Features of operation of STA-5TM replaceable technological superstructure for application of solid mineral fertilizers based on Ural-432065 vehicle chassis


Cite item

Full Text

Abstract

The development of Ural-432065 specialized all-wheel vehicle chassis with STA-5TM replaceable technological superstructure for application of solid mineral fertilizers complies with the agrotechnical, safe operation and maintenance requirements. Safety requirements and warning descriptions are reflected in the service manual in both text and graphical forms. It is important to study this manual before starting. The relevant symbols are represented on the equipment in locations of working organs and servo units. The Ural-432065 chassis with STA-5TM replaceable technological superstructure is intended for agricultural and municipal works, such as application of dry granulated fertilizers and spreading of earth-moist lime, sand, broken stone, salt and mixtures. General view of the STA-5TM superstructure, its specification, composition, principle of operation, operator control, hydraulic circuit description, electrical schematic diagram, features of operation and service are presented. Amount of fertilizer is controlled by the principal slide gate. Under transportation mode, the slide gate should be occluded. Distribution of granular fertilizers is carried out by the spreading discs. Distributing width is 10-36 m. The adjustment is made on the basis of table of application rate or by means of passing of measuring distance, taking into account the grain size, volume weight, surface structure and moisture. Operation of the STA-5TM replaceable technological superstructure for application of solid mineral fertilizers based on Ural-432065 vehicle chassis is provided by the performance and technology standards, regulated by relevant documents, available and handy to the operator. Design capabilities and used constituent parts allow to increase the operating efficiency as a part of technological complexes with rise in labor productivity.

About the authors

A. S Shkel'

Moscow Technological University

Email: shkel-as@yandex.ru
PhD in Engineering Moscow, Russia

M. A Kozlovskaya

Russian State Agrarian University - Moscow K.A. Timiryazev Agricultural Academy

PhD in Engineering Moscow, Russia

T. D Dzotsenidze

Russian State Agrarian University - Moscow K.A. Timiryazev Agricultural Academy

Email: dtengiz@yandex.ru
DSc in Engineering Moscow, Russia

References

  1. Галкин С.Н., Дзоценидзе Т.Д., Левшин А.Г. и др. Агротехнические и технологические параметры автомобилей с.-х. назначения // Тракторы и сельхозмашины. 2011, №5. С. 3-6.
  2. Дзоценидзе Т.Д., Галкин С.Н., Левшин А.Г. и др. Специализированный автомобильный транспорт сельскохозяйственного назначения: Монография. М.: ООО «НИИКА», Металлургиздат, 2013. 368 с.
  3. Измайлов А.Ю., Евтюшенков Н.Е., Дзоценидзе Т.Д. и др. Инновационное развитие транспортной сферы агропромышленного комплекса. М.: ВИМ, 2011. 232 с.
  4. Дзоценидзе Т.Д., Галкин С.Н., Левшин А.Г. и др. К вопросу о создании технологических адаптеров сельскохозяйственного назначения на шасси автомобиля Урал-432065 // Технология колесных и гусеничных машин - Technology of wheeled and tracked machines. 2012, №3. С. 30-38.
  5. Dzotsenidze T.D., Zagarin D.A., Kozlovskaya M.A. Use of profiled tubes to create three-dimensional frame-and-panel systems for tractors and automobiles // Metallurgist. November 2014, vol. 58, iss. 7-8, pp. 717-723. doi: 10.1007/s11015-014-9983-2.
  6. Шкель А.С., Загарин Д.А., Козловская М.А. и др. Пространственные несущие системы каркасной схемы для технологических надстроек сельскохозяйственного назначения // Тракторы и сельхозмашины. 2016, №4. С. 19-23.
  7. Шкель А.С., Загарин Д.А., Козловская М.А. и др. Новое семейство технологических надстроек для АПК на базе специализированного автомобиля сельскохозяйственного назначения // Технология колесных и гусеничных машин - Technology of wheeled and tracked machines. 2015, №6. С. 12-19.
  8. Шкель А.С. Анализ отечественного и зарубежного опыта применения сменных технологических надстроек на базе шасси грузовых автомобилей сельскохозяйственного назначения // Труды НАМИ. 2016, №264. С. 117-131.
  9. Дзоценидзе Т.Д., Левшин А.Г., Измайлов А.Ю. и др. Создание новой линейки специализированного автомобильного транспорта сельскохозяйственного назначения // Технология колесных и гусеничных машин - Technology of wheeled and tracked machines. 2012, №1. С. 29-35.
  10. Галкин С.Н., Ведерников А.А. Разработка опытного образца автомобиля Урал-432091 сельскохозяйственного назначения с колесной формулой 4х4 и грузоподъемностью 5..6 т // Технология колесных и гусеничных машин - Technology of wheeled and tracked machines. 2012, №1. С. 35-41.

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2016 Shkel' A.S., Kozlovskaya M.A., Dzotsenidze T.D.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
 


Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).