| Edição |
Título |
Arquivo |
| Volume 32, Nº 2 (2022) |
“Gradient” Experiment in Horticulture Lighting |
(Rus)
|
|
Rakutko S., Rakutko E.
|
| Volume 35, Nº 2 (2025) |
Combination of Evolutionary Algorithms and Direct Search Approaches for Improving the Dynamic Performance of Grid Connected Solar Power System |
(Eng)
|
|
Verma A., Tiwari P., Sharma D.
|
| Volume 34, Nº 3 (2024) |
Flow structure and periodic processes in a disc-shaped vortex chamber of a hydrodynamic cavitator |
(Rus)
|
|
Ivanov E., Vorotnikov I., Pasin A., Sedov A., Oshurkov M.
|
| Volume 30, Nº 2 (2020) |
Development of the Functional and Management Structure for the Computerized Management System under the Influence of Direct Environment Factors |
(Eng)
|
|
Al Besoul K., Al Salaimeh S., Al Halaybeh A., Hajiyev N.
|
| Volume 32, Nº 3 (2022) |
Flow Boiling Heat Transfer of Grooved Copper Foam with Open Gap |
(Eng)
|
|
Donghui Z., Lili S., Jijin M., Qinhui L., Daifen C., Levtsev A.
|
| Volume 33, Nº 1 (2023) |
Harrow with Turning Disc Section |
(Eng)
|
|
Troyanovskaya I., Tarasenko B., Kuzmin V., Partko S., Voinash S.
|
| Volume 34, Nº 2 (2024) |
Identification of defects in products made from honeycomb composite materials using infrared scanning thermography |
(Eng)
|
|
Golovin D., Divin A., Samodurov A., Zaharov Y., Tyurin A., Golovin Y.
|
| Volume 29, Nº 1 (2019) |
Inverse Optimum Safety Factor Method for Reliability-Based Topology Optimization Applied to Free Vibrated Structures |
(Eng)
|
|
Kharmanda G., Antypas I., Dyachenko A.
|
| Volume 34, Nº 2 (2024) |
Justification of dual-level opener parameters in digital twin by the discrete element method |
(Eng)
|
|
Mudarisov S., Farkhutdinov I., Bagautdinov R.
|
| Volume 31, Nº 1 (2021) |
Light and Temperature Control for Greenhouse Plant Growth |
(Eng)
|
|
Sheryazov S., Popova S.
|
| Volume 35, Nº 3 (2025) |
Performance Studies of Photovoltaic Air Collector with Aluminum Foam Fins |
(Eng)
|
|
Elmnifi M., Duyun T.
|
| Volume 31, Nº 3 (2021) |
Possibilities of Obtaining Biogas from Manure and Amaranth |
(Eng)
|
|
Karaeva J., Timofeeva S.
|
| Volume 33, Nº 4 (2023) |
Power Analysis of Toroidal Core Electromagnetic Energy Harvesters for Transmission Lines |
(Eng)
|
|
Balci M., Dalcali A.
|
| Volume 30, Nº 3 (2020) |
Reliability-Based Topology Optimization Using Two Alternative Inverse Optimum Safety Factor Approaches: Application to Bridge Structures |
(Eng)
|
|
Kharmanda G., Antypas I., Dyachenko A.
|
| Volume 30, Nº 2 (2020) |
Simulation of Sesame Seeds Outflow in Oscillating Seed Metering Device Using DEM |
(Eng)
|
|
Sharaby N., Butovchenko A., Doroshenko A.
|
| Volume 32, Nº 4 (2022) |
Studying the Thermophysical Characteristics of the Muscle Mass of the Black Soldier Fly Larvaes (Hermetia Illucens) as a Drying Object |
(Eng)
|
|
Doroshenko V., Khozyaev I., Yakovlev D., Doroshenko A., Shcherbakov A.
|
| Volume 35, Nº 1 (2025) |
Technology for Adjusting Working Tools of a Rotary Harvester Based on Fuzzy Modelling |
(Eng)
|
|
Dimitrov V., Nurutdinova I., Borisova L., Papchenko A.
|
| Volume 29, Nº 3 (2019) |
The Effect of Reliability Index Values on Resulting Reliability-Based Topology Optimization Configurations: Numerical Validation by Shape
Optimization |
(Eng)
|
|
Kharmanda G., Antypas I., Dyachenko A.
|
| Volume 32, Nº 2 (2022) |
The Influence of Gluten-Free Flour on Bakery Dough Quality |
(Eng)
|
|
Merker A., Reva E., Serdyuk V.
|
| Volume 34, Nº 1 (2024) |
Using Laser Point Scanning Thermography for Quality Monitoring of Products Made of Composite Materials |
(Eng)
|
|
Divin A., Karpov S., Zakharov Y., Karpova N., Samodurov A., Golovin D., Tyurin A.
|
| Volume 29, Nº 3 (2019) |
Automation of Obtaining Parts Parameters for Tasks of Design-Technological Parametrization |
(Rus)
|
|
Shchekin A.
|
| Volume 32, Nº 3 (2022) |
Automated Train Coordinate Determination System with Self-Tuning of the Decision Function |
(Rus)
|
|
Tarasov E., Tarasova A.
|
| Volume 35, Nº 1 (2025) |
Agro Cross-Country Ability of Combine Harvesters with Driving Wheels Equipped with Different Tires |
(Rus)
|
|
Kravchenko L., Kravchenko V., Zhurba V., Melikov I.
|
| Volume 31, Nº 1 (2021) |
Agrotechnical and Energy Performance of Tillage Tools |
(Rus)
|
|
Bozhko I., Parkhomenko G., Kambulov S., Pakhomov V.
|
| Volume 29, Nº 3 (2019) |
Adaptive Iterative Control of Temperature in Greenhouse |
(Rus)
|
|
Grudinin V., Khoroshavin V., Zotov A., Grudinin S.
|
| Volume 34, Nº 4 (2024) |
Additive Technologies for Production and Repair of Agricultural Equipment |
(Rus)
|
|
Senin P., Chatkin M., Kilmyashkin E.
|
| Volume 33, Nº 2 (2023) |
Algorithm for Evaluation of the Molecular Characteristics of a Polymer Product under Conditions of Multipoint Control |
(Rus)
|
|
Miftakhov E., Mustafina S., Nasyrov I., Morozkin N.
|
| Volume 34, Nº 4 (2024) |
Algorithm for Searching the Optimal Regulator Supply Mode in the Process of Manufacturing Polymer Products |
(Rus)
|
|
Miftakhov E.
|
| Volume 32, Nº 3 (2022) |
Algorithm for Solving the Problem of Optimal Control of a Chemical-Technological Process with Terminal Constraints |
(Rus)
|
|
Antipina E., Mustafina S., Antipin A., Morozkin N.
|
| Volume 29, Nº 4 (2019) |
Analysis of Work Parameters of the Device for Hydraulic Removal of Weed Vegetation |
(Rus)
|
|
Khort D., Izmaylov A., Smirnov I., Filippov R., Kutyrev A.
|
| Volume 35, Nº 2 (2025) |
Analyzing the Process of Formation and Retaining of Straightness of Flax Stem Strips during Flax Harvesting |
(Rus)
|
|
Zintsov A., Kovalev M., Perov G.
|
| Volume 29, Nº 3 (2019) |
Analysis of Energy Consumption during Plowing Using a Motor-Block with Moldboard Plow |
(Rus)
|
|
Kupryashkin V., Ulanov A., Naumkin N., Bezrukov A., Shlyapnikov M.
|
| Volume 33, Nº 2 (2023) |
Analysis of Manure Separation Technology Efficiency into Fractions Followed by Liquid Fraction Rectification |
(Rus)
|
|
Shalavina E., Vasilev E., Papushin E.
|
| Volume 29, Nº 3 (2019) |
Barothermal Processing of Animal Feed Ingredients |
(Rus)
|
|
Syrovatka V., Zhdanova N., Rasskazov A., Toropov D.
|
| Volume 32, Nº 1 (2022) |
Safety of Automated Technologies for Regulating the Reclamation Regime of Agroecosystem |
(Rus)
|
|
Yurchenko I.
|
| Volume 30, Nº 2 (2020) |
Rapid Estimation of the Entropy of Long Codes with Dependent Bits on Low-Power, Low-Bit Microcontrollers (Review of Literature on Reducing the Dimension of a Problem) |
(Rus)
|
|
Ivanov A., Bannykh A.
|
| Volume 32, Nº 1 (2022) |
Probabilistic Model of the Kinematics of the Device for Reducing Elongation of Flax Fiber Stems in the Tape |
(Rus)
|
|
Zintsov A., Kovalev M., Perov G.
|
| Volume 30, Nº 2 (2020) |
The Effect of Humic Aerosol Treatment on Grain Seeds Quality |
(Rus)
|
|
Teterina O., Teterin V., Mitrofanov S., Kostenko M., Rembalovich G., Novikov N.
|
| Volume 35, Nº 1 (2025) |
The Effect of Air Pressure on the Technological Process of Grinding in the Grain Hammer Mill |
(Rus)
|
|
Savinykh P., Turubanov N., Aleshkin A., Suhlyaev V.
|
| Volume 33, Nº 1 (2023) |
Influence of Suction Hole Diameter of Precision Seed Machine on the Characteristics of Feeding Corn and Sunflower Seeds |
(Rus)
|
|
Nesmiyan A., Dubina K., Zhigailova A.
|
| Volume 31, Nº 3 (2021) |
Effect of Chromium Addition and Regimes during Electrospark Alloying with Aluminum Matrix Anode
Material of Steel 45 |
(Rus)
|
|
Velichko S., Nikolenko S., Konevtsov L., Gordienko P., Panin E.
|
| Volume 33, Nº 3 (2023) |
Influence of Hydraulic Oil Brands on the Completeness and Accuracy of Diagnostics
of Hydraulic Units of Russian and Foreign Production |
(Rus)
|
|
Zemskov A., Ionov P., Senin P., Pyanzov S., Salmin V.
|
| Volume 34, Nº 3 (2024) |
Micro-bending effect on the field and energy of weakly guiding optical fiber with a gradient profile in single-mode regime |
(Rus)
|
|
Gladkikh V., Vlasenko V.
|
| Volume 33, Nº 4 (2023) |
Influence of the Processes of Fluffing the Flax Stem Strips on the Structural Parameters of the Layer |
(Rus)
|
|
Zintsov A., Kovalev M., Perov G., Perov M., Dobretsov V.
|
| Volume 34, Nº 4 (2024) |
Effect of Animal and Poultry Manure Processing Technologies on Greenhouse Gas Emissions |
(Rus)
|
|
Briukhanov A., Romanovskaya A., Shalavina E., Vasilev E., Vertyankina V.
|
| Volume 34, Nº 1 (2024) |
Influence of the Grid Inclination Angle on the Efficiency of Preliminary Separation of the Combed Heap |
(Rus)
|
|
Nikitin V., Ozherelev V.
|
| Volume 31, Nº 1 (2021) |
Assessment of Winter Wheat Plant Development during the Seeding and Tillering Stages According to the Earth Remote Sensing Data |
(Rus)
|
|
Storchak I., Eroshenko F., Oganyan L., Shestakova E., Kalashnikova A.
|
| Volume 30, Nº 1 (2020) |
Selecting a Strategy for Determining the Combine Harvester Parameter Settings |
(Rus)
|
|
Dimitrov V., Borisova L., Nurutdinova I., Tugengold A.
|
| Volume 32, Nº 2 (2022) |
Dynamics of Fractional Composition of Grain-and-Straw Mass Being Threshed in the Threshing Mechanism of a Combine Harvester |
(Rus)
|
|
Zhalnin E., Chaplygin M.
|
| Volume 35, Nº 3 (2025) |
Distribution Law of Corrosion of Agricultural Machinery Components under the Influence of Salt Spray |
(Rus)
|
|
Limarenko N., Savenkov D., Gladkih D., Shcherbakov A.
|
| Volume 33, Nº 4 (2023) |
Patterns of Influence of Winter Wheat Sowing Density on Its Yield |
(Rus)
|
|
Chaplygin M., Zhalnin E., Shibryaeva L., Podzorov A.
|
| Volume 34, Nº 2 (2024) |
Probing alternative fuel compositions to determine electrical parameters |
(Rus)
|
|
Plotnikov S., Gnevashev P., Shishkin G., Kartashevich A.
|
| Volume 30, Nº 4 (2020) |
Manufacturing Parts for Hydraulic Systems of Agricultural Machinery under Conditions of Ultrasonic Cutting |
(Rus)
|
|
Skryabin V.
|
| Volume 29, Nº 2 (2019) |
Changing the Contact Wetting Angles when Adding Surface-Active Substances to Washing Solutions |
(Rus)
|
|
Byshov N., Uspensky I., Alekseev V., Fadeev I.
|
| Volume 32, Nº 3 (2022) |
Change of Spectral Photoluminescent Properties of Milk during Souring |
(Rus)
|
|
Belyakov M., Samarin G., Kudryavtsev A., Efremenkov I.
|
| Volume 34, Nº 4 (2024) |
Wear Resistance of Nickel Composite Coatings with Micron-Sized and Submicron-Sized Particles of SiC |
(Rus)
|
|
Zhachkin S., Trifonov G., Sidorkin O., Pustovetov A.
|
| Volume 31, Nº 4 (2021) |
Integrated Mobile Robotic Platform Model |
(Rus)
|
|
Chugunov M., Polunina I., Divin A., Generalova A., Nikulin A., Bychkov D.
|
| Volume 35, Nº 3 (2025) |
Intelligent Assessment of Wheat Yield through the Variable Potential of Seeds |
(Rus)
|
|
Pronin S., Zryumova A., Piletsky A., Belyaev V.
|
| Volume 30, Nº 3 (2020) |
Intelligent Control Systems for Dynamic Mixing Processes in Seed Processing Machines with Highly Elastic Working Bodies |
(Rus)
|
|
Sukhanova M., Sukhanov A., Voinash S.
|
| Volume 31, Nº 2 (2021) |
The Information Predictive Model of Creating Temperature and Humidity Conditions in Cow Barns |
(Rus)
|
|
Vtoryi V., Vtoryi S., Gordeev V.
|
| Volume 33, Nº 1 (2023) |
The Use of Disk-Shaped Diaphragm of Vehicles in Double-Circuit Diaphragm Pumps |
(Rus)
|
|
Levtsev A., Lapin E., Daifen C.
|
| Volume 34, Nº 4 (2024) |
Investigation of the Effect of the Homogenization Regime on Energy Costs and Shelf Life of Yogurt with Dogberry Puree |
(Rus)
|
|
Gerber Y., Kalinovskaya T., Gavrilov A., Kiyan N.
|
| Volume 33, Nº 3 (2023) |
Investigating the Influence of the Belt IR Dryer Regime Parameters on Kinetics of Carrot Drying Process |
(Rus)
|
|
Gavrilov A., Gerber Y.
|
| Volume 30, Nº 4 (2020) |
Studying the Influence of the Technical Performance Complexity and the Nomenclature and Quantitative Composition of Agricultural Machinery on Its Recyclability Rate |
(Rus)
|
|
Kravchenko I., Migachev Y., Kuznetsov Y., Davydkin A., Erofeev M.
|
| Volume 29, Nº 4 (2019) |
Study of Master Plans of Technical Service Enterprises in Agricultural Sector |
(Rus)
|
|
Komarov V., Salmin V., Kurashkin M.
|
| Volume 34, Nº 1 (2024) |
Study of Potato Tuber Motion on the Elevator with a Separation Intensifier |
(Rus)
|
|
Gadzhiev P., Uspenskiy I., Yukhin I., Ramazanova G., Gadzhiev I.
|
| Volume 33, Nº 4 (2023) |
Study of Changes in the Amino Acid Composition of Spiked Cereals during the Ripening Process |
(Rus)
|
|
Lachuga Y., Meskhi B., Pakhomov V., Rudoy D., Kambulov S., Maltseva T.
|
| Volume 34, Nº 4 (2024) |
Study of Induction Heating of Metal Structures at Increased Frequency |
(Rus)
|
|
Chepelev Y., Ermolenko D., Yuferev L., Roshchin O.
|
| Volume 32, Nº 3 (2022) |
Studying the Innovative Flax Pulling Process in Apparatuses with Transverse Pulling Channels |
(Rus)
|
|
Rostovtsev R., Kovalev M., Perov G., Prosolov S.
|
| Volume 31, Nº 3 (2021) |
Study of a Stripper Header for Grain Harvesting as a Vibrating System |
(Rus)
|
|
Savin V.
|
| Volume 29, Nº 2 (2019) |
Investigation of Grain Movement Parameters in the Liquid of the Device for Removing Ergot |
(Rus)
|
|
Sysuev V., Saitov V., Farafonov V., Saitov A.
|
| Volume 31, Nº 3 (2021) |
Studying Grain Flow Immersion into Liquids of Various Densities Based on the Methods of Experiment Design |
(Rus)
|
|
Saitov A., Sysuev V., Saitov V.
|
| Volume 32, Nº 4 (2022) |
Investigation of Field and Energy in a Weakly-Conducting Optical Fiber with an Arbitrary Degree of Refractive Index Profile |
(Rus)
|
|
Vlasenko V., Gladkikh V.
|
| Volume 34, Nº 3 (2024) |
The study of the process of supplying seeds of row crops using a vacuum seed-placing unit |
(Rus)
|
|
Nesmiyan A., Dubina K., Butenko A., Zhigailova A., Voinash S., Orekhovskaya A.
|
| Volume 31, Nº 2 (2021) |
Studying the Normal Operation of Grain Harvesters within the Warranty Period |
(Rus)
|
|
Komarov V., Kurashkin M.
|
| Volume 33, Nº 1 (2023) |
The Study of Compositions and Methods of Supplying New Fuels with Additives of Brassica Rapa Oil to the Diesel |
(Rus)
|
|
Plotnikov S., Kartashevich A., Zabolotskikh G.
|
| Volume 34, Nº 4 (2024) |
Investigating the Soil Hardness on Personal Subsidiary and Individual Peasant Farms |
(Rus)
|
|
Ulanov A., Kupryashkin V., Naumkin N., Naumkin D.
|
| Volume 30, Nº 1 (2020) |
Physical Methods for Studying Jades of Different Colors |
(Rus)
|
|
Shelekhov I., Shishelova T., Smirnov E.
|
| Volume 34, Nº 3 (2024) |
Investigating the characteristics of injecting and spraying methanol-containing fuel in a diesel engine |
(Rus)
|
|
Likhanov V., Lopatin O.
|
| Volume 35, Nº 3 (2025) |
Study of Greenhouse Gas Emission from Young Cattle Manure Processing |
(Rus)
|
|
Briukhanov A., Vasilev E., Bazykin V., Shalavina E.
|
| Volume 32, Nº 2 (2022) |
Research and Comparative Testing of a Grain Flattener with a Feeding Device |
(Rus)
|
|
Savinykh P., Sysuev V., Kazakov V., Sychugov Y.
|
| Volume 34, Nº 2 (2024) |
Computer simulation of a digital system of automatic light control |
(Rus)
|
|
Shabaev E., Romanovets M.
|
| Volume 33, Nº 4 (2023) |
Counterfactual Analysis of the Efficiency of Decontamination of Livestock Production Organic Wastes |
(Rus)
|
|
Lobachevsky Y., Shemyakin A., Limarenko N., Uspensky I., Yukhin I.
|
| Volume 30, Nº 3 (2020) |
Conceptual Model of Energy Efficiency for Environmentally Safe Utilization of Liquid Pig Manure |
(Rus)
|
|
Byshov N., Uspenskiy I., Yukhin I., Chatkin M., Limarenko N.
|
| Volume 35, Nº 2 (2025) |
Conceptual Basis for Developing Electric Plot Combine Harvester with Combined Power-Generating Plant |
(Rus)
|
|
Chaplygin M., Starostin I., Ovcharenko A.
|
| Volume 34, Nº 3 (2024) |
Critical parameters of the athermal electroplastic effect in metallic materials |
(Rus)
|
|
Stolyarov V.
|
| Volume 29, Nº 1 (2019) |
Mathematical Models and Evaluation Software for Stress-Strain State of the Earth’s Lithosphere |
(Rus)
|
|
Faddeev A., Pavlova S., Nevdakh T.
|
| Volume 29, Nº 4 (2019) |
Mathematical Modeling of Main Classes of Stochastic Productive Systems |
(Rus)
|
|
Butov A., Volkov M., Golovanov V., Kovalenko A., Kostishko B., Samoilov L.
|
| Volume 29, Nº 3 (2019) |
Method of Determining Seed Germination by Using Membrane Potential of Wheat Seeds |
(Rus)
|
|
Barysheva N., Pronin S.
|
| Volume 32, Nº 4 (2022) |
Method for Determining the Initial Values of the Adjustable Parameters of the Combine Harvester Cutting Unit |
(Rus)
|
|
Dimitrov V., Borisova L., Nurutdinova I.
|
| Volume 29, Nº 1 (2019) |
Method to Determine the Efficiency Assessment Indicators of Potato Treatment by the Aerodynamic Method |
(Rus)
|
|
Dzhabborov N., Zakharov A., Zykov A.
|
| Volume 29, Nº 2 (2019) |
The Multiplication Method with Scaling the Result for High-Precision Residue Positional Interval Logarithmic Computations |
(Rus)
|
|
Korzhavina A., Knyazkov V.
|
| Volume 29, Nº 1 (2019) |
The Principles for Determining Recycling Fee on Decommissioned Equipment |
(Rus)
|
|
Ignatov V., Dorokhov A., Gerasimov V., Denisov V.
|
| Volume 29, Nº 2 (2019) |
The Method of Calculating Cut Length for Flail and Double Chop Forage Harvesters |
(Rus)
|
|
Belov M.
|
| Volume 32, Nº 1 (2022) |
Calculation Methods of Total Nitrogen and Total Phosphorus Distribution in Pig Manure Fractions |
(Rus)
|
|
Vasilev E., Shalavina E., Uvarov, R.
|
| Volume 32, Nº 4 (2022) |
Methodological Basis for Designing Tillage Cutters |
(Rus)
|
|
Bezrukov A., Naumkin N., Kupryashkin V., Kupryashkin V.
|
| Volume 32, Nº 1 (2022) |
Methods of Pretreating Raw Materials Containing Organic Compounds before Anaerobic Digestion |
(Rus)
|
|
Palvinskiy V., Vasilev F., Evteev V.
|
| Volume 31, Nº 1 (2021) |
Modeling the Effect of Fertilizers on the Dynamics of Moisture Contours at Drip Irrigation |
(Rus)
|
|
Fadeev I., Uspensky I., Alekseev V., Filippov V.
|
| Volume 31, Nº 1 (2021) |
Modeling Movement of Supports of Walking Machines with Dynamic Stability by Using a Stand |
(Rus)
|
|
Aleynikov Y., Didmanidze O.
|
| Volume 30, Nº 1 (2020) |
Modeling the Flow of Multicomponent Reactive Gas on Unstructured Grids |
(Rus)
|
|
Zhalnin R., Masyagin V., Peskova E., Tishkin V.
|
| 1 - 100 de 248 resultados |
1 2 3 > >> |
