| 期 |
标题 |
文件 |
| 卷 80, 编号 1 (2013) |
A device for separation of cabbage heap from loose leaves |
|
|
Toncheva N., Aleksandrova U., Alatyrev S., Kruchinkina I.
|
| 卷 81, 编号 5 (2014) |
Device for moisture removal from manure mass |
|
|
Makhmutov M., Zabirov F., Khismatullina Y., Makhmutov M.
|
| 卷 79, 编号 3 (2012) |
A device for the energy saturation of fuel |
|
|
Simdyankin A., Simdyankina Y., Kaykatsishvili G.
|
| 卷 81, 编号 9 (2014) |
Device for cabbage harvester intended for cabbage heads laying in a carriage body |
|
|
Grigoryev A., Alatyrev A.
|
| 卷 77, 编号 3 (2010) |
Device with self-regulation of power for warming-up of engine in the winter season |
|
|
Shuvalov A., Telegin P.
|
| 卷 81, 编号 2 (2014) |
Utilitarian cargo and passenger light vehicle for rural residents |
|
|
Dzotsenidze T.
|
| 卷 81, 编号 4 (2014) |
Elaboration of segmentation method for the Russian market of agricultural tractors |
|
|
Mininzon V., Parfenov A.
|
| 卷 81, 编号 4 (2014) |
Specified calculation of multi-disc adaptive friction clutches |
|
|
Shishkarev M., Vu T.
|
| 卷 76, 编号 8 (2009) |
Аccounting residual stresses by improving technologies of parts recovering |
|
|
Ignatyev A., Korotkov V., Ignatyev G.
|
| 卷 76, 编号 1 (2009) |
90th anniversary of F. I. Yalovenko |
|
|
- -.
|
| 卷 87, 编号 6 (2020) |
Factors affecting the change in wheel resistance and track depth of wide-grip sprinkler machines |
(Rus)
|
|
Zhuravleva L., Tkhuan N.
|
| 卷 78, 编号 10 (2011) |
Factors influencing the parameter of crankcase gases flow as the main indicator of the cylinder-piston group technical state |
|
|
Nikolayev Y., Nistratova N.
|
| 卷 80, 编号 1 (2013) |
Key deterioration factors of hydrostatic bearings of the axial-piston hydraulic machines |
|
|
Baryshev V., Panov V.
|
| 卷 88, 编号 3 (2021) |
Physico-chemical characteristics of particulate contamination in the coolant for automobile and tractor engines |
(Rus)
|
|
Dragomirov S., Eydel P., Gamayunov A., Dragomirov M.
|
| 卷 89, 编号 2 (2022) |
Physical and chemical analysis of watered engine oil |
(Rus)
|
|
Kolunin A.
|
| 卷 84, 编号 4 (2017) |
PHYSICAL MODELING OF GAS-DIESEL ENGINE OPERATIONAL PROCESS |
(Rus)
|
|
Shatrov M., Khachiyan A., Sinyavskiy V., Shishlov I., Vakulenko A.
|
| 卷 79, 编号 9 (2012) |
Configuration of vortex chambers and air flow velocity in the crushing chamber of a hammer crusher |
|
|
Baranov N., Zykin A.
|
| 卷 78, 编号 12 (2011) |
A form of two-sided wedge with minimum sticking |
|
|
Svechnikov P.
|
| 卷 80, 编号 8 (2013) |
Shape of curvilinear separating surfaces of a gravitational separator |
|
|
Shatskiy V., Popov A., Petrischev I.
|
| 卷 78, 编号 8 (2011) |
Developping a knowledge base for the automated system of diesel engines testing |
|
|
Galiullin L.
|
| 卷 84, 编号 12 (2017) |
Formation the driving force of wheeled and caterpillar machine-tractor units |
(Rus)
|
|
Makhmutov M., Khismatullina Y.
|
| 卷 88, 编号 4 (2021) |
Formation of the dynamic system of the test bench for transmissions at the design stage |
(Rus)
|
|
Godzhayev Z., Shekhovtsov V., Lyashenko M., Merlyak V., Filippov N.
|
| 卷 79, 编号 3 (2012) |
Formation of quantitative and age composition of tractor fleet in conditions of unprofitable agricultural production |
|
|
Shevtsov V., Lavrov A.
|
| 卷 78, 编号 9 (2011) |
Formation of compact in the channel of press matrix |
|
|
Podkolzin Y.
|
| 卷 76, 编号 11 (2009) |
Forming a comprehensive program of machine and tractor fleet maintenance and repair |
|
|
Kokorev G., Uspenskiy I., Nikolotov I.
|
| 卷 81, 编号 4 (2014) |
Microprofile formation on the surface of 65Г steel under friction with МК-5 metalloceramic friction material |
|
|
Ilyuschenko A., Dmitrovich A., Leshok A.
|
| 卷 80, 编号 2 (2013) |
Formation of towed load depending on the moment of resistance |
|
|
Zhutov A., Karsakov A., Avramov V.
|
| 卷 80, 编号 12 (2013) |
Internal combustion engine power augmentation, production modernization, parts wear resistance and durability |
|
|
Kochenov V., Goyeva V., Grishin N., Kazakov S.
|
| 卷 78, 编号 6 (2011) |
«Expopriority-2011» forum - the major event of the year |
|
|
- -.
|
| 卷 79, 编号 6 (2012) |
Forum on metal-working industry in Expocentre |
|
|
- -.
|
| 卷 79, 编号 10 (2012) |
Forum on intellectual property Expopriority-2012 |
|
|
- -.
|
| 卷 79, 编号 5 (2012) |
A fractal model of soil structure |
|
|
Makhmutov M., Vorobiov Y., Imamov I., Pakhunova R.
|
| 卷 78, 编号 6 (2011) |
Friction materials for hydromechanical transmissions |
|
|
Ilyuschenko A., Dmitrovich A., Shapovalova O., Leshok A.
|
| 卷 86, 编号 1 (2019) |
Frictional steering devices in two-flow transmissions of transport caterpillar vehicles |
(Rus)
|
|
Demidov N., Dobretsov R., Medvedev M.
|
| 卷 79, 编号 12 (2012) |
MK-5 frictional material produced with the use of free filled layer technology |
|
|
Ilyuschenko A., Leshok A., Shapovalova O.
|
| 卷 77, 编号 1 (2010) |
Functional schema of grain combine thresher |
|
|
Zan'ko N.
|
| 卷 79, 编号 4 (2012) |
The functional purpose of vehicles for the rural settlements |
|
|
Dzotsenidze T., Levshin A., Yevtyushenkov N., Kozlovskaya M., Myagkov A.
|
| 卷 84, 编号 6 (2017) |
Functional capabilities of the experimental unit for introducing into the soil aqueous solutions of fertilizers |
(Rus)
|
|
Dzhibilov S., Gulueva L.
|
| 卷 81, 编号 1 (2014) |
Functional tests of a heavy-duty disk harrow equipped with ski device intended for plants knocking down and preliminary deformation |
|
|
Kravchuk V., Davydyuk V.
|
| 卷 80, 编号 5 (2013) |
F.Kh. Burumkulov |
|
|
- -.
|
| 卷 76, 编号 2 (2009) |
Characteristics of mixing loose materials bygrinding |
|
|
Baranov N., Fufachev V., Sergeev A.
|
| 卷 84, 编号 9 (2017) |
Characteristics of external influences on the operation of machine-tractor units |
(Rus)
|
|
Kambulov S., Rykov V., Bozhko I., Kolesnik V.
|
| 卷 84, 编号 9 (2017) |
The characteristic of innovations of working bodies for sowing in technology of soil-free tillage and sowing |
(Rus)
|
|
Bespamyatnova N., Bespamyatnov Y., Kolin'ko A.
|
| 卷 84, 编号 11 (2017) |
Running gear of machine-tractor units and their influence on the quality of performed operations |
(Rus)
|
|
Kambulov S., Rykov V., Bozhko I., Kolesnik V.
|
| 卷 82, 编号 2 (2015) |
Cold forging of plunger tappet |
|
|
Filippov Y., Ryabov V., Ragulin A., Zaytsev A., Anfimov Y., Yevsikov R., Levchenko P.
|
| 卷 82, 编号 7 (2015) |
Cold extrusion of hollow eccentric workpiece for high-pressure pump of diesel engine |
|
|
Filippov Y., Zaytsev A.
|
| 卷 80, 编号 7 (2013) |
Target functions of parameters optimization of technological equipment precision |
|
|
Komarov V., Grigoryev A., Martyshkin A.
|
| 卷 84, 编号 3 (2017) |
THE CALCULATION OF THE DEPENDENT TOLERANCE ALIGNMENT REPAIR SHAFTS GEAR BOXES |
(Rus)
|
|
Leonov O., Vergazova Y., Antonova U.
|
| 卷 88, 编号 1 (2021) |
Digital on-board clutch tester |
(Rus)
|
|
Gerashchenko V., Lobakh V., Kovalenko N., Rogozhin V.
|
| 卷 81, 编号 8 (2014) |
Digital sowing device |
|
|
Khizhnyak V., Avramenko F., Yatsenko P.
|
| 卷 88, 编号 2 (2021) |
Digital rotation meter |
(Rus)
|
|
Gerashchenko V., Lobakh V., Kovalenko N., Bilyk O.
|
| 卷 76, 编号 8 (2009) |
Frequency-and-dispersive index for assessment of out-of-straightness of cultivated crop rows |
|
|
Nadykto V., Nazarova O., Chernaya T.
|
| 卷 77, 编号 7 (2010) |
Chelyabinsk tractor plant on the International exhibition «Building Machinery and technologies 2010» |
|
|
- -.
|
| 卷 83, 编号 1 (2016) |
Numerical simulation of heat and hydraulic characteristics of heat exchange surfaces of plate-finned heat exchangers |
(Rus)
|
|
Akhmedshin Y., Vyaznikov M., Rumyantsev V.
|
| 卷 80, 编号 11 (2013) |
Strength and staff of technical support service in animal husbandry |
|
|
Kovaliov L., Kovaliov I.
|
| 卷 79, 编号 8 (2012) |
Readings of Agricultural Sciences Academician V.N. Boltinskiy |
|
|
- -.
|
| 卷 78, 编号 11 (2011) |
Roughness of interior surface of hollow fingers and their durability during the non-central direct arch |
|
|
Zasypkin A., Dementyev V., Sterkhov M., Churkin A.
|
| 卷 81, 编号 2 (2014) |
Low pressure tire as an optimal mover for vehicles on weak soils |
|
|
Kotlyarenko V., Goncharenko S., Godzhayev Z., Shapiro V.
|
| 卷 76, 编号 10 (2009) |
An auger-type oil press |
|
|
Shevchuk R., Vasil'kevich V., Tom'yuk V., Bazilyak L.
|
| 卷 83, 编号 10 (2016) |
Noise in cab of a crawler agricultural tractor |
(Rus)
|
|
Belyy I., Bogdanova I.
|
| 卷 89, 编号 3 (2022) |
The evolution of design of general purpose tracked tractors |
|
|
Tsench Y., Kosenko V., Sharov V.
|
| 卷 79, 编号 7 (2012) |
Ejection system of distributed supply of gaseous fuel into diesel engine |
|
|
Volodin V., Zagorodskikh B., Bebenin Y.
|
| 卷 79, 编号 8 (2012) |
Environmental diagnostics of tractors and self-propelled machines |
|
|
Nikolayev Y., Nistratova N.
|
| 卷 82, 编号 2 (2015) |
Environmentally friendly process of reinforcement of cutting tools |
|
|
Chekalova Y., Pini B.
|
| 卷 78, 编号 9 (2011) |
Environmental aspects of agricultural mechanization |
|
|
Kolchin N.
|
| 卷 86, 编号 3 (2019) |
Environmental aspects of processing chernozem with high-speed tools |
(Rus)
|
|
Zvolinsky V.
|
| 卷 92, 编号 3 (2025) |
Environmental prospects of “hydrogen” electricity for transport |
|
|
Kulchitskiy A.
|
| 卷 82, 编号 4 (2015) |
Environmental performance of diesel engines and ways to improve it |
|
|
Boyarenok A., Podchinok V., Parkhomenko A.
|
| 卷 89, 编号 5 (2022) |
Ecological and reclamation method of tillage |
|
|
Tarasenko B., Drobot V., Sokolova V., Orekhovskaya A.
|
| 卷 80, 编号 7 (2013) |
Economic assessment of a soil cultivating cutter with B-shaped two-stage knives |
|
|
Mozhayev Y., Dzhabbarov A.
|
| 卷 88, 编号 6 (2021) |
Economic feasibility of using the technology of carbon-vibro-arc hardening for hardening the pointed paws of tillage machinery |
(Rus)
|
|
Titov N., Kolomeychenko A., Vinogradov V., Kolomeychenko A.
|
| 卷 90, 编号 3 (2023) |
Economical efficiency of using a diesel-powered electric plant combined with an air heat pump |
|
|
Frolov M., Shatalova I., Shkarin K., Sokolov D.
|
| 卷 77, 编号 12 (2010) |
Economic aspects of root crops harvesting |
|
|
Martynov V.
|
| 卷 76, 编号 3 (2009) |
Economical and ecological indicesof a diesel by the work on the different grade biodiesel fuels |
|
|
Semenov V., Vasilyev I.
|
| 卷 81, 编号 10 (2014) |
Efficient depth of primary soil cultivation |
|
|
Blednykh V., Svechnikov P.
|
| 卷 78, 编号 5 (2011) |
Fuel savings through the use of absorptive air conditioners in agricultural machinery |
|
|
Shatalov I., Antipov Y., Barskiy I., Valyekho Maldonado P.
|
| 卷 79, 编号 10 (2012) |
Experimental assessment of wear and plastic deformations of the hydraulic cylinder elastomeric seals |
|
|
Borisov V., Kuznetsov V., Vodyakov V., Kotin A.
|
| 卷 91, 编号 3 (2024) |
Experimental assessment of strength characteristics of anthropogenic soils in a given mining area for justification of tractor propulsion type |
|
|
Zakharov A., Volskaya N., Zhurkin M., Ilyichev I.
|
| 卷 79, 编号 8 (2012) |
Experimental evaluation of the distribution of coated seeds |
|
|
Kireyev I., Koval Z.
|
| 卷 89, 编号 2 (2022) |
Experimental assessment of the temperature state of tractor diesel pistons |
(Rus)
|
|
Belov V., Apelinskiy D., Bezhenar V.
|
| 卷 87, 编号 6 (2020) |
Experimental evaluation of traction properties of ultra-low pressure tires |
(Rus)
|
|
Goncharenko S., Godzhaev Z., Artemov A., Pryadkin V., Godzhaev T.
|
| 卷 77, 编号 8 (2010) |
Experimental evaluation of wide-profile tire roadhold |
|
|
Zaytsev S., Streblechenko L., Goncharenko S., Pryadkin V.
|
| 卷 87, 编号 1 (2020) |
The experimental evaluation of the effectiveness of the regenerative drive of the working bodies of a combine harvester |
(Rus)
|
|
Dubovik D., Pershukevich N., Pribyl'skij V., Baran O., SHantyko A., Vyrskij A.
|
| 卷 76, 编号 8 (2009) |
Experimental beet drill with spring-loaded seed pusher |
|
|
Laryushin N., Kukharev O., Semov I.
|
| 卷 84, 编号 6 (2017) |
The experimental setup for the study of soil-working bodies |
(Rus)
|
|
Bozhko I., Parkhomenko G., Gromakov A., Maksimenko V., Kambulov S.
|
| 卷 91, 编号 5 (2024) |
Experimental study of aluminum alloys and their welded joints for compliance with roll-over protection structures requirements according to the GOST ISO 3471-2015 |
|
|
Vdovin D., Aleksandrov D., Sinyukov N., Rudkov D.
|
| 卷 81, 编号 1 (2014) |
Experimental research of motor-and-tractor starters’ wear resistance |
|
|
Sharkov O.
|
| 卷 89, 编号 3 (2022) |
The experimental study of mechanical losses in the modern diesel engine |
|
|
Khannanov M., Gumerov I., Fardeev L., Kulikov A., Alimgulov E.
|
| 卷 83, 编号 1 (2016) |
Experimental research of performance of diesel engine operating on mixed fuel |
(Rus)
|
|
Nagornov S., Mescheryakova Y., Mescheryakov A.
|
| 卷 84, 编号 5 (2017) |
Experimental study of the elastic S-shaped cultivator rack |
(Rus)
|
|
Fedorov S., Chatkin M., Zhalnin A., Zhalnin N.
|
| 卷 83, 编号 10 (2016) |
Experimental research of conditions of cylinder oil supply in high-speed four-stroke internal-combustion engine |
(Rus)
|
|
Putintsev S., Ageev A.
|
| 卷 84, 编号 11 (2017) |
Exper-imental study of the characteristics of tractor pneumatic tires |
(Rus)
|
|
Parkhomenko S., Parkhomenko G.
|
| 卷 90, 编号 2 (2023) |
Experimental definition of lateral stiffness of a pneumatic wheel of the MTZ-82 “Belarus” tractor |
|
|
Novikov V., Pozdeev A., Erontaev V., Chumakov D., Kolesov N., Timoshin N., Kagochkin T.
|
| 卷 84, 编号 12 (2017) |
Experimental determination of the main load factor of threaded connection of connecting rod head with oblique connector |
(Rus)
|
|
Gots A.
|
| 卷 88, 编号 3 (2021) |
Experimental determination of the parameters of the characteristics of the seat suspension for automotive vehicles |
(Rus)
|
|
Godzhayev Z., Lyashenko M., Shekhovtsov V., Potapov P., Dolotov A., Iskaliyev A.
|
| 卷 80, 编号 2 (2013) |
Experimental determination of leaking into drainage cavity of axial piston motors |
|
|
Makarkin I., Kapustkin A.
|
| 卷 77, 编号 4 (2010) |
Experimental and theoretical assessment of parameters of mixing chamber of a grain crusher |
|
|
Savinykh P., Aleshkin A., Kazakov V.
|
| 卷 82, 编号 9 (2015) |
Theoretical and experimental researches of working process of mixing and fermenting tank in heating mode |
|
|
Savinykh P., Bulatov S., Panasenko A., Svistunov A.
|
| 卷 81, 编号 10 (2014) |
Experimental investigation of gas diesel engine of К-700А tractor |
|
|
Volodin V., Zagorodskikh B., Markov V., Furman V.
|
| 卷 83, 编号 2 (2016) |
Experimental researches of a self-propelled potato harvester equipped with separation process control system |
(Rus)
|
|
Slavkin V., Belov M., Krasnyaschikh K., Pronin V., Zhuravlev A.
|
| 卷 81, 编号 5 (2014) |
Experimental investigation of diagnostic system for the Д-245-35 motor-and-tractor engine turbocharging |
|
|
Inshakov A., Kuvshinov A., Kurbakov I., Kornaukhov O.
|
| 卷 83, 编号 9 (2016) |
Experimental studies of characteristics of vibration protection elements for operator workplace of industrial tractor |
(Rus)
|
|
Berezin I., Pronina Y., Bondar' V., Vershinskiy L., Taranenko P.
|
| 卷 83, 编号 9 (2016) |
Experimental research of electro-hydraulic proportional valve of mechatronic control system of automatic gearbox |
(Rus)
|
|
Tarasik V., Savitskiy V.
|
| 卷 81, 编号 11 (2014) |
Experimental method for determination of systematic errors of power characteristics measurement of working organs of tillage tools |
|
|
Myalenko V.
|
| 卷 86, 编号 1 (2019) |
Experimental test bench for the study of a power plant with a biogas internal combustion engine |
(Rus)
|
|
Boloev P., Druz'yanova V., Petrov N.
|
| 卷 80, 编号 2 (2013) |
Operational loading of a crawler bulldozer and ripper aggregate and modeling of its dynamics |
|
|
Khalturin V., Berezin I., Bondar V., Kostyuchenko V., Abyzov A.
|
| 卷 78, 编号 1 (2011) |
Thread connections' operational reliability |
|
|
Yegozhev A.
|
| 卷 81, 编号 7 (2014) |
Operational and technological parameters of mounted ploughs of the ПБС-family |
|
|
Boykov V., Startsev S., Sayapin O.
|
| 卷 81, 编号 4 (2014) |
Performance testing of a combined device for toxicity decreasing of exhaust gases |
|
|
Chernetsov D., Kapustin V.
|
| 卷 83, 编号 6 (2016) |
Operational requirements to STA-5ZhO replaceable technological superstructure for transportation and subsoil application of liquid organic fertilizers based on Ural-432065 vehicle chassis |
(Rus)
|
|
Shkel' A., Kozlovskaya M., Dzotsenidze T.
|
| 卷 80, 编号 3 (2013) |
Performance characteristics of an adaptive friction clutch of 2nd generation with separate force-closure |
|
|
Shishkariov M., Luschik A.
|
| 卷 82, 编号 3 (2015) |
Exploitation effects of using minerals as active agents of lubricants |
|
|
Dolgopolov K., Lyubimov D., Pustovoy I., Shabanov A., Kolesnikov I.
|
| 卷 77, 编号 9 (2010) |
Expocentre on the threshold of the «chemistry year» |
|
|
- -.
|
| 卷 80, 编号 3 (2013) |
EXPOCENTRE-2012: figures and facts |
|
|
- -.
|
| 卷 88, 编号 2 (2021) |
Determination of the optimal composition of mixed fuel based on environmental indicators of diesel engine |
(Rus)
|
|
Plotnikov S., Gnevashev P.
|
| 卷 77, 编号 8 (2010) |
Express-report |
|
|
- -.
|
| 卷 76, 编号 1 (2009) |
Electro-2008 |
|
|
Ivanov A.
|
| 卷 81, 编号 9 (2014) |
Electric traction and electric power take-off of agricultural tractor |
|
|
Amelchenko P., Zhukovskiy I., Stasilevich A., Klyuchnikov A., Zhukovskiy A.
|
| 卷 80, 编号 2 (2013) |
Electric vibrating electrode arc strengthening of working organs of soil cultivating machines with the use of ceramic-metal materials |
|
|
Litovchenko N., Titov N., Kolomeychenko A.
|
| 卷 77, 编号 10 (2010) |
An electro-hydrodynamic engine for the environmentally safe transport |
|
|
Sokovikov V., Strokov P.
|
| 卷 77, 编号 7 (2010) |
The electro-spark processing of metallic surfaces |
|
|
Kupriyanov I., Alov V., Yeparkhin O., Sotskaya I.
|
| 卷 92, 编号 2 (2025) |
Electric heaters with the effect of self-regulation of fuel system temperature in diesel engines |
|
|
Shchegolkov A., Shchegolkov A.
|
| 卷 81, 编号 10 (2014) |
Electronic on-board control system of operational and technological parameters of cotton harvesting units |
|
|
Ulzhayev E., Ubaydullayev U., Ulzhayev Z.
|
| 卷 79, 编号 6 (2012) |
Electrotechnology of microarc oxidation of light alloys |
|
|
Shichkov L., Lyudin V., Epelfeld A.
|
| 卷 81, 编号 4 (2014) |
Elements of interaction between potato tubers and rotary separator |
|
|
Shukhanov S., Kuzmin A., Ostroumov S.
|
| 卷 81, 编号 6 (2014) |
Sealing components of sowing device of overpressure |
|
|
Popov A.
|
| 卷 79, 编号 9 (2012) |
Energy model of а top drive crawler-mounted mover rolling |
|
|
Lopariov A., Sudnitsyn V., Komkin A.
|
| 卷 77, 编号 8 (2010) |
Power parameters of trailed combing adapter |
|
|
Alakin V., Savin V.
|
| 卷 84, 编号 10 (2017) |
Energy analysis of dual-flow hydromechanical gears |
(Rus)
|
|
Sharipov V., Shchetinin Y., Gaev S., Troshkin O.
|
| 卷 88, 编号 1 (2021) |
Energy intensity of chopping fructified raspberry stems |
(Rus)
|
|
Ozherel'yev V.
|
| 卷 80, 编号 8 (2013) |
Power consumption of soil rotary tillage with small-size cutters having driving wheels |
|
|
Kupryashkin V., Naumkin N., Chatkin M.
|
| 卷 78, 编号 10 (2011) |
Power consumption when driving rollers and wheel propellers |
|
|
Zadneprovskiy R.
|
| 卷 76, 编号 6 (2009) |
Energozatraty traktora K-744R v transportnom rezhime |
|
|
Antipin V., Varava V., Karshev G.
|
| 卷 76, 编号 5 (2009) |
Energonasyshchennost' i klassifikatsiya traktorov |
|
|
Kut'kov G.
|
| 卷 77, 编号 10 (2010) |
Energy consumption for the air cleaning in the cab of mobile power vehicle |
|
|
Polivayev O., Sukhinin V.
|
| 卷 79, 编号 10 (2012) |
An energy-saving modular tiller |
|
|
Rudenko N., Lyakhov A., Gerasimov Y., Padaltsin K.
|
| 卷 80, 编号 10 (2013) |
Energy-saving SHF-technology for the preparation of additives set and technical oils on their base |
|
|
Yegorov Y., Kozhevnikov Y., Chizhikov A.
|
| 卷 82, 编号 11 (2015) |
Energy-saving A-hoe blade for tillage |
|
|
Rudenko N., Gorbachev S., Kalugin D., Kayvanov S.
|
| 卷 77, 编号 7 (2010) |
Energy-saving parameters and operating regimes of field machine tools |
|
|
Korshun V.
|
| 卷 77, 编号 4 (2010) |
Energy-saving separator for the grain material cleaning |
|
|
Yampilov S., Tsybenov Z., Tsydypov T.
|
| 卷 92, 编号 3 (2025) |
The energy-force model of destruction of reinforced concrete products by machine working bodies |
|
|
Furmanov D., Krasnobaev T.
|
| 卷 87, 编号 2 (2020) |
Power plants of mobile agricultural machinery using vortex exhaust ejectors |
(Rus)
|
|
Godzhaev Z., Serebryakov R., Kuskov A.
|
| 卷 81, 编号 10 (2014) |
Effective design of protection module for passive safety of cabs |
|
|
Karapetyan M., Orlov N., Kuzmin D.
|
| 卷 81, 编号 6 (2014) |
Effective use of hydrogen power resources in the power supply structure of agroindustrial complex |
|
|
Fomin V.
|
| 卷 83, 编号 11 (2016) |
Effectiveness of protection of mobile power unit cab from direct solar radiation |
(Rus)
|
|
Polivaev O., Zhuravets I., Manoylina S., Teslenko I.
|
| 卷 79, 编号 1 (2012) |
Effectiveness of fuel system protection from contamination during the operation of mobile machines |
|
|
Isayenko V., Isayenko P., Khalturin D.
|
| 卷 88, 编号 6 (2021) |
Efficiency of use of machine and tractor units operating with elastic damping drives of driving wheels |
(Rus)
|
|
Polivaev O., Pilyaev S., Bolotov D.
|
| 卷 77, 编号 3 (2010) |
Effectiveness of use of the mobile electric sets |
|
|
Legeza G., Sapozhnikov I.
|
| 卷 87, 编号 5 (2020) |
Efficiency of a cogeneration plant based on a diesel engine under uneven electrical load conditions |
(Rus)
|
|
Antipov Y., Val'yekho M., Oshchepkov P., Shatalov I., Shatalova I.
|
| 卷 76, 编号 8 (2009) |
Effectiveness of providing wheeled tractors with traction-and-additionally loading device |
|
|
Grebnev V., Vorokhobin A.
|
| 2251 - 2400 的 2423 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 > >> |
