification Measurements |
|
| Vol 54, No 5 (2018) |
Acoustic Methods |
Attempt Towards the Replacement of Radiography with Phased Array Ultrasonic Testing of Steel Plate Welded Joints Performed on Bridges and Other Applications |
|
| Vol 54, No 5 (2018) |
Acoustic Methods |
Ultrasonic Velocity as a Tool for Physical and Mechanical Parameters Prediction within Geo-Materials: Application on Cement Mortar |
|
| Vol 54, No 5 (2018) |
Thermal Methods |
Comparing the Efficiency of Ultrasonic Infrared Thermography under High-Power and Resonant Stimulation of Impact Damage in a CFRP Composite |
|
| Vol 54, No 5 (2018) |
Thermal Methods |
Quality Control of Armor Fabric by Modeling Thermomechanical Processes under Projectile Impact |
|
| Vol 54, No 5 (2018) |
Electromagnetic Methods |
Studying a Signal due to the Tangential Component of Stray Fluxes from a Surface Flaw Detected with a Vibrating Induction Transducer |
|
| Vol 54, No 5 (2018) |
Electromagnetic Methods |
Eddy Current Testing of Metallic Materials Using Projection Methods |
|
| Vol 54, No 6 (2018) |
Acoustic Methods |
Studying the Effect of Microscopic Medium Inhomogeneity on the Propagation of Surface Waves |
|
| Vol 54, No 6 (2018) |
Acoustic Methods |
Processing of Backscattered Signal in Ultrasonic Testing |
|
| Vol 54, No 6 (2018) |
Acoustic Methods |
Simulation and Finite Element Analysis of Porous Piezoceramic Disk-Shaped Transducer with Plano-Concave Surface |
|
| Vol 54, No 6 (2018) |
Acoustic Methods |
Experimental Research of SAW-Sensors Applied to Atmospheric Leak Hunting |
|
| Vol 54, No 6 (2018) |
Acoustic Methods |
Investigation of Damage Processes of Mortar in Different Aggregate Size by Acoustic Emission Characteristics |
|
| Vol 54, No 6 (2018) |
Acoustic Methods |
Characterization of the Damage Process of Polypropylene Fiber Mortar at Medium Loading Rate by the Full Wave Acoustic Emission Technique |
|
| Vol 54, No 6 (2018) |
Radiation Nondestructive Testing |
Subsurface Radiolocation Tomography of Cables under Dual-Polarization Probing |
|
| Vol 54, No 6 (2018) |
Radiation Nondestructive Testing |
An Optimal Experimental-Monte Carlo Combined Model for Analyzing of the Cement Raw by Prompt Gamma Neutron Activation |
|
| Vol 54, No 6 (2018) |
Electrical Methods |
Benchmarking the Reliability of the Consignments of Semiconductor Articles Using Electrostatic Discharges |
|
| Vol 54, No 7 (2018) |
Acoustic Methods |
Small-Angle Acoustic Tomography under Shadow Testing with Antenna Arrays |
|
| Vol 54, No 7 (2018) |
Acoustic Methods |
Finite-Difference Time Domain Method. Calculating Echo Signals in Homogeneous Isotropic Materials |
|
| Vol 54, No 7 (2018) |
Acoustic Methods |
An Ultrasonic Method for Determining Adhesive Strength |
|
| Vol 54, No 7 (2018) |
Acoustic Methods |
Vibration-Based Diagnostics and Structural Analysis of Research on Nonlinear Dynamic Processes in Maglev-Suspension Rotor Turbomachines |
|
| Vol 54, No 7 (2018) |
Acoustic Methods |
Full Curve Damage Process of Polypropylene Fiber Reinforced Mortars under Dynamic Tensile Loading Based on Acoustic Emission Technique |
|
| Vol 54, No 7 (2018) |
Acoustic Methods |
An Analysis of Excitation Pulse Adjustable Signal of Ultrasonic Flaw Detection |
|
| Vol 54, No 7 (2018) |
Electrical Methods |
A Method for Evaluating Failure in Reinforced Concrete under Bending Based on the Response of Electrical Parameters to an Impact Action |
|
| Vol 54, No 7 (2018) |
Optical Methods |
The Model of a Fiber-Optic Sensor for Monitoring Mechanical Stresses in Mine Workings |
|
| Vol 54, No 7 (2018) |
Optical Methods |
Variation-of-Weight Method for Optimizing the Single and Group Diagnostics of Articles and Physical Media |
|
| Vol 54, No 8 (2018) |
Acoustic Methods |
Method of Finite Differences in Time Domain. Calculating Echo Signals in Anisotropic Inhomogeneous Materials, Pattern Noise |
|
| Vol 54, No 8 (2018) |
Acoustic Methods |
Influence of the Design Features of a Piezoelectric Transducer on Probing Signal Duration |
|
| Vol 54, No 8 (2018) |
Acoustic Methods |
Determining the Depth of Occurrence of Defects in Multilayer PCM Structures by Acoustic Methods Based on the Mechanical Impedance Value |
|
| Vol 54, No 8 (2018) |
Electromagnetic Methods |
Permanent-Magnet Structuroscopes under Rotational Magnetization Reversal in a Material |
|
| Vol 54, No 8 (2018) |
Electromagnetic Methods |
Determining Parameters of a Ferrofluid Based on the Temperature Dependence of Microwave Reflection Spectrum with Allowance for the Formed Agglomerates of Ferromagnetic Nanoparticles |
|
| Vol 54, No 8 (2018) |
X-Ray Methods |
Estimating the Influence of Quantum Noises on the Quality of Material Identification by the Dual-Energy Method |
|
| Vol 54, No 8 (2018) |
Thermal Methods |
Quantitative Analysis Procedure for Building Materials in Historic Buildings by Applying Infrared Thermography |
|
| Vol 54, No 8 (2018) |
Thermal Methods |
Modeling Temperature Distributions in Thermal Barrier Coatings with Various Thicknesses |
|
| Vol 54, No 9 (2018) |
Acoustic Methods |
Estimating the Probability of Detecting a Delamination in the Wall of Equipment Depending on the Set of Used Methods of Nondestructive Testing and Ways of Its Improvement |
|
| Vol 54, No 9 (2018) |
Acoustic Methods |
Ultrasonic Flaw Detection: Adjustment and Calibration of Equipment Using Samples with Cylindrical Drilling |
|
| Vol 54, No 9 (2018) |
Acoustic Methods |
Investigation of Acoustic Emission in Low-Carbon Steels during Development of Fatigue Cracks |
|
| Vol 54, No 9 (2018) |
Electromagnetic Methods |
Effect of Plastic Deformation on the Magnetic Properties of Rapid-Quenched Cobalt-Based Metal Wires |
|
| Vol 54, No 9 (2018) |
Electromagnetic Methods |
DIUS-1.15M Mobile Hardware–Software Structuroscopy System |
|
| Vol 54, No 9 (2018) |
X-Ray Methods |
Comparative Analysis of Various Definitions of the Concept of Effective Atomic Number of Material of a Multicomponent Object |
|
| Vol 54, No 10 (2018) |
Acoustic Methods |
On the Question of Monitoring Residual Stresses in Selectively Heat-Strengthened Rails |
|
| Vol 54, No 10 (2018) |
Electromagnetic Methods |
Remote Testing for Defects in In-Service High-Voltage Insulators |
|
| Vol 54, No 10 (2018) |
Electromagnetic Methods |
On the Well-Posedness of the Direct and Inverse Problem of Magnetostatics. Part 2 |
|
| Vol 54, No 10 (2018) |
Electromagnetic Methods |
Measurement of Electromagnetic Parameters of Metal-Coating Thickness Measures |
|
| Vol 54, No 10 (2018) |
Electromagnetic Methods |
Experimental Determination of Critical Fields of 90-Degree Domain Wall Displacement in Plastically Deformed Low-Carbon Steels |
|
| Vol 54, No 10 (2018) |
Electromagnetic Methods |
Magnetoimpedance Properties of Amorphous CoFeSiB Wires in a Wide Frequency Range: Focus on Sensor Applications |
|
| Vol 54, No 10 (2018) |
Electromagnetic Methods |
Solving the Inverse Geometric Problem of Magnetostatics for Corrosion Defects |
|
| Vol 54, No 10 (2018) |
Thermal Methods |
Infrared Thermographic Testing of Hybrid Materials Using High-Power Ultrasonic Stimulation |
|
| Vol 54, No 11 (2018) |
Acoustic Methods |
Applying Impact Loading for Revealing Cracks in Glass by Acoustic Emission Method |
|
| Vol 54, No 11 (2018) |
Acoustic Methods |
Acoustic-Emission Testing of Failure in Samples of CFRP Exposed to Static and Heat Loads |
|
| Vol 54, No 11 (2018) |
Optical Methods |
Analyzing the Accuracy of a Device for Controlling the Position of a Rotating Plane |
|
| Vol 54, No 11 (2018) |
Electromagnetic Methods |
On the Use of Multipurpose Software Packages for Solving Problems of Magnetostatics |
|
| Vol 54, No 11 (2018) |
Electromagnetic Methods |
Structural Sensitivity of the Parameters of Asymmetric “Coercive Return–Magnetization” Cycle in Heat-Treated Low-Carbon Steels |
|
| Vol 54, No 11 (2018) |
Electromagnetic Methods |
Improving the Reliability of Eddy-Current Quality Control of Soldering in Current-Carrying Copper Joints and Expanding the Nomenclature of Inspected Joints in Energy Equipment |
|
| Vol 54, No 11 (2018) |
Radiation Methods |
A Device for Thermal Treatment of Luminescence Ionizing-Radiation Detectors Intended for Radiation Nondestructive Testing |
|
| Vol 54, No 11 (2018) |
Radiation Methods |
Selecting Parameters of Detectors When Recognizing Materials Based on the Separation of Soft and Hard X-Ray Components |
|
| Vol 55, No 5 (2019) |
Acoustic Methods |
A Mirror Method for Measuring Directional Patterns in the Auxiliary (Azimuthal) Plane of Angle Transducers |
|
| Vol 55, No 5 (2019) |
Acoustic Methods |
Improving the Efficiency of Ultrasonic Testing Based on Additional Information on Defect Scattering Indicatrices |
|
| Vol 55, No 5 (2019) |
Acoustic Methods |
Discrete Wavelet Transform based Denoising of TOFD Signals of Austenitic Stainless Steel Weld at Elevated Temperature |
|
| Vol 55, No 5 (2019) |
Magnetic Methods |
Comparison of Magnetic Parameters of Quenched Pipe Steels with X-Ray–Evaluated Residual Macro- and Microstresses |
|
| Vol 55, No 5 (2019) |
Magnetic Methods |
On the Possibility of Evaluating Magnetostriction Characteristics of Bulk Ferromagnets Based on Their Magnetic Properties |
|
| Vol 55, No 5 (2019) |
Optical Methods |
Applying Digital Image Correlation Technique for Studying the Growth of a Fatigue Crack in VT23 Titanium Alloy Welded Joints |
|
| Vol 55, No 5 (2019) |
Optical Methods |
Attempt to Detect Nano Oil Film on the Surface of Polished KDP Crystal |
|
| Vol 55, No 5 (2019) |
Radiation Methods |
A Mathematical Model of Digital Linear Tomography |
|
| Vol 55, No 5 (2019) |
Vibration Diagnostics |
Nondestructive Testing of CubSat Satellite Body Using Laser Vibrometry |
|
| Vol 55, No 6 (2019) |
Acoustic Methods |
Structure Analysis of Products Made of Polymer Materials Using Instantaneous Spectra of Ultrasonic Signals |
|
| Vol 55, No 6 (2019) |
Acoustic Methods |
Nondestructive Testing of Structurally Inhomogeneous Composite Materials by the Method of Elastic-Wave Velocity Hodograph |
|
| Vol 55, No 6 (2019) |
Acoustic Methods |
Using “Focusing to a Point” Algorithm for Reference-Free Measurement of the Speed of Ultrasound in Tomography of Concrete Engineering Structures |
|
| Vol 55, No 6 (2019) |
Acoustic Methods |
Inverse Problems of Ultrasonic Tomography in Nondestructive Testing: Mathematical Methods and Experiment |
|
| Vol 55, No 6 (2019) |
Acoustic Methods |
Reference-Free Method for Thickness Gaging of a Test Object and Measuring the Speed of Longitudinal and Transverse Waves in It Based on Echo Signals Picked by an Antenna Array |
|
| Vol 55, No 6 (2019) |
Acoustic Methods |
Design of a Portable Frame Integrality Testing System Based on SOPC |
|
| Vol 55, No 6 (2019) |
Radiation Methods |
Computer Aided Radiograph Interpretation Tool for Defect Characterization from Weld Plates |
|
| Vol 55, No 7 (2019) |
Acoustic Methods |
Calculating Acoustic Channel for a Crack-Like Corrosion–Mechanical Defect |
|
| Vol 55, No 7 (2019) |
Acoustic Methods |
Applying the Algorithm of Calculation in the Frequency Domain to Ultrasonic Tomography of Layered Inhomogeneous Media Using Matrix Antenna Arrays |
|
| Vol 55, No 7 (2019) |
Acoustic Methods |
Analyzing the Phase of DFA Image for Determining the Type of Detected Reflector |
|
| Vol 55, No 7 (2019) |
Optical Methods |
Studying Optical Characteristics of Light Reflected by Protective Coatings |
|
| Vol 55, No 7 (2019) |
Optical Methods |
Smart-Camera–Based Linear Sizing |
|
| Vol 55, No 7 (2019) |
Thermal Methods |
Infrared Thermography and Generation of Heat under Deformation of Bioinert Titanium- and Zirconium-Based Alloys |
|
| Vol 55, No 7 (2019) |
Radiation Methods |
Tomographic Image Reconstruction in the Case of Limited Number of X-Ray Projections Using Sinogram Inpainting |
|
| Vol 55, No 8 (2019) |
Acoustic Methods |
Using Pseudoorthogonal Signals to Reduce Noise Level in Ultrasound Testing of Highly Absorptive Materials |
|
| Vol 55, No 8 (2019) |
Acoustic Methods |
Improving Procedures for Ultrasonic Pulse-Echo Testing of Rails in Production |
|
| Vol 55, No 8 (2019) |
Acoustic Methods |
Acoustic-Emission Monitoring of Airframe Failure under Cyclic Loading |
|
| Vol 55, No 8 (2019) |
Acoustic Methods |
Time-Frequency Analysis of Impact Echo Signals of Grouting Defects in Tunnels |
|
| Vol 55, No 8 (2019) |
Electromagnetic Methods |
Integrated Noncontact Diagnostics of the Operable Condition of High-Voltage Insulators |
|
| Vol 55, No 8 (2019) |
Electromagnetic Methods |
Electromagnetic Witness Transducers of Pre-Fracture of Structures |
|
| Vol 55, No 8 (2019) |
Electromagnetic Methods |
On the Sensitivity of Eddy Current Testing of Parts of Railway Rolling Stock |
|
| Vol 55, No 8 (2019) |
Thermal Methods |
An Automated Algorithm for Constructing Maps of Defects in Active Thermal Testing |
|
| Vol 55, No 8 (2019) |
Optical Methods |
Using Two-Beam Interferometry in Surface Deformation Monitoring Systems |
|
| Vol 55, No 9 (2019) |
Acoustic Methods |
Studying the Development of a Technological Defect in Complex Stressed Construction CFRP Using Digital Image Correlation and Acoustic Emission Methods |
|
| Vol 55, No 9 (2019) |
Acoustic Methods |
Studying Stability of CFRP Composites to Low-Energy Impact Damage by Laser Vibrometry |
|
| Vol 55, No 9 (2019) |
Acoustic Methods |
Research on Stability Problem of Ultrasonic Inverse Scattering Equation |
|
| Vol 55, No 9 (2019) |
Electromagnetic Methods |
Eddy Current Quality Control of Soldering in Superconducting Current-Carrying Joints with Allowance for the Effect of Cross Section Variations on Testing Results |
|
| Vol 55, No 9 (2019) |
Electromagnetic Methods |
Influence of Magnetization Options on Detection of Unwanted Inclusions in the Tonnage of Iron Ore |
|
| Vol 55, No 9 (2019) |
Radiation Methods |
Identification of Materials in Fragments of Large-Sized Objects in Containers by the Dual-Energy Method |
|
| Vol 55, No 9 (2019) |
Radiation Methods |
Limit Capabilities of Identifying Materials by High Dual- and Multi-Energy Methods |
|
| Vol 55, No 10 (2019) |
Acoustic Methods |
To the Question of Assessing the Sensitivity of Ultrasonic Testing of Welded Joints of Energy Industry Objects |
|
| Vol 55, No 10 (2019) |
Acoustic Methods |
Evaluating Damage Accumulated in Car Wheelset Axle Journals by the Ultrasonic Method Using Rayleigh and Head Waves |
|
| Vol 55, No 10 (2019) |
Acoustic Methods |
Imaging of Lamination Defect in Metallic Plate Based on Local Wavenumber Domain Analysis |
|
| Vol 55, No 10 (2019) |
Electromagnetic Methods |
To the Calculation of the Field of a Finite Magnetic Cylinder |
|
| Vol 55, No 10 (2019) |
Electromagnetic Methods |
Inverse Problem of Magnetostatics in Saturation Fields |
|
| Vol 55, No 10 (2019) |
Electromagnetic Methods |
Influence of Climate-Range Temperature on Magnetic Properties of Steels of Various Composition |
|
| Vol 55, No 10 (2019) |
Radiation Methods |
A New Method and Apparatus for High-Resolution γ-Radiographic Introscopy of Bulk Heavy-Metal Products and Blanks. First Application Results |
|
| Vol 55, No 10 (2019) |
Thermal Methods |
Non-Destructive Infrared Lock-in Thermal Tests: Update on the Current Defect Detectability |
|
| Vol 55, No 10 (2019) |
Magnetic Methods |
Sensing of Ellipsoidal Inclusions in a Biomedical Ti–6Al–4V Alloy by Magnetic Means |
|
| Vol 55, No 1 (2019) |
Acoustic Methods |
Determination of the Optimal Decomposition Layer of Wavelet De-Noising Based on Signal Band Feature |
|
| Vol 55, No 1 (2019) |
Electromagnetic Methods |
Testing for Discontinuities in Metals Using Film Flux Detectors |
|
| Vol 55, No 1 (2019) |
Electromagnetic Methods |
Applying Scanning Contact Potentiometry for Monitoring Incipient Cracks in Steels |
|
| Vol 55, No 1 (2019) |
Penetrant Testing |
Vacuum Intensification of Filling Defects with Penetrants under Liquid-Penetrant Testing |
|
| Vol 55, No 1 (2019) |
Radiation Methods |
Contrast Enhancement of Industrial Radiography Images by Gabor Filtering with Automatic Noise Thresholding |
|
| Vol 55, No 1 (2019) |
Thermal Methods |
Thermography Sequence Processing and Defect Edge Identification of TBC Structure Debonding Defects Detection Using Long-Pulsed Infrared Wave Non-Destructive Testing Technology |
|
| Vol 55, No 2 (2019) |
Acoustic Methods |
Lamb Wave Ultrasonic Detection of Barely Visible Impact Damages of CFRP |
|
| Vol 55, No 2 (2019) |
Acoustic Methods |
Modeling Magnetic, Electric, and Acoustic Fields of a Pass-Through Transducer When Testing Cylindrical Objects |
|
| Vol 55, No 2 (2019) |
Acoustic Methods |
Assessment of Scattered Damage in Structural Materials |
|
| Vol 55, No 2 (2019) |
Acoustic Methods |
Ultrasonic Quality Control of Hydroacoustic Antennas |
|
| Vol 54, No 12 (2018) |
Electromagnetic Methods |
Studying Field Dependence of Reversible Magnetic Permeability in Plastically Deformed Low-Carbon Steels |
|
| Vol 55, No 2 (2019) |
Acoustic Methods |
Discussion of the Definition for Acoustic Emission Event in the Time Series of Concrete Damage Process |
|
| Vol 55, No 2 (2019) |
Radiation Methods |
Numerical Modeling of Radiographic Images as the Basis for Correctly Designing Digital Radiography Systems of Large-Sized Objects |
|
| Vol 55, No 2 (2019) |
Radiation Methods |
Developing Metrological Assurance for Measurements of Optical Density of X-Ray Images in a Range of 0.2 to 6.3 |
|
| Vol 55, No 2 (2019) |
Radiation Methods |
Segmentation of Weld Defects Using Multiphase Level Set by the Piecewise-Smooth Mumford-Shah Model |
|
| Vol 55, No 2 (2019) |
Surface Methods |
Determining Yield Strength of Metals by Microindentation with a Spherical Tip |
|
| Vol 55, No 3 (2019) |
Acoustic Methods |
An Amplitude-Phase Method for Testing Acoustic Contact of Ultrasonic Transducer |
|
| Vol 55, No 3 (2019) |
Acoustic Methods |
Influence of The Passband of Frequency Filters on the Parameters of Acoustic Emission Pulses |
|
| Vol 55, No 3 (2019) |
Acoustic Methods |
Acoustic-Emission Testing of Vertical Steel Tanks in Hard-To-Reach Areas of the Far North |
|
| Vol 55, No 3 (2019) |
Acoustic Methods |
Recognition of Incipient Defects in the Units of Ship Machinery by Vibrodiagnostics Based on Optimum Decision Rules |
|
| Vol 55, No 3 (2019) |
Acoustic Methods |
Identification of Localized Void Defects in Composite by Recurrence Quantification Analysis of Ultrasonic Backscattered Signal |
|
| Vol 54, No 12 (2018) |
Electromagnetic Methods |
Distribution of Magnetic Flux in a Ferromagnetic Material in the Presence of a Nonferromagnetic Gap in the Composite Circuit |
|
| Vol 55, No 3 (2019) |
Acoustic Methods |
Damage Evolution Analysis of Mortar with Different w/c Ratio by Acoustic Emission Technique |
|
| Vol 55, No 3 (2019) |
Electromagnetic Methods |
Eddy-Current System for Testing Inner Diameter of Pipes |
|
| Vol 55, No 3 (2019) |
Electromagnetic Methods |
Detecting Extended Complex-Shaped Defects in Electroconductive Plates Using a Magnetic Carrier |
|
| Vol 55, No 3 (2019) |
Electromagnetic Methods |
Magnetic Testing of Stressed State of Hydrotested Gas-Separator Wall |
|
| Vol 55, No 3 (2019) |
Electromagnetic Methods |
Study of a Finite-Element-Based Spatial Distribution Model for Coal-Mining Wire-Rope Detection Signal |
|
| Vol 55, No 3 (2019) |
Thermal Methods |
Active Thermal Testing of Delaminations in Heat-Shielding Structures |
|
| Vol 55, No 4 (2019) |
Acoustic Methods |
Multifrequency Langevin-Type Ultrasonic Transducer |
|
| Vol 55, No 4 (2019) |
Acoustic Methods |
Developing an Acoustic Method for Determining the Degree of Hydrogenation in Structures Made of Titanium Alloys |
|
| Vol 55, No 4 (2019) |
Acoustic Methods |
Reconstructing the Amplitudes of Radiation of a Defect Based on Acoustic Emission Signals at the Free Boundary of a Massive Body |
|
| Vol 55, No 4 (2019) |
Acoustic Methods |
Investigation of the Lamb Wave Modes Sensitivity in the Inspection of Bonding between Aluminum and Composite Patch |
|
| Vol 54, No 12 (2018) |
Electromagnetic Methods |
Magnetic Method for Nondestructive Testing of Rebar in Concrete |
|
| Vol 55, No 4 (2019) |
Electromagnetic Methods |
Detectability of Rail Defects by Magnetic Flux Leakage Method |
|
| Vol 55, No 4 (2019) |
Electromagnetic Methods |
Evaluating Specific Electrical Conductivity of Two-Layered Nonmagnetic Objects by Pulsed Eddy-Current Method |
|
| Vol 55, No 4 (2019) |
Electromagnetic Methods |
Developing a Nondestructive Method for Revealing Defective Areas in Reinforced Concrete Under Bending Conditions |
|
| Vol 55, No 4 (2019) |
Electromagnetic Methods |
Evaluation of Damage Degree of Inconel 718 Alloy with the Use of Non-Destructive Methods |
|
| Vol 55, No 4 (2019) |
Radiation Methods |
Specific Features of Material Recognition by the Multi-Energy X-Ray Method |
|
| Vol 55, No 4 (2019) |
Radiation Methods |
A Betatron Tomograph for Nondestructive Testing of Products with a Diameter up to 1000 mm Made of High-Energy Materials |
|
| Vol 55, No 4 (2019) |
Radiation Methods |
Measuring Residual Stresses in Vamas International Calibration Block with the Stress Diffractometer of Ir-8 Reactor |
|
| Vol 55, No 4 (2019) |
Radiation Methods |
Development of Digital Inspection Algorithms for X-Ray Radiography Casting Images |
|
| Vol 54, No 12 (2018) |
Electromagnetic Methods |
A Method of Pulsed Magnetic Testing for Discontinuities in Objects Made of Diamagnetic and Paramagnetic Metals Using a Magnetic Carrier |
|
| Vol 55, No 1 (2019) |
Acoustic Methods |
Determining Porosity of Monolithic Zones in Aircraft Parts and Assemblies Made of PCMs Using Ultrasound Pulse Echo Method |
|
| Vol 55, No 1 (2019) |
Acoustic Methods |
In-Production Nondestructive Testing of Internal Stresses in Rails Using Acoustoelasticity Method |
|
| Vol 55, No 1 (2019) |
Acoustic Methods |
Investigating Measurement Errors in Dual-Frequency Probing Technique by Mathematical Modeling |
|
| Vol 55, No 1 (2019) |
Acoustic Methods |
On the Creep of High-Temperature Rotors in Steam Power Turbines |
|
| Vol 54, No 12 (2018) |
Acoustic Methods |
Criterion Parameters for Assessing Degradation of Composite Materials by Acoustic Emission Testing |
|
| Vol 54, No 12 (2018) |
Acoustic Methods |
Distribution of Elastic Displacements and Mechanical Stresses in a Laminated Transducer with Amplitude-Phase Excitation |
|
| Vol 54, No 12 (2018) |
Acoustic Methods |
Recognition of Corrosion Severity Using Modal Acoustic Emission on a Thin Plate |
|
| Vol 54, No 12 (2018) |
Electromagnetic Methods |
Stray Field of Plate with a Surface Defect in a Homogeneous External Field |
|
| Vol 54, No 12 (2018) |
Electromagnetic Methods |
Solving the Inverse Geometric Problem of Magnetostatics for Corrosion Defects with Allowance for Nonlinear Properties of Ferromagnet |
|
| Vol 55, No 1 (2019) |
Acoustic Methods |
To the Question about the Thickness of Informative Layer in Magnetic-Noise Testing |
|
| Vol 55, No 11 (2019) |
Acoustic Methods |
Applying the Whitening Transformation to Echo Signals for Reducing Pattern Noise in Ultrasonic Testing |
|
| Vol 55, No 11 (2019) |
Acoustic Methods |
Acoustic-Emission Monitoring of Nonequilibrium Stage of Electrolysis |
|
| Vol 55, No 11 (2019) |
Acoustic Methods |
Ultrasonic Assessment of Damage in Concrete under Compressive and Thermal Loading Using Longitudinal and Transverse Waves |
|
| Vol 55, No 11 (2019) |
Acoustic Methods |
Analysis of Guided Waves Dispersion and Acoustoelastic Effect in Stressed Waveguides by Eigenfrequency Method and Experimental Study |
|
| Vol 55, No 11 (2019) |
Electromagnetic Methods |
Some Features in the Behavior of Magnetic and Acoustic Characteristics of Hot-Rolled 08G2B Steel under Cyclic Loading |
|
| Vol 55, No 11 (2019) |
Electromagnetic Methods |
Measuring Ferromagnetic Phase Content Based on Magnetic Properties in Two-Phase Chromium–Nickel Steels |
|
| Vol 55, No 11 (2019) |
Electromagnetic Methods |
Measuring Magnetic Permeability of Monolithic Annular Measures in Alternating Magnetic Fields |
|
| Vol 55, No 11 (2019) |
Electromagnetic Methods |
Gas Pipeline Corrosion Mapping Through Coating Using Pulsed Eddy Current Technique |
|
| Vol 55, No 11 (2019) |
Radiation Methods |
Polytetrafluorethylene in High-Dose EPR Dosimetry for Monitoring Radiation Technologies |
|
| Vol 55, No 12 (2019) |
Acoustic Methods |
Analyzing the Development of Rail Defects Based on Results of Multichannel Periodic Testing |
|
| Vol 55, No 12 (2019) |
Acoustic Methods |
Selecting the Pitch of a Double Crystal Transducer in Ultrasonic Testing of Products Made of Complex Structured Materials with a Nonplanar Surface |
|
| Vol 55, No 12 (2019) |
Acoustic Methods |
Acoustic-Emission Procedure for Rejecting Defects in Multiple-Pass Girth Welds |
|
| Vol 55, No 12 (2019) |
Acoustic Methods |
In-Process Monitoring of Nickel-Based Super Alloy Grinding Using the Acoustic Emission Method |
|
| Vol 55, No 12 (2019) |
Acoustic Methods |
The Influence of Concrete Nonlinear Elastic Behavior under Tensile Stresses on Longitudinal and Shear Ultrasonic Pulse Propagation |
|
| Vol 55, No 12 (2019) |
Electromagnetic Methods |
Monitoring the Changes in Titanium Defect Structure during Titanium Hydrogen Saturation |
|
| Vol 55, No 12 (2019) |
Electromagnetic Methods |
Coercimetry with Magnetization by a U-Shaped Electromagnet |
|
| Vol 55, No 12 (2019) |
Electromagnetic Methods |
On the Possibility of In-Process Magnetic Detection of Flaws in Rails |
|
| Vol 55, No 12 (2019) |
Electromagnetic Methods |
Hysteretic Interference of Time-Overlapping Magnetic Field Pulses |
|
| Vol 55, No 12 (2019) |
Radiation Methods |
Non-Destructive Testing and Evaluation of Friction Stir Welded AA6063 Circularly Butted Pipes |
|
| Vol 55, No 12 (2019) |
Radiation Methods |
Mathematical Behavior of Optical Density of γ-Ray Radiography Images of Steel Pipes |
|
