| 期 |
标题 |
文件 |
| 卷 78, 编号 8 (2011) |
An optimal system of resource-saving technologies of cereal crops complex harvesting in the Kuban region |
|
|
Abayev V., Trubilin Y., Maslov G.
|
| 卷 82, 编号 11 (2015) |
Optimal energy saturation of agricultural tractor |
|
|
Samsonov V., Lachuga Y.
|
| 卷 77, 编号 6 (2010) |
Optimal location of gathering and feeding mechanism in the loose hay pickup loader |
|
|
Bobkov S., Astafyev V., Derepaskin A.
|
| 卷 76, 编号 7 (2009) |
Optimal control of parameters of elastic-and-damping towing coupler |
|
|
Gamayunov P., Alekseev S., Gamayunov A.
|
| 卷 77, 编号 12 (2010) |
Optimal and admissible regimes of machine-and-tractor unit operation |
|
|
Kalachin S.
|
| 卷 76, 编号 1 (2009) |
Optimal parameters of drill seed distributor for different depth sowing |
|
|
Shaprov M., Martynov I.
|
| 卷 77, 编号 2 (2010) |
Optimal parameters of tops removing working member of cutter for leaf-and-stalk mass |
|
|
Laryushin N., Laryushin A., Frolov D.
|
| 卷 77, 编号 12 (2010) |
Optimal parameters of drum-type sprinkling machines |
|
|
Kuznetsov P., Bezrodnov N., Konstantinova T., Novikov A.
|
| 卷 79, 编号 1 (2012) |
Optimal operation conditions of cogeneration plants according to the method of golden section |
|
|
Kryaklina I.
|
| 卷 80, 编号 1 (2013) |
Optimal operation modes of a soil-cultivating and sowing unit |
|
|
Akhmadov B., Khodzhiyev B.
|
| 卷 79, 编号 1 (2012) |
The optimal profile of subsurface cultivator hoe |
|
|
Svechnikov P.
|
| 卷 76, 编号 3 (2009) |
Optimization of algorithm of searching place ofthe failure in the measuring expert system of ДВС (internal combustionengine) |
|
|
Dobrolyubov I.
|
| 卷 85, 编号 2 (2018) |
Optimization of the reinforcing layer of the compressor wheel from the composite material of the diesel turbocharger |
(Rus)
|
|
Netrusov A., Fomin V.
|
| 卷 83, 编号 9 (2016) |
Optimization of geometrical parameters of jet drive of cleaning centrifuges |
(Rus)
|
|
Snezhko A., Snezhko V.
|
| 卷 80, 编号 5 (2013) |
Rotor diameter optimization of a soil cultivating machine |
|
|
Gadzhiyev P., Makhmutov M., Dzhabbarov A.
|
| 卷 90, 编号 3 (2023) |
Optimization of design parameters of the vibration protection system of a motor grader seat with quasi-zero stiffness |
|
|
Korytov M., Shcherbakov V., Kashapova I.
|
| 卷 85, 编号 2 (2018) |
Optimization of design parameters of radial tires of propellers of combine harvesters |
(Rus)
|
|
Melikov I.
|
| 卷 77, 编号 8 (2010) |
Optimization of construction of settling vessel for grain cleaning machine |
|
|
Sychugov N., Korneyev S., Sychugov Y., Skorobogatykh V.
|
| 卷 77, 编号 4 (2010) |
Optimization of amplification factor of adaptive friction couplings with differentiated friction pairs |
|
|
Shishkariov M.
|
| 卷 80, 编号 5 (2013) |
Mass optimization of mechanical tester of an automatic driver system of aggregates on narrow-profiled rest-balks |
|
|
Buyashov V., Bukhovets A., Bychkovskiy V., Gorbachiov I.
|
| 卷 77, 编号 12 (2010) |
Optimization of multilevel storage facilities of technical service enterprises for grain and forage combine harvesters |
|
|
Tsariov Y., Ryabykh A.
|
| 卷 91, 编号 3 (2024) |
Optimization of the automotive millimeter-wave radar data processing using the modified MFNN neural network |
|
|
Panokin N., Kostin I., Karlovskiy A.
|
| 卷 89, 编号 2 (2022) |
Optimization of the main parameters of the diesel engine during its operation on the multicomponent biofuel composition |
(Rus)
|
|
Plotnikov S., Kartashevich A., Simonov M., Shipin A.
|
| 卷 79, 编号 9 (2012) |
Parameter optimization of automatic transmission of an industrial tractor |
|
|
Pozin B., Novoselskiy A., Dovzhik Y.
|
| 卷 83, 编号 2 (2016) |
Parameter optimization of a modular diesel exhaust converter for automotive equipment |
(Rus)
|
|
Chernetsov D., Kapustin V.
|
| 卷 77, 编号 12 (2010) |
Optimization of parameters of disk chopping apparatus in the cutting plane |
|
|
Kotov A.
|
| 卷 77, 编号 2 (2010) |
Forest fire extinguishing unit with end mill: optimization of parameters and operational regimes |
|
|
Karnaukhov A., Orlovskyi S.
|
| 卷 76, 编号 7 (2009) |
Optimization of parameters and operation regimes of MTA (machine-and-tractor unit) |
|
|
Kalachin S.
|
| 卷 86, 编号 2 (2019) |
Optimization of parameters and modes of operation of the spiral-screw roller |
(Rus)
|
|
Maslov G., Evglevskij R., Cybulevskij V.
|
| 卷 77, 编号 9 (2010) |
Optimization of parameters and operating modes of apparatus for preparation and feeding whole milk substitute to cattle youngsters |
|
|
Vtoryi V., Mikhaylov A.
|
| 卷 80, 编号 2 (2013) |
Parameter optimization of combined ploughshare of a tree planting machine on the base of physical and mathematical modeling |
|
|
Bartenev I., Shavkov M.
|
| 卷 80, 编号 3 (2013) |
Parameter optimization of a combined system for the reduction of diesels exhaust gases toxicity |
|
|
Chernetsov D., Kapustin V.
|
| 卷 80, 编号 6 (2013) |
Optimization of conicity parameters of anti-slipping device holder |
|
|
Makhmutov M.
|
| 卷 82, 编号 5 (2015) |
Parameter optimization of machine for potato beetles shaking off |
|
|
Chernetsov D., Kapustin V., Kiselev N.
|
| 卷 78, 编号 12 (2011) |
Optimization of fractional thrеshing and separating device's blade parameters |
|
|
Rodimtsev S., Potapov N.
|
| 卷 80, 编号 6 (2013) |
Optimization of parameters of a maize harvester snapping unit |
|
|
Saprykin V.
|
| 卷 91, 编号 6 (2024) |
Optimization of tillage roller parameters based on field research results |
|
|
Proshkin V., Kurdyumov V., Bogatsky R., Proshkin E.
|
| 卷 90, 编号 1 (2023) |
The optimization of parameters of a safety element of the finger mechanism of the header auger of a combine harvester |
|
|
Kotov A.
|
| 卷 78, 编号 3 (2011) |
Optimization of parameters of tractor diesel engine fuel-handling for running on rapeseed oil |
|
|
Kartashevich A., Tovstyka V., Plotnikov S.
|
| 卷 84, 编号 1 (2017) |
OPTIMIZATION OF AUTOMOTIVE TRANSPORT MOVEMENTS INVOLVED IN THE PRODUCTION PROCESS OF LARGE MACHINE-BUILDING ENTERPRISES |
(Rus)
|
|
ROMANOV P., ROMANOVA I.
|
| 卷 83, 编号 6 (2016) |
Optimization of duration of winter wheat harvesting by means of a multifunctional unit |
(Rus)
|
|
Maslov G.
|
| 卷 79, 编号 10 (2012) |
Optimization of wind energy generator regimes |
|
|
Krasnov S., Kryaklina I.
|
| 卷 81, 编号 11 (2014) |
Optimization of grain mass threshing regimes in stationary conditions |
|
|
Polyakov G., Shukhanov S., Boloyev P.
|
| 卷 80, 编号 9 (2013) |
Optimization of machine and tractor aggregate operational modes during technological operations performing |
|
|
Larin N., Polkovnikov N., Polkovnikov R.
|
| 卷 79, 编号 8 (2012) |
Optimization of structure and operation modes of machine-tractor units |
|
|
Kotsar Y., Pluzhnikov S., Golovaschenko G., Kumakov Y., Leonov S.
|
| 卷 82, 编号 8 (2015) |
Optimization of formulation of repair abrasion-resistant dispersion-strengthened epoxy composition with sand filler on the adhesion strength |
|
|
Mikhalchenkov A., Komogortsev V., Filin Y., Mikhalchenkova M.
|
| 卷 80, 编号 7 (2013) |
Optimization of type, composition and structure of combines fleet in Krasnodar Region taking into account the flexible multipurpose aggregates |
|
|
Palapin A.
|
| 卷 84, 编号 11 (2017) |
Optimization of traction characteristics of agricultural tractors |
(Rus)
|
|
Samsonov V., Lachuga Y.
|
| 卷 80, 编号 5 (2013) |
Optimization of the inclination angle of working area of a potato harvester separator |
|
|
Maksimov L., Strunov A., Muratov P., Vasilyev A.
|
| 卷 81, 编号 12 (2014) |
Optimizing the pitch of sole of two-stage B-shaped knives |
|
|
Makhmutov M., Bykovskiy V.
|
| 卷 78, 编号 10 (2011) |
Optimization of operating parameters and modes of tractor according to its traction characteristics |
|
|
Eviyev V., Ochirov N., Ageyev S., Karuyev B.
|
| 卷 82, 编号 11 (2015) |
Optimization of energy parameters of tractor gas-turbine engine |
|
|
Shkrabak V., Dzhabborov N., Shkrabak R., Fedkin D.
|
| 卷 83, 编号 2 (2016) |
Experience and prospects of application of double-drum rotary tillage tools |
(Rus)
|
|
Zvolinskiy V., Mosyakov M., Semichev S.
|
| 卷 78, 编号 7 (2011) |
An experience of familiarizing students with design and research work in the institutes of higher education |
|
|
Maksimov L.
|
| 卷 78, 编号 9 (2011) |
An experience of developing and testing the walking supports for sprinkling machines |
|
|
Briskin Y., Chernyshev V., Zhoga V., Maloletov A.
|
| 卷 78, 编号 4 (2011) |
An experience of creation of agricultural trucks |
|
|
Galkin S.
|
| 卷 76, 编号 2 (2009) |
Experimental-and-field trials of effectiveness of energy-sparing hydraulic drive for forestry tractor |
|
|
Tarasov Y.
|
| 卷 80, 编号 6 (2013) |
Organizational and legal forms of higher schools’ practice and experimental farms and ways of their optimization |
|
|
Mozhayev A.
|
| 卷 82, 编号 7 (2015) |
Organization of research and practice base for training specialists in quality assessment of small-scale mechanization means of 0,2 tractive class |
|
|
Khrulkevich O., Roslavtsev A., Devyanin S., Sapozhnikov I.
|
| 卷 77, 编号 7 (2010) |
Organization of motor transport operation in conditions of large-commodity grain production |
|
|
Pyanov V.
|
| 卷 81, 编号 2 (2014) |
Organization of technical support systems in animal husbandry |
|
|
Kovaliov L., Kovaliov I.
|
| 卷 78, 编号 11 (2011) |
Organization of agricultural technical services at the regional level |
|
|
Ignatyev L., Abdrazakov E.
|
| 卷 80, 编号 10 (2013) |
Foundation of proprietary technical maintenance of agricultural machinery |
|
|
Chepurina Y., Kushnariov S.
|
| 卷 77, 编号 7 (2010) |
Organization committee of «Expopriority'2010» started to work |
|
|
- -.
|
| 卷 81, 编号 9 (2014) |
Special device for application of encrusting solution on corn seeds |
|
|
Kushnir V., Kim N., Shilo I., Romanyuk N., Astrakhan B., Ageychik V., Shmat T.
|
| 卷 78, 编号 5 (2011) |
Approximate power calculation for the rotor drive of tillage machine |
|
|
Nikolayev V.
|
| 卷 82, 编号 4 (2015) |
Irrigated packings for air handling in systems of wheeled and tracked vehicles |
|
|
Mikhaylov V., Sharipova N.
|
| 卷 79, 编号 4 (2012) |
A tool for tillage in areas exposed to water erosion |
|
|
Sokolov N.
|
| 卷 83, 编号 6 (2016) |
Implements for embedding of green manure into the surface soil in organic farming technology |
(Rus)
|
|
Astaf'ev V., Bobkov S., Aleksentsev K.
|
| 卷 83, 编号 8 (2016) |
Mitigation of effect of compacted soil lump |
(Rus)
|
|
Sidorov S., Khoroshenkov V., Mironov D., Luzhnova E.
|
| 卷 78, 编号 11 (2011) |
The bases of agricultural machinery industry development strategy |
|
|
Lipkovich E.
|
| 卷 76, 编号 2 (2009) |
Main dimensions and durability of tractor couplings |
|
|
Karpov D., Chichinadze A., Stcherenkov G.
|
| 卷 80, 编号 2 (2013) |
Basic constructional and operating characteristics of a flotation plant |
|
|
Mukhin V., Kirov Y.
|
| 卷 81, 编号 6 (2014) |
Basic measures allowing to increase the energy efficiency of electric equipment in agroindustrial complex |
|
|
Safonov A.
|
| 卷 86, 编号 2 (2019) |
The main directions of development of domestic snowmobiles |
(Rus)
|
|
D'yakov A., Novikov V., Pozdeev A.
|
| 卷 79, 编号 1 (2012) |
The main design parameters of a compact settling chamber |
|
|
Saitov V., Grigoryev D.
|
| 卷 76, 编号 6 (2009) |
Osnovnye pokazateli effektivnosti s.-kh. transportno-tekhnologicheskikh agregatov po dinamicheskomu pasportu |
|
|
Loparev A., Sudnitsyn V., Novikov K., Bronnikov V.
|
| 卷 79, 编号 12 (2012) |
Basic provisions of the «Machines passability» monograph |
|
|
Ponomariov A.
|
| 卷 79, 编号 7 (2012) |
Fundamental principles of resource saving in crop harvesting technology |
|
|
Maslov G., Palapin A.
|
| 卷 79, 编号 4 (2012) |
Principal trends of development of high-performance potato growing machinery |
|
|
Kolchin N., Byshov N., Borychev S., Uspenskiy I., Rembalovich G.
|
| 卷 78, 编号 12 (2011) |
The main stages of development of domestic harvesters with axial-rotor thrеshing and separating system |
|
|
Gorbachiov I., Shreyder Y.
|
| 卷 76, 编号 10 (2009) |
Founder of teaching about quality control in Russia |
|
|
Komarov Y., Roslavtsev A., Sapozhnikov I.
|
| 卷 83, 编号 8 (2016) |
Basics of safe drying of seeds |
(Rus)
|
|
Golubkovich A.
|
| 卷 80, 编号 9 (2013) |
Bases of identification and modeling of artificial pollutions of operating fluids and oils |
|
|
Baryshev V., Maksakova I., Ibragimova K., Kovaliov I.
|
| 卷 80, 编号 1 (2013) |
Design basis for chain gears with increased gear ratios |
|
|
Khabrat N., Umerov E.
|
| 卷 80, 编号 8 (2013) |
Bases of the theory of mechanical energy functioning in technological machines |
|
|
Korshun V.
|
| 卷 80, 编号 7 (2013) |
Basics of quality management of research and development of piston internal-combustion engine for tractive vehicles |
|
|
Didmanidze O., Legeza G., Sapozhnikov I.
|
| 卷 90, 编号 2 (2023) |
Features of furrow formation with rotary and arrow-headed working bodies |
|
|
Benyukh O., Kravchenko R.
|
| 卷 92, 编号 1 (2025) |
Features of the interaction of potato tubers with the working parts of potato harvesters |
|
|
Bayboboev N., Toshtillayev S., Umirzokov Z.
|
| 卷 79, 编号 6 (2012) |
Features of injection and combustion of rapeseed oil and diesel fuel in modern engines |
|
|
Ryzhov Y., Zhosan A., Kurochkin A.
|
| 卷 84, 编号 1 (2017) |
SPECIAL CHARACTERISTICS OF GLEANER COMBINE HARVESTERS |
(Rus)
|
|
GOL'TYAPIN V.
|
| 卷 82, 编号 12 (2015) |
Features of combined friction in contact patch during cornering of track-type tractor on deforming ground |
|
|
Vyaznikov M.
|
| 卷 79, 编号 1 (2012) |
Features of the combined effect of active and passive tools on the soil |
|
|
Nikolayev V.
|
| 卷 80, 编号 3 (2013) |
Structural features of Polish tractors |
|
|
Goltyapin V.
|
| 卷 78, 编号 11 (2011) |
Design features of fan's working wheel |
|
|
Shukhanov S., Khankhasayev G., Punsukov A.
|
| 卷 77, 编号 10 (2010) |
Features of mechanized harvesting of white cabbage |
|
|
Volf A.
|
| 卷 79, 编号 11 (2012) |
Features of potato tubers separation from plant tops in ascending flow of the pile |
|
|
Maksimov L., Strunov A.
|
| 卷 76, 编号 1 (2009) |
Features of projecting the hopper-store |
|
|
Martynov V.
|
| 卷 89, 编号 3 (2022) |
Peculiarities of stems flattening at two-phase fiber flax harvesting technology |
|
|
Zintsov A., Dobretsov V., Sokolov V.
|
| 卷 79, 编号 10 (2012) |
Features of students training for innovative activities |
|
|
Naumkin N., Shabanov G., Kupryashkin V., Kilmyashkin Y., Lomatkin A., Nuyanzin Y.
|
| 卷 77, 编号 2 (2010) |
Features of presentation of mobile machines characteristics |
|
|
Novikov G.
|
| 卷 80, 编号 11 (2013) |
Features of tractive and coupling properties forecasting for wheeled agricultural tractors |
|
|
Kuznetsov N., Gapich D., Shiryayeva Y.
|
| 卷 80, 编号 4 (2013) |
Features of quality engineering of construction manufacturability of tractive and transport vehicles |
|
|
Didmanidze O., Leonov O., Legeza G., Sapozhnikov I.
|
| 卷 79, 编号 11 (2012) |
Features of designing of a wheel small-sized skidding tractor |
|
|
Voynash S., Voynash A.
|
| 卷 79, 编号 9 (2012) |
Features of operation of motor transport diesel working on ethanol and fuel emulsion |
|
|
Likhanov V., Rossokhin A., Chuprakov A.
|
| 卷 76, 编号 6 (2009) |
Osobennosti raboty gusenichnogo dvizhitelya v oblasti malykh udel'nykh sil tyagi |
|
|
Dobretsov R.
|
| 卷 88, 编号 1 (2021) |
Features of the operation of engine oils in a combined lubrication system “engine-gearbox” |
(Rus)
|
|
Krokhta G., Krum V., Usatykh N., Khomchenko Y.
|
| 卷 82, 编号 8 (2015) |
Features of acceleration of agricultural machine-tractor unit with electric traction |
|
|
Amelchenko P., Zhukovskiy I., Gurskiy N., Klyuchnikov A., Vaschula A.
|
| 卷 78, 编号 9 (2011) |
Features of designing the inertial synchronizer for preselector gear box |
|
|
Sharipov V., Kryuchkov V.
|
| 卷 78, 编号 12 (2011) |
Features of designing the reversing automatic tensioning wedge-belt drive |
|
|
Khabrat N., Umerov E.
|
| 卷 82, 编号 12 (2015) |
Calculation features of cycle of reciprocating internal combustion engine operating on gaseous fuel |
|
|
Gavrilov A., Gots A.
|
| 卷 81, 编号 5 (2014) |
Features of reversal seed drying in a tower dryer |
|
|
Pavlov S., Golubkovich A., Marin R., Dadyko A.
|
| 卷 76, 编号 5 (2009) |
Osobennosti separatsii zernovoy smesi na tsilindricheskom podsevnom reshete s plastinchatym barabanom |
|
|
Strikunov N., Tarasov B., Lekanov S., Pavlov S.
|
| 卷 87, 编号 4 (2020) |
Specifics of certification of agricultural tires with maximum consideration of their operating conditions |
(Rus)
|
|
Goncharenko S., Godzhaev Z., Pryadkin V., Artyomov A., Godzhaev T.
|
| 卷 76, 编号 7 (2009) |
Features of quality management system for plants of AПК (agroindustrial complex) technical service |
|
|
Silina M.
|
| 卷 86, 编号 2 (2019) |
Features of the spectra of loads on the units of mobile agricultural machines in the field when delay in external influences |
(Rus)
|
|
Partko S., Groshev L., Sirotenko A., Vojnash S.
|
| 卷 76, 编号 10 (2009) |
Features of technological process of drum threshing-and-separating system for grain combine harvester |
|
|
Zan'ko N.
|
| 卷 76, 编号 5 (2009) |
Osobennosti tovaroproizvodstva v KFKh i LPKh i sozdanie gruzovykh avtomobiley sel'skokhozyaystvennogo naznacheniya |
|
|
Dzotsenidze T.
|
| 卷 79, 编号 6 (2012) |
Features of tailings removal with a stripping-type combine |
|
|
Ayubov A., Shokarev A.
|
| 卷 83, 编号 1 (2016) |
Features of cold start of 6ЧН 13/11 engine and after start warming-up of engine and transmission unit of T-150K tractor |
(Rus)
|
|
Krokhta G.
|
| 卷 80, 编号 2 (2013) |
Features of motor and tractor internal combustion engines exploitation in conditions of Siberia and Far East acutely continental climate |
|
|
Labarov D., Dumnov S.
|
| 卷 76, 编号 3 (2009) |
Peculiarities of the exploitation of mobile agriculturalmachines by the use of biodiesel fuel |
|
|
Didur V., Nadykto V., Juravel' D., Yudovinskyi V.
|
| 卷 83, 编号 5 (2016) |
Features of operation of STA-5TM replaceable technological superstructure for application of solid mineral fertilizers based on Ural-432065 vehicle chassis |
(Rus)
|
|
Shkel' A., Kozlovskaya M., Dzotsenidze T.
|
| 卷 78, 编号 2 (2011) |
Features of the electronic control for transmission electrohydraulic units |
|
|
Shipilevskiy G.
|
| 卷 79, 编号 3 (2012) |
Features of using diesel power stations and systems with energy storage and current limiters |
|
|
Genin V., Popova M.
|
| 卷 81, 编号 8 (2014) |
Combines’ development: from СК-10 to TORUM-740 |
|
|
Shreyder Y., Gorbachev I.
|
| 卷 91, 编号 2 (2024) |
From the single model to the line-up. The 60th anniversary of the DT-75 tractor. The little-known modifications |
|
|
Kosenko V.
|
| 卷 76, 编号 1 (2009) |
Branch regulation ofcreation, production and use of agricultural machinery |
|
|
Krasnoschekov N., Lipkovich E.
|
| 卷 77, 编号 1 (2010) |
Separation of slice from soil massif by the action of share edge |
|
|
Nikolayev V., Popov D.
|
| 卷 77, 编号 3 (2010) |
Domestic manufacturers against the repeal of agricultural machines and equipment subsidies |
|
|
- -.
|
| 卷 76, 编号 10 (2009) |
An assessment of adequacy of model for nitric oxide formation by combustion of fuel in diesel |
|
|
Kul'chitskyi A., Gots A.
|
| 卷 77, 编号 9 (2010) |
An assessment of amplitude-frequency characteristics of devices for «noncontact» creaming |
|
|
Simdyankin A., Simdyankina Y., Lazutkina S.
|
| 卷 78, 编号 4 (2011) |
The assessment of vibrations of turbochargers bodies with different bearings designs |
|
|
Ivanov D., Fisher A., Vazhenin K., Plekhanov D.
|
| 卷 78, 编号 7 (2011) |
Assessment of vibration strength of crankcase parts of the power unit |
|
|
Nikishin V., Makushin A., Fattakhov D.
|
| 卷 89, 编号 4 (2022) |
Assessment of influence of the Common Rail system high-pressure fuel pump design on regularity of fuel supply to a fuel accumulator |
|
|
Kulmanakov S., Tyutikov S.
|
| 卷 92, 编号 3 (2025) |
Assessment of the influence of the adjustment parameters of the slot seed-feeding device on the probability of seed pinching |
|
|
Nesmiyan A., Dubina K., Troyanovskaya I., Voinash S., Orekhovskaya A.
|
| 卷 84, 编号 5 (2017) |
Evaluation of the effect of fuel unevenness on diesel performance |
(Rus)
|
|
Devyanina A.
|
| 卷 90, 编号 3 (2023) |
Evaluation of the influence of fuel pressure pulsation in the Common Rail system on the economic and environmental performance of a diesel engine |
|
|
Kulmanakov S., Tyutikov S.
|
| 卷 84, 编号 2 (2017) |
DETERMINATION OF DIFFERENT METHODS OF TRACTORS DIESEL ENGINE PRE-START PREPARATION AT ITS STARTING CHARACTERISTICS |
(Rus)
|
|
Bondar V.
|
| 卷 81, 编号 2 (2014) |
Evaluation of the impact of wheel tractor velocity and other factors on its oscillations |
|
|
Zolotarevskaya D.
|
| 卷 79, 编号 1 (2012) |
Assessing the influence of number of metal-ceramic friction disks in the brake assembly on the braking performance |
|
|
Ilyuschenko A., Dmitrovich A., Bagnychev S., Karpyza S., Leshok A.
|
| 卷 81, 编号 9 (2014) |
Estimation of soil compaction by ВТ-150 tractor equipped with different types of caterpillars |
|
|
Revenko V., Kupryunin D., Beynenson V., Fedotkin R., Bely I., Veselov N., Zverev N.
|
| 卷 89, 编号 3 (2022) |
Evaluation of the possibility of using artificial neural networks for self-diagnosis of an internal combustion engine with cylinder deactivation |
|
|
Khimchenko A., Mishchenko N., Savchuk O.
|
| 卷 78, 编号 7 (2011) |
Kriging method in the assessment of clods' presence on soil surface after the moldboard ploughing |
|
|
Maksimov I., Malov A., Maksimov V., Kudryashov A.
|
| 卷 77, 编号 4 (2010) |
An assessment of dynamic factor of metal construction of boom for hydraulic loading manipulators by lifting load from its base |
|
|
Gerasun V., Konyushkov A.
|
| 卷 82, 编号 7 (2015) |
Evaluation of durability of welded joints of agricultural machinery metal structures based on accelerated testing |
|
|
Yerofeyev V., Ignatyev A., Sharafiyev R.
|
| 卷 78, 编号 9 (2011) |
Assessment of smoke opacity and toxicity of tractor diesel engine while working on rapeseed oil |
|
|
Kartashevich A., Tovstyka V., Plotnikov S.
|
| 卷 80, 编号 6 (2013) |
Performance estimation of a straw-chopping unit of combine harvester |
|
|
Yagelskiy M., Rodimtsev S.
|
| 卷 81, 编号 7 (2014) |
Estimation of fuel quality indices based on the investigation of its tribochemical processes and properties |
|
|
Kerimov M., Safiullin R., Marusin A.
|
| 卷 79, 编号 5 (2012) |
Evaluation of elastic shaft dumping ratio for the research of dynamic processes in transmission |
|
|
Chuprynin Y., Kotov A.
|
| 1201 - 1350 的 2423 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 > >> |
