Influence of Residual Stresses on Product Quality on Cold Forming of Sheet Workpieces
- Authors: Kolikov AP1, Lyutsau AV2, Lisunets NL1, Gladkov VI2, Shpunkin NF3
-
Affiliations:
- National university of science and technology, Research Institute of Automotive Industry Technology
- Ltd, NIITAVTOPROM
- Moscow State Technical University MAMI
- Issue: Vol 5, No 2 (2011)
- Pages: 139-144
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/69927
- DOI: https://doi.org/10.17816/2074-0530-69927
- ID: 69927
Cite item
Full Text
Abstract
About the authors
A P Kolikov
National university of science and technology, Research Institute of Automotive Industry Technologyд.т.н. проф; НИТУ «МИСиС»; National university of science and technology, Research Institute of Automotive Industry Technology
A V Lyutsau
Ltd, NIITAVTOPROMк.т.н. с.н.с; ОАО «НИИТавтопром»; Ltd, NIITAVTOPROM
N L Lisunets
National university of science and technology, Research Institute of Automotive Industry Technologyк.т.н. доц; НИТУ «МИСиС»; National university of science and technology, Research Institute of Automotive Industry Technology
V I Gladkov
Ltd, NIITAVTOPROMк.т.н. проф; ОАО «НИИТавтопром»; Ltd, NIITAVTOPROM
N F Shpunkin
Moscow State Technical University MAMIк.т.н. проф8.916.225.64.33, kiod.MAMI.@bk.ru; МГТУ «МАМИ»; Moscow State Technical University MAMI
References
- Лютцау А.В., Котелкин А.В., Звонков А.Д., Матвеев Д.Б. Новые средства диагностики неразрушающего контроля напряженного состояния заготовок и изделий. // В сб. «Пластическая деформация сталей и сплавов» - М.: Изд-во МИСиС, 1996. 436 - 441с.
- Лютцау А.В., Котелкин А.В., Звонков А.Д., Матвеев Д.Б., Середа В.Н., Каксис Ю.А. Портативные рентгеновские дифрактометры для неразрушающего контроля напряжений в поверхностных слоях объектов техники. // «Контроль. Диагностика», № 1, М. 2000, 18-20с.
- Корольков В.И. Технология и оборудование процессов ротационной вытяжки. // Воронеж. Изд-во ВГТУ, 1999. 115 с.
- Лисунец Н.Л. Коликов А.П. Качалин А.А. Исследование влияния технологических факторов ротационной вытяжки на качество заготовок сложнопрофильных деталей из коррозионно-стойких и жаропрочных сталей. // «Кузнечно-штамповочное производство» 2006, № 5. 24-26 с.