Vol 82, No 9 (2015)
- Year: 2015
- Articles: 16
- URL: https://journals.rcsi.science/0321-4443/issue/view/3649
Articles
Investigation of indicators of combustion process in tractor diesel engine with the use of natural gas and recirculation, methanol and ethanol fuel emulsions
Abstract
In order to determine and optimize the main parameters of tractor diesel engine, the influence of using of compressed natural gas, exhaust gas recirculation, methanol and ethanol fuel emulsions on the indicators of combustion process in diesel engine is investigated.
Traktory i sel hozmashiny. 2015;82(9):3-5
3-5
Design improvement of extruder
Abstract
The article provides a brief overview of the technological process of extrusion technology, its advantages and disadvantages. It describes a number of technical solutions to remove these disadvantages. The proposed solutions are protected by patents.
Traktory i sel hozmashiny. 2015;82(9):6-8
6-8
New compact potato harvester with separator acting in ascending and descending manner
Abstract
A new compact potato harvester of innovative design with separator detaching the potato tubers from soil and plant tops in ascending flow of pile is developed. Design diagram of new machine is described; test conditions and agronomic parameters are given.
Traktory i sel hozmashiny. 2015;82(9):9-11
9-11
11-14
14-18
19-22
Theoretical and experimental researches of working process of mixing and fermenting tank in heating mode
Abstract
Dependences that allow to determine the temperature of nutrient medium in the hopper of mixing and fermenting tank with regard to the design parameters of machine are obtained. Based on the results of experimental research, the observed dependences of change of specific energy consumption are obtained; the optimum parameters of angles of tank wrapping by heat tape and level of tank filling by nutrient medium are determined.
Traktory i sel hozmashiny. 2015;82(9):23-27
23-27
28-29
Increasing soil compacting impact by roller of a combined machine for preplanting cultivation
Abstract
For the purpose of determination of effective design of roller loading device, the researches of its various embodiments are carried out. It is found that maximum roller’s performance is obtained when force created by loading device applies on the opposite side of roller in relation to suspension point of traction bar and when work driver is located vertically.
Traktory i sel hozmashiny. 2015;82(9):30-31
30-31
Substantiation of location of bottom and top edges of seeding slot of device for ridge tillage with simultaneous application of organic mineral fertilizers
Abstract
The article presents the results of researches for substantiation of location of bottom and top edges of seeding slot of a device for ridge tillage with simultaneous application of organic mineral fertilizers for the purpose of technological process execution at required level and prevention of fertilizers’ excess consumption.
Traktory i sel hozmashiny. 2015;82(9):32-33
32-33
Research of stability of tractor with frontand rear-mounted tools against sidewise skidding
Abstract
It is found that for providing the straight line motion of tractor with front- and rear-mounted tools and its stability against sidewise skidding the slope angles of forces acting on tractor from the side of tools to its longitudinal axis must be minimal, and their lateral components must be directed to the opposite sides.
Traktory i sel hozmashiny. 2015;82(9):34-35
34-35
36-41
Development of mechanization means for storages of potatoes and vegetables
Abstract
Features of mechanization of operations in storages of potatoes and vegetables are marked. Design development of domestic hopper store loaders of potatoes and vegetables, their design features, basic parameters and performance measures are described. Suggestions for organization of development and production of loaders are given.
Traktory i sel hozmashiny. 2015;82(9):42-45
42-45
46-49
49-51
Technological and technical requirements for agricultural sprayers
Traktory i sel hozmashiny. 2015;82(9):52
52