| Issue |
Title |
File |
| Vol 6, No 2-1 (2012) |
Experimental estimate of tractive ability of belt drives with different methods of belt tensioning |
(Rus)
|
|
Balovnev N.P., Dmitrieva L.A., Semin I.N.
|
| Vol 6, No 2-1 (2012) |
Study of stability and controllability of hybrid car with variable-in-motion drive |
(Rus)
|
|
Baulina E.E., Dementyev Y.V., Iturralde P., Kislov A.A.
|
| Vol 6, No 2-1 (2012) |
Prospects medium-tonnage urban commercial vehicles with hybrid power plant with Russian-made tractive electrical equipment |
(Rus)
|
|
Bakhmutov S.V., Serebryakov V.V., Baulina E.E., Kulikov A.I., Filonov A.I.
|
| Vol 6, No 2-1 (2012) |
Method of forecasting of fatigue durability in the conditions of quasimonotonous degradation of physico-mechanical properties of an object |
(Rus)
|
|
Borovskikh V.E., Podvoyskiy A.O.
|
| Vol 6, No 2-1 (2012) |
Modeling of the device for balancing of a Li-Ion battery with switched capacitors for electric vehicles |
(Rus)
|
|
Varlamov D.O.
|
| Vol 6, No 2-1 (2012) |
Approximate method for calculating of internal combustion engine intake noise |
(Rus)
|
|
Vakhitov Y.R., Zagayko S.A.
|
| Vol 6, No 2-1 (2012) |
Development of a system of two-stage turbocharging for KAMAZ EURO-5 engines |
(Rus)
|
|
Kaminskiy V.N., Grigorov I.N., Kaminskiy R.V., Sibiryakov S.V., Kuchev S.M., Likhachev V.N.
|
| Vol 6, No 2-1 (2012) |
Development and production of turbochargers and other engine components and systems using information technologies |
(Rus)
|
|
Kaminskiy V.N., Kaminskiy R.V., Gusak A.A., Sibiryakov S.V., Korneev S.A., Kovaltsov I.V., Sergeev A.S., Ishchenko N.V., Olisova T.A.
|
| Vol 6, No 2-1 (2012) |
Turbo-electric compressor: potential, design and prospects |
(Rus)
|
|
Kaminskiy V.N., Lazarev A.V., Kaminskiy R.V., Sibiryakov S.V.
|
| Vol 6, No 2-1 (2012) |
Comparative analysis of series and combined options of control of a hydrostatic transmission of all-wheel drive wheeled vehicle |
(Rus)
|
|
Lepeshkin A.V.
|
| Vol 6, No 2-1 (2012) |
Analytical method of estimating the results of interaction of elastic wheel with deformable bearing surface in the sustained straight rolling motion |
(Rus)
|
|
Lepeshkin A.V., Petrov S.E.
|
| Vol 6, No 2-1 (2012) |
The fuel pump of a new generation |
(Rus)
|
|
Maksimov Y.V., Sokovikov V.K., Bekaev A.A., Strokov P.I.
|
| Vol 6, No 2-1 (2012) |
Moment theory of wedge |
(Rus)
|
|
Martinov V.K., Zverev A.I.
|
| Vol 6, No 2-1 (2012) |
Development of the V-belt transmission theory |
(Rus)
|
|
Martinov V.K., Zverev A.I.
|
| Vol 6, No 2-1 (2012) |
Modern trends in car security systems development |
(Rus)
|
|
Medelec N.A.
|
| Vol 6, No 2-1 (2012) |
Information and energy converters for control systems |
(Rus)
|
|
Melnikov A.A.
|
| Vol 6, No 2-1 (2012) |
Determination of compliance of an object of development with the level of modern technology. |
(Rus)
|
|
Melnikov A.A.
|
| Vol 6, No 2-1 (2012) |
Methods of creating an "intelligent" automatic adaptive transmission control multidrive wheeled vehicle |
(Rus)
|
|
Lepeshkin A.V.
|
| Vol 6, No 2-1 (2012) |
Optimal control theory solutions for investigation of a hybrid electric vehicle’s powertrain |
(Rus)
|
|
Kulikov I.A.
|
| Vol 6, No 2-1 (2012) |
Numerical and experimental stufy of composite ceramic armor resistance when exposed to high-speed bullets and fragments |
(Rus)
|
|
Kulakov N.A., Lyubin A.N., Skakbaeva A.S.
|
| Vol 6, No 2-1 (2012) |
Information search for identifying of the trends in the motor engineering development for a specific region (Kazakhstan) |
(Rus)
|
|
Kim V.V., Kaminskiy V.N.
|
| Vol 6, No 2-1 (2012) |
Application of active wheel modules in articulated trucks for transportation of oversized and heavy cargo |
(Rus)
|
|
Korkin S.N., Kurmaev R.K., Kramer A.S.
|
| Vol 6, No 2-1 (2012) |
Investigation of the heat transfer process in a mesh matrix of a rotary heat exchanger |
(Rus)
|
|
Alexeev R.A., Kostyukov A.V.
|
| Vol 6, No 2-1 (2012) |
Investigation of combustion modes of energy-accumulating materials |
(Rus)
|
|
Kostykov A.V., Kuznetsov V.V., Ashcheulnikov E.K., Rodkin K.P.
|
| Vol 6, No 2-1 (2012) |
Microturbine with efficiency of over 43% |
(Rus)
|
|
Kostykov A.V.
|
| Vol 6, No 2-1 (2012) |
The comparative evalution of the vibration damping characteristics of materials for modification of an oil pan and valve covers of an engine |
(Rus)
|
|
Kruglov K.M., Sherbakov V.I.
|
| Vol 6, No 2-1 (2012) |
Development of a mathematical model of an energy-absorbing seat, using the results of piling tests |
(Rus)
|
|
Kulakov N.A., Gavrilov E.V.
|
| Vol 6, No 2-1 (2012) |
Evaluation of explosive impact of mines on structures and crews of armored vehicles. Damaging Effects. Methods of protection |
(Rus)
|
|
Kulakov N.A., Shevchenko A.A.
|
| Vol 6, No 1 (2012) |
QUALITY MANAGEMENT OF TECHNICAL PRODUCTS ON THE STAGES OF DEVELOPMENT |
(Rus)
|
|
Martishkin V.V.
|
| Vol 6, No 1 (2012) |
STUDY OF FINE STRUCTURE OF INFRASOUND AND ELECTROMAGNETIC FIELDS OF A VEHICLE |
(Rus)
|
|
Nyunin B.N., Grafkina M.V.
|
| Vol 6, No 1 (2012) |
DEVELOPMENT OF STRUCTURES WITH USAGE OF INNOVATIVE WAYS TO DETERMINE DYNAMIC YOUNG'S MODULUS AND POISSON'S RATIO |
(Rus)
|
|
Nyunin B.N., Grafkina M.V.
|
| Vol 6, No 1 (2012) |
ENVIRONMENTAL DESIGN OF CAST AUTOMOTIVE STRUCTURES BASED ON THE INNOVATIVE METHOD OF DETERMINATION OF DYNAMIC YOUNG'S MODULUS AND POISSON'S RATIO |
(Rus)
|
|
Nyunin B.N., Grafkina M.V.
|
| Vol 6, No 1 (2012) |
STUDY OF COLLOIDAL GRAPHITE THERMAL BARRIER COATINGS FOR HIGH-CARBON STEELS |
(Rus)
|
|
Petrov A.N.
|
| Vol 6, No 1 (2012) |
DETERMINATION OF FRICTION COEFFICIENT BY COMPRESSION OF RING SAMPLE DURING HOT DEFORMATION |
(Rus)
|
|
Petrov A.N.
|
| Vol 6, No 1 (2012) |
NUMERICAL STUDY OF FRICTION AT UPSET FORGING WITH RADIAL EXTRUSION OF PARTS OF ROD WITH A THICKENING-TYPE OF ALUMINUM ALLOY AD1 |
(Rus)
|
|
Petrov M.A., Petrov P.A., Kalpin Y.G.
|
| Vol 6, No 1 (2012) |
ANALYSIS OF MUTUAL COMPATIBILITY OF GEOMETRICAL AND PHYSICAL-MECHANICAL CHARACTERISTICS OF THE SURFACE LAYER OF TITANIUM ALLOY PRODUCTS AFTER ULTRASONIC MACHINING |
(Rus)
|
|
Taratynov O.V., Kharchenko V.V., Korneev D.V.
|
| Vol 6, No 1 (2012) |
COMPARATIVE EVALUATION OF THE ERROR IN GRINDING OF BEARING RINGS |
(Rus)
|
|
Koltunov I.I.
|
| Vol 6, No 1 (2012) |
DEPENDANCE OF GRINDING ACCURACY FROM PARAMETERS OF SET-UP |
(Rus)
|
|
Koltunov I.I., Lobanov A.S.
|
| Vol 6, No 1 (2012) |
ASSURANCE OF THE QUALITY OF PROCESSING OF COMPLEX CONTOURED PARTS ON MACHINES WITH VARIABLE ELEMENTS |
(Rus)
|
|
Maximov Y.V., Abramova A.R., Kuzminsky D.L., Mokrinskaya A.Y.
|
| Vol 6, No 1 (2012) |
ANALYSIS OF TECHNOLOGICAL PARAMETERS OF BENDING OF PARTS OF PIPE BEND-TYPE |
(Rus)
|
|
Kutyshkina E.A.
|
| Vol 6, No 1 (2012) |
CREATING A PROMISING TOOL FOR THE PLANETARY SHAPING OF INTERNAL THREADS ON THE BASIS OF VISUALIZATION OF 3D-MODELING |
(Rus)
|
|
Kosarev V.A., Ivanov V.F.
|
| Vol 6, No 1 (2012) |
Quality and reliability of systems of an electrical supply of independent objects |
(Rus)
|
|
Chernov A.E., Akimov A.V.
|
| Vol 6, No 1 (2012) |
MATHEMATIC MODEL OF GEAR SHIFTING BY FRICTION CLUTCHES IN TRANSMISSION OF TRACTOR |
(Rus)
|
|
Sharipov V.M., Gorodetsky K.I., Dmitriev M.I., Shchetinin Y.S., Malalnin I.A., Zenin A.S.
|
| Vol 6, No 1 (2012) |
METHODS OF FUEL PRODUCTION FROM ORGANIC RAW MATERIALS BY PLASMA CONVERTERS |
(Rus)
|
|
Shubin E.V., Martynov S.V., Eremin B.G., Nazarov A.V., Belopol A.V.
|
| Vol 6, No 1 (2012) |
USE OF FORMAL METHODS TO OBTAIN THE MATHEMATICAL MODEL OF AN OSCILLATORY SYSTEM |
(Rus)
|
|
Shchetinin Y.S.
|
| Vol 6, No 1 (2012) |
METHODOLOGICAL FEATURES OF DEVELOPMENT OF THE ARCHITECTURE OF INTELLIGENT TRANSPORT SYSTEMS |
(Rus)
|
|
Komarov V.V.
|
| Vol 6, No 1 (2012) |
ASSESSMENT OF QUALITY OF THE SURFACE OF ENGINEERING PRODUCTS BASED ON INTEGRATED APPROACH USING A MULTIDIMENSIONAL SCALE |
(Rus)
|
|
Bavykin O.B.
|
| Vol 6, No 1 (2012) |
THE NEW INSTRUMENT OF EVALUATION OF CONSENT OF EMPIRICAL AND THEORETICAL DISTRIBUTIONS |
(Rus)
|
|
Basova E.V., Kopylov L.V., Petukhov S.L.
|
| Vol 6, No 1 (2012) |
INFLUENCE OF THE METHOD OF TOOTH FORMING AND FORMS OF TOLERANCE FOR FINISHING ON THE ACCURACY OF MACHINED GEARS |
(Rus)
|
|
Vinogradov V.M., Shvychkov D.V.
|
| Vol 6, No 1 (2012) |
MECHANICAL PROPERTIES OF POWDER MATERIALS AFTER MULTICOMPONENT DIFFUSION SATURATION OF CR, NI AND MO |
(Rus)
|
|
Eremeeva Z.V., Nitkin N.M., Sharipzyanova G.K., Latypov R.A., Slukovskaya K.A., Skorikov R.A.
|
| Vol 6, No 1 (2012) |
METHOD FOR DETERMINATION OF PARAMETRIC RELIABILITY OF SPINDLE UNITS |
(Rus)
|
|
Ivannikov S.N., Shandov M.M.
|
| Vol 6, No 1 (2012) |
ENSURING PHYSICAL AND MECHANICAL PROPERTIES OF THE SURFACE LAYER OF CURVED SURFACES IN GRINDING |
(Rus)
|
|
Koltunov I.I., Lobanov A.S.
|
| Vol 6, No 1 (2012) |
APPROXIMATE SOLUTION OF THE CONTACT PROBLEM FOR THE TWO-LAYER FLEXIBLE COATING OF A SOLID CYLINDER |
(Rus)
|
|
Bozhkova L.V., Ryabov V.G., Noritsina G.I., Akulshina T.V.
|
| Vol 6, No 1 (2012) |
THEORETICAL ASPECTS OF BUSINESS MANAGEMENT INDUSTRY: MARKETING APPROACH |
(Rus)
|
|
Baskov L.P.
|
| Vol 6, No 1 (2012) |
THE COMPETITIVENESS OF AUTOMOTIVE SERVICE BUSINESSES |
(Rus)
|
|
Shuplyakov V.S., Yakovenko G.V., Pervunin S.N., Polyakova N.S., Yakovenko A.G.
|
| Vol 6, No 1 (2012) |
PROBLEMS OF QUALITY OF INNOVATION PROJECTS |
(Rus)
|
|
Kamenetsky V.A., Alenina E.E., Volosatova V.V.
|
| Vol 6, No 1 (2012) |
POTENTIAL FOR CLUSTER DEVELOPMENT CONTROL IN MOSCOW REGION |
(Rus)
|
|
Tumasyants S.M., Nikulin N.A.
|
| Vol 6, No 1 (2012) |
NEW APPROACHES TO GOVERNANCE OF INNOVATION PROCESSES IN RUSSIAN ECONOMY |
(Rus)
|
|
Rayzberg B.A.
|
| Vol 6, No 1 (2012) |
ANALYSIS OF EFFECTIVENESS OF INVESTMENTS IN MODERNIZATION OF PRODUCTION FACILITIES OF AN ENGINEERING COMPANY |
(Rus)
|
|
Kokurin D.I., Pavelyev V.P., Koltunov A.I.
|
| Vol 6, No 1 (2012) |
PROBLEMS AND PROSPECTS OF MODERN VOCATIONAL EDUCATION AS A DYNAMIC SYSTEM |
(Rus)
|
|
Bagramyants N.L., Ivleva M.L.
|
| Vol 6, No 1 (2012) |
MANAGEMENT TECHNOLOGY FOR DEVELOPMENT OF A SYSTEM FOR EVALUATION OF THE QUALITY OF EDUCATIONAL PROCESS AT UNIVERSITY |
(Rus)
|
|
Belova S.N.
|
| Vol 6, No 1 (2012) |
THE ROLE OF INDUSTRY TERMINOLOGY IN FORMATION OF PROFESSIONAL COMMUNICATIVE COMPETENCE OF A SPECIALIST |
(Rus)
|
|
Zakirova E.S.
|
| Vol 6, No 1 (2012) |
TYPOLOGICAL ANALYSIS APPLIED RESEARCH TALENT |
(Rus)
|
|
Ivleva M.L., Inozemtsev V.A.
|
| Vol 6, No 1 (2012) |
CONDITIONS NECESSARY FOR THE DEVELOPMENT OF SMALL INNOVATIVE BUSINESSES IN RUSSIA |
(Rus)
|
|
Gribov V.D., Kamchatnikov G.V.
|
| Vol 6, No 1 (2012) |
DEVELOPMENT OF REGIONAL ENGINEERING BY CLUSTERING |
(Rus)
|
|
Fridlyanov V.N., Strakovskaya M.V.
|
| Vol 6, No 1 (2012) |
VALUE OF EXACT DECISIONS OF EQUALITY OF MOTION OF VISCID LIQUID NAVIER-STOKES |
(Rus)
|
|
Viskrebtsov V.G.
|
| Vol 6, No 1 (2012) |
THE FLUTTER OF A PLATE OF VARIABLE THICKNESS |
(Rus)
|
|
Kudryavtsev B.Y.
|
| Vol 6, No 1 (2012) |
MODEL OF ELASTOPLASTIC BEHAVIOR OF STRUCTURE MATERIALS AT THERMOCYCLIC LOADING |
(Rus)
|
|
Temis Y.M., Azmetov K.K., Fakeev A.I.
|
| Vol 6, No 1 (2012) |
KEY PROBLEMS OF MANAGEMENT ENHANCEMENT FOR MACHINE-BUILDING ENTERPRISES AND WAYS OF THEIR DECISION |
(Rus)
|
|
Gruzinov V.P.
|
| Vol 6, No 1 (2012) |
The problems of public-private partnership in the field of industry in the Russian Federation |
(Rus)
|
|
Yakovenko G.V., Boronnikov D.A., Nomokonov A.N., Yakovenko A.G.
|
| Vol 6, No 1 (2012) |
THE ROLE OF SMALL INNOVATIVE BUSINESS IN THE MODERN ECONOMY |
(Rus)
|
|
Mkhitaryan A.A., Chabanenko E.B.
|
| Vol 6, No 1 (2012) |
PROBLEMS OF DEVELOPMENT OF MANAGEMENT PERSONNEL IN ENTERPRISES OF MECHANICAL ENGINEERING |
(Rus)
|
|
Ilyin S.N., Osipov I.S., Volkov Y.A.
|
| Vol 6, No 1 (2012) |
ANALYSIS OF INNOVATIVE MODELS OF MANAGEMENT AND ORGANIZATION DEVELOPMENT |
(Rus)
|
|
Filyakin Y.P., Moguev B.D.
|
| Vol 6, No 1 (2012) |
FORMATION OF THE MARKET FOR AUTOMOTIVE COMPONENTS AND STEPS NEEDED TO CREATE COMPETITIVE SUPPLIERS |
(Rus)
|
|
Drynochkin A.V., Alenina E.E., Gontar M.M.
|
| Vol 6, No 1 (2012) |
INNOVATIONS OF RUSSIA IN GLOBALIZED ECONOMY |
(Rus)
|
|
Pivovarov V.I., Strakovskaya M.V.
|
| Vol 6, No 1 (2012) |
INDIVIDUAL STYLE OF PEDAGOGICAL ACTIVITY DURING TRAINING OF A COMPETITIVE ENGINEERING |
(Rus)
|
|
Krutina E.V.
|
| Vol 6, No 1 (2012) |
AUTOMATION OF SYSTEMS OF SPARE PARTS AND EQUIPMENT SUPPLY MANAGEMENT FOR AN ALL-WHEEL DRIVE VEHICLE ON THE CHASSIS OF URAL-6320 |
(Rus)
|
|
Galkin K.V.
|
| Vol 6, No 1 (2012) |
OPTIMIZATION OF TRAILER DESIGN PARAMETERS CONSIDERING ENSURING OF STABILITY AND CONTROLLABILITY OF ARTICULATED TRUCK |
(Rus)
|
|
Kisulenko B.V.
|
| Vol 6, No 1 (2012) |
REDUCTION OF AERODYNAMIC NOISE OF THE EXHAUST VALVE OF AIR EXCHANGE SYSTEM ON VEHICLES |
(Rus)
|
|
Kuzovov A.N., Ovtsynov P.V., Merkulov V.I.
|
| Vol 6, No 1 (2012) |
PROCESSING OF VEGETABLE FATS INTO GASEOUS HYDROCARBON FUEL IN MULTICOMPONENT PLASMA CONVERTER |
(Rus)
|
|
Nazarov A.V., Martynov S.V., Eremin B.G., Poturaev S.E., Andrukh O.N.
|
| Vol 6, No 1 (2012) |
THE ROLE OF INDUSTRIAL CORPORATIONS IN THE INNOVATION BUSINESS |
(Rus)
|
|
Gribanich V.M.
|
| Vol 6, No 1 (2012) |
MATHEMATICAL MODELING OF HYDRAULIC DRIVE OF A FAN FOR AUTOMOTIVE ENGINE COOLING SYSTEM |
(Rus)
|
|
Trukhanov K.A.
|
| Vol 6, No 1 (2012) |
DEVELOPMENT OF HYDROGEN POWER PLANT OF A NEW GENERATION |
(Rus)
|
|
Khripach N.A., Lezhnev L.Y., Papkin B.A., Shustrov F.A., Ivanov D.A., Tatarnikov A.P., Sonkin V.I.
|
| Vol 6, No 1 (2012) |
SIMULATION MODELING OF ABS OPERATION BASED ON THE QUASI-SPATIAL DYNAMIC MODEL OF A VEHICLE |
(Rus)
|
|
Lata V.N., Solomatin N.S., Okunev A.P., Eremina I.V., Ermolin A.V.
|
| Vol 6, No 1 (2012) |
THEORETICAL JUSTIFICATION OF REQUIREMENTS FOR THE AUTOMATIC ADAPTIVE CONTROL OF ELECTRIC TRANSMISSION OF THE FOUR-AXLE ALL-WHEEL DRIVE VEHICLE WITH INDIVIDUAL WHEEL DRIVES |
(Rus)
|
|
Kulakov N.A., Lepeshkin A.V., Cheranev S.V.
|
| Vol 6, No 1 (2012) |
INCREASE OF EFFECTIVENESS OF A ROTARY HEAT EXCHANGER OF A SMALL-SIZE GAS TURBINE ENGINE |
(Rus)
|
|
Kostyukov A.V., Alekseev R.A.
|
| Vol 6, No 1 (2012) |
USAGE OF MULTIPARAMETER NEURAL NETWORK MODEL TO CONTROL POWER UNITS ON THE BASIS OF INTERNAL COMBUSTION ENGINE |
(Rus)
|
|
Petrichenko D.A., Khripach N.A., Lezhnev L.Y., Papkin B.A., Shustrov F.A., Tatarnikov A.P.
|
| Vol 6, No 1 (2012) |
PERFECT AND IMPERFECT NONHOLONOMIC KINEMATIC CONNECTIONS OF THE ROAD WHEEL WITH SURFACE |
(Rus)
|
|
Katanaev N.Т.
|
| Vol 6, No 1 (2012) |
METHOD OF OPTIMIZATION OF THE LAWS CONTROLLING VEHICLE SUSPENSION CONSIDERING OPERATING CONDITIONS |
(Rus)
|
|
Bakhmutov S.V., Akhmedov A.A., Orlov A.B.
|
| Vol 6, No 1 (2012) |
REDUCTION OF THERMAL STRESSES IN THE PLATE HEAT EXCHANGER AT NONSTEADY OPERATIONAL MODES |
(Rus)
|
|
Iskhakov V.S., Merkulov V.I., Sugonyaev M.V.
|
| Vol 6, No 1 (2012) |
SYSTEMIC EVALUATION OF CONTROLLABILITY OF WHEELED MACHINES |
(Rus)
|
|
Katanaev N.Т.
|
| Vol 6, No 1 (2012) |
SYSTEMS OF VEHICLE ELECTRICAL POWER SUPPLY WITH INTELLECTUAL ALGORITHMS PROVIDING INCREASE OF ECOLOGICAL AND POWER INDICATORS |
(Rus)
|
|
Chernov A.E., Akimov A.V.
|
| Vol 6, No 1 (2012) |
CALCULATION OF THREADED JOINTS UNDER ACTION OF CYCLIC AND IMPACT SHEAR LOAD |
(Rus)
|
|
Antonov I.S.
|
| Vol 5, No 2 (2011) |
Influence of Population Settlement Pattern of Russian Federation on the Regional Economics of the Country |
(Rus)
|
|
Kozlova A.A.
|
| Vol 5, No 2 (2011) |
The intangible Capital as a Competitive Advantage of an Organization |
(Rus)
|
|
Sorokina G.P., Grankina V.L.
|
| Vol 5, No 2 (2011) |
Adaptation of the Teaching Methods of Material Science Course to Modern Conditions |
(Rus)
|
|
Volkov G.M., Manevsky S.E.
|
| Vol 5, No 2 (2011) |
Monetary Problems of the Russian Economy |
(Rus)
|
|
Katanaev N.T., Larina E.V.
|
| Vol 5, No 2 (2011) |
Evaluating the Effectiveness of Investments in the Reorganization of Production |
(Rus)
|
|
Pavelyev V.P., Koltunov A.I.
|
| Vol 5, No 2 (2011) |
Application of nano-sized powders of carbon and chromium on the processes of charge preparation and compaction of powder steels |
(Rus)
|
|
Eremeeva Z.V., Nitkin N.M., Sharipzyanova G.K.
|
| Vol 5, No 2 (2011) |
Sustainable Growth of Competitiveness as a Result of the Modernization of Russia on the Basis of Innovation |
(Rus)
|
|
Kravtsova V.I., Alenina E.E., Trishkin A.G.
|
| Vol 5, No 2 (2011) |
Organizational Design Adaptation Strategies Aviation Industry to the Environment |
(Rus)
|
|
Kalugina G.A., Milodanova Y.A., Tikhonov A.I., Ruzakov M.A.
|
| Vol 5, No 2 (2011) |
Methodological Problems in the Accuracy of Scientific Terminology |
(Rus)
|
|
Piskun A.V.
|
| Vol 5, No 2 (2011) |
Prospects of High-tech Development of the Russian Federation in Context of the Global Geopolitical Transformations |
(Rus)
|
|
Platko А.Y.
|
| Vol 5, No 2 (2011) |
Analysis of Formation of Machining Error in the Technological System of Combined Machining and Surface Plastic Deformation of Non-rigid Parts of the Hollow Cylinder Type |
(Rus)
|
|
Vetrova E.A.
|
| Vol 5, No 2 (2011) |
Studies of Microcutting Kinematics on Designing Grinding Heads to Form the Sealing Surfaces on the Parts of Pipe Fitting |
(Rus)
|
|
Gaysin S.N., Tsvik L.B., Mukhin S.V., Travin D.V.
|
| Vol 5, No 2 (2011) |
Analysis of the Main Problems of Formation of the Modern System of Roadside Services on the Territory of the Russian Federation |
(Rus)
|
|
Boronnikov D.A., Pervunin S.N., Yakovenko A.G.
|
| Vol 5, No 2 (2011) |
The Competitiveness of the Russian Automotive Industry as an Important Aspect of the Strategy of Development of the Automotive Industry in the Russian Federation |
(Rus)
|
|
Yakovenko G.V., Polyakova N.S., Volkova Y.A., Yakovenko A.G.
|
| Vol 5, No 2 (2011) |
The Information Revolution and Information Society |
(Rus)
|
|
Udovik V.E., Selyutin A.V.
|
| Vol 5, No 2 (2011) |
Loanwords in Modern Russian |
(Rus)
|
|
Zmazneva O.A.
|
| Vol 5, No 2 (2011) |
The Risks of the Commercialization of Innovations |
(Rus)
|
|
Mokridin R.Y.
|
| Vol 5, No 2 (2011) |
Development of Software for Calculation of a Spatial Dimension Chain |
(Rus)
|
|
Ankin A.V., Kuzminsky D.L.
|
| Vol 5, No 2 (2011) |
Modeling of Dynamics of Vehicles Manual Transmissions System with Frictional Clutch |
(Rus)
|
|
Selifonov V.V., Nguyen Khac T.
|
| Vol 5, No 2 (2011) |
Informatization of Laboratory Works in the Field of Metal Forming |
(Rus)
|
|
Voronkov V.I., Petrov P.A., Saprykin B.Y., Prokopov F.B., Taranov A.V.
|
| Vol 5, No 2 (2011) |
High Temperature Rotary Heat Exchanger for Gas Turbine and Gyratory Engines |
(Rus)
|
|
Kostyukov A.V., Dementyev A.A.
|
| Vol 5, No 2 (2011) |
Method of improving the performance of gasoline engine work with internal mixing |
(Rus)
|
|
Fomin V.M., Platunov А.S.
|
| Vol 5, No 2 (2011) |
Mathematical Model of Steady Movement of an Articulated Truck with an Active Trailer that Allows to Estimate the Losses in Transmission |
(Rus)
|
|
Lepeshkin A.V.
|
| Vol 5, No 2 (2011) |
Hydraulic drive fan for cooling an automobile engine |
(Rus)
|
|
Trukhanov K.A.
|
| Vol 5, No 2 (2011) |
Designing of Basic Components of Systems of Vehicle Electrical Supply and Start-up Considering Real Service Conditions, Event and Algorithm |
(Rus)
|
|
Akimov A.V., Chernov A.E.
|
| Vol 5, No 2 (2011) |
Model of the Electroarc Discharge for Plasma Device of Low Power |
(Rus)
|
|
Vladiyko V.B., Nazarov A.V., Eremin B.G., Martynov S.V., Andrukh O.N.
|
| Vol 5, No 2 (2011) |
Loading Control of Passenger Car Transmission in Urban Driving Conditions Using ECM System |
(Rus)
|
|
Prokopyev M.V., Petrunin V.P., Kuevda A.V., Turapin M.K., Maslov S.N.
|
| Vol 5, No 2 (2011) |
Comparative Analysis of Power Possibilities of Autotractor Generator Rotors with Various Systems of Excitation |
(Rus)
|
|
Sugubov A.M., Chernov A.E.
|
| Vol 5, No 2 (2011) |
Functional Requirements for the Automatic System of Vehicle Accident Identification |
(Rus)
|
|
Komarov V.V., Garagan S.A.
|
| Vol 5, No 2 (2011) |
Linguistic-didactic Principles of the Intermediate Assessment to Meet the Requirements of Academic Mobility and Educational Standards of Third Generation |
(Rus)
|
|
Anokhina T.Y., Ankin A.V.
|
| Vol 5, No 2 (2011) |
Importance of Credit Norms in Student Physical Education |
(Rus)
|
|
Frolov V.G., Chernov Y.I.
|
| Vol 5, No 2 (2011) |
Integration of Research Activities of Students and the Educational Process in Order to Create an Innovative Environment at the Department of "Chemistry" |
(Rus)
|
|
Artamonova I.V., Zabenkina E.O., Rusakova S.M., Godunov E.B.
|
| Vol 5, No 2 (2011) |
New Directions of Bachelors Education on Technology of Construction Materials Department |
(Rus)
|
|
Kuznetsov V.A., Cherepahin A.A., Shlykova A.V.
|
| Vol 5, No 2 (2011) |
Integration of Russian Higher Education into European Educational Space |
(Rus)
|
|
Kochanova E.N., Kochanov N.P.
|
| Vol 5, No 2 (2011) |
Optimization of the Laws of Control the Parameters of Two-axle Vehicle Suspension Using STABCON 2.0 System Software |
(Rus)
|
|
Bakhmutov S.V., Akhmedov A.A., Orlov A.B.
|
| Vol 5, No 2 (2011) |
Competitive Advantages of the University |
(Rus)
|
|
Chulkova O.O.
|
| Vol 5, No 2 (2011) |
Development and Research of a Mathematical Model of a Four-wheel-drive Vehicle with Electric Transmission |
(Rus)
|
|
Kulakov N.A., Lepeshkin A.V., Cheranev S.V.
|
| Vol 5, No 2 (2011) |
The Formation of the Elements of Advanced Training of Students in Higher Education Based on an Innovative Approach |
(Rus)
|
|
Alenina E.E., Paskhina A.V.
|
| Vol 5, No 2 (2011) |
Wheel Gyro Effect Influence on Forced Oscillations of a Vehicle |
(Rus)
|
|
Gleizer A.I., Emelyanov S.R., Lata V.N., Ermolin A.V.
|
| Vol 5, No 2 (2011) |
Torsional Damper Placement in Vehicle Transmission |
(Rus)
|
|
Solomatin N.S., Zotov E.M., Simonov D.V.
|
| Vol 5, No 2 (2011) |
The Nature of the Socio-economic System in Subcapitalist Development of Russia |
(Rus)
|
|
Filyakin J.P.
|
| Vol 5, No 2 (2011) |
Influence of Uneven Workpiece Allowance on the Output Parameters of Technological Equipment |
(Rus)
|
|
Ivannikov S.N., Shandov M.M.
|
| Vol 5, No 2 (2011) |
Method for measuring small segments of cylindrical surfaces |
(Rus)
|
|
Suslin V.P., Dzhunkovsky A.V.
|
| Vol 5, No 2 (2011) |
Model of Elastoplastic Material at Nonisothermal Cyclic Loading |
(Rus)
|
|
Temis Y.M., Fakeev A.I.
|
| Vol 5, No 2 (2011) |
A Numerical Solution of the Stress Concentration Problem for the Case of a Three-layered Elastic Plane with the Two Identical Vertically Placed Circular Holes under Longitudinal Tension |
(Rus)
|
|
Mikhaylova V.L., Sukhomlinov L.G., Mazin V.A.
|
| Vol 5, No 2 (2011) |
Registration Technique of Optical and Thermo Radiative Characteristics with Influence Compensation of Scattering Indicatrix of Heat-insulating and Thermal Barrier Materials and Coatings for Combustion Chambers of High Speed Diesel Engines |
(Rus)
|
|
Merzlikin V.G., Sutugin V.G., Stifeev L.K., Khudyakov S.V.
|
| Vol 5, No 2 (2011) |
Link of the Dendritic Structure of the Alloy Solidifying in a Two-phase Zone with Diffusion Supercooling in the Model of Cellular Two-phase Zone |
(Rus)
|
|
Sulimtsev I.I.
|
| Vol 5, No 2 (2011) |
Tekhnologiya uprochneniya poverkhnosti putem sozdaniya neodnorodnoy struktury pri azotirovanii v tleyushchem razryade |
(Rus)
|
|
Ramazanov K.N., Agzamov R.D.
|
| Vol 5, No 2 (2011) |
Computer Simulation of Helical Groove Processing on the Workpiece of End-milling Cutter |
(Rus)
|
|
Petukhov Y.E., Domnin P.V.
|
| Vol 5, No 2 (2011) |
Simulation of Tool Contact with a Workpiece When Processing by Smoothing in the Kompas 3D Software |
(Rus)
|
|
Kuznetsov V.A., Sazonov D.A., Smirnov A.V.
|
| Vol 5, No 2 (2011) |
Influence of Residual Stresses on Product Quality on Cold Forming of Sheet Workpieces |
(Rus)
|
|
Kolikov A.P., Lyutsau A.V., Lisunets N.L., Gladkov V.I., Shpunkin N.F.
|
| Vol 5, No 2 (2011) |
Synthesis of Direct Torque Control System of Asynchronous Traction Electric Drives |
(Rus)
|
|
Ovsyannikov E.M., Nguyen Quang T.
|
| Vol 5, No 2 (2011) |
Mathematical Modeling of Cyclic Deformation |
(Rus)
|
|
Temis Y.M., Azmetov K.K.
|
| Vol 5, No 2 (2011) |
Analysis of the Mechanics of Cutting by a Cylindrical Drill with a Bridge |
(Rus)
|
|
Olenin L.D.
|
| Vol 5, No 2 (2011) |
Process Optimization of Laser Processing in Terms of System-synergistic analysis |
(Rus)
|
|
Isakov V.V.
|
| Vol 5, No 2 (2011) |
Influence of the Surface Energy of Metallic Specimens on Strength of Adhesive Joints |
(Rus)
|
|
Zinina I.I., Pimanov M.V.
|
| Vol 5, No 2 (2011) |
Technology of Threading of High-length Threads |
(Rus)
|
|
Timiryazev V.A., Khostikoev M.Z., Chertov F.N.
|
| 1801 - 1950 of 2404 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 > >>
|
