| Issue |
Section |
Title |
File |
| Vol 57, No 1 (2016) |
Metallurgy of Nonferrous Metals |
Pressure leaching of copper arsenic-containing mattes with copper sulfate solutions |
|
| Vol 57, No 1 (2016) |
Metallurgy of Nonferrous Metals |
Thermodynamic investigations and substantiation of the aluminothermic fabrication method of calcium |
|
| Vol 57, No 1 (2016) |
Pressure Treatment of Metals |
Features of the variation of energy-power parameters, temperature, and hydrostatic pressure under the continuous extrusion of a noncompact aluminum material |
|
| Vol 57, No 1 (2016) |
Pressure Treatment of Metals |
The influence of fabrication modes of sheets of V-1461 alloy on the structure crystallography and anisotropy of properties |
|
| Vol 57, No 1 (2016) |
Physical Metallurgy and Heat Treatment |
Bulk metallic glasses: Fabrication, structure, and structural changes under heating |
|
| Vol 57, No 1 (2016) |
Self-Propagating High-Temperature Synthesis |
Fabrication of aluminum–ceramic skeleton composites based on the Ti2AlC MAX phase by SHS compaction |
|
| Vol 57, No 1 (2016) |
Self-Propagating High-Temperature Synthesis |
Fabrication of alloyed aluminum nickelides by metallothermy of metals oxides |
|
| Vol 57, No 1 (2016) |
Production Processes and Properties of Powders |
Determination of the surface of dendritic electrolytic zinc powders and evaluation of its fractal dimension |
|
| Vol 57, No 1 (2016) |
Production Processes and Properties of Powders |
Influence of the activation time on parameters of a graphite structure |
|
| Vol 57, No 1 (2016) |
Theory and Processes of Forming and Sintering of Powder Materials |
Compaction features during sintering VN8M alloy with additives of nanodimensional tungsten carbide |
|
| Vol 57, No 1 (2016) |
Theory and Processes of Forming and Sintering of Powder Materials |
The powdered calcium hydride TiNi intermetallic compound |
|
| Vol 57, No 1 (2016) |
Refractory, Ceramic, and Composite Materials |
Regularities of reactions of titanium carbonitrides and oxycarbides with nickel |
|
| Vol 57, No 1 (2016) |
Porous Materials and Biomaterials |
Structure and phase composition of wear-resistant coatings of the TiB2–Al system prepared by electroexplosion sputtering |
|
| Vol 57, No 2 (2016) |
Metallurgy of Nonferrous Metals |
Recovery of copper from solutions by highly dispersed modified aluminum silicates |
|
| Vol 57, No 2 (2016) |
Metallurgy of Rare and Noble Metals |
A novel process to effectively extract values from a manganese-bearing Au-Ag ore by pretreatment with iron scrap as reductant |
|
| Vol 57, No 2 (2016) |
Pressure Treatment of Metals |
Computer analysis of the deformation mode of the drawing tool for platinum alloys |
|
| Vol 57, No 2 (2016) |
Pressure Treatment of Metals |
Computational-and-experimental evaluation of the implementation condition of combined rolling–pressing using the power balance method |
|
| Vol 57, No 2 (2016) |
Pressure Treatment of Metals |
Manufacturing residual stresses during the production of zirconium sheets |
|
| Vol 57, No 2 (2016) |
Powder Metallurgy of Nonferrous Metals and Alloys |
Application of SHS processes for in situ preparation of alumomatrix composite materials discretely reinforced by nanodimensional titanium carbide particles (Review) |
|
| Vol 57, No 2 (2016) |
Powder Metallurgy of Nonferrous Metals and Alloys |
Production of a sintered alloy based on the TiAl intermetallic compound: Part 2. Investigation into forming and sintering processes |
|
| Vol 57, No 2 (2016) |
Self-Propagating High-Temperature Synthesis |
Investigation into the influence of the remelting temperature on the structural heredity of alloys fabricated by centrifugal SHS metallurgy |
|
| Vol 57, No 2 (2016) |
Production Processes and Properties of Powders |
Influence of operational parameters and design of the ejection nozzle on characteristics of finely dispersed aluminum powder: Part I. Influence of operational parameters of the nozzle |
|
| Vol 57, No 2 (2016) |
Theory and Processes of Forming and Sintering of Powder Materials |
Variation in the structure and properties of sintered alloys under the effect of nanodimensional carbon additives |
|
| Vol 57, No 2 (2016) |
Refractory, Ceramic, and Composite Materials |
Influence of alloying titanium carbonitride by transition metals of groups IV–VI on the interaction with the nickel melt |
|
| Vol 57, No 2 (2016) |
Refractory, Ceramic, and Composite Materials |
Investigation into physicomechanical properties and structure of the Al–Al2O3 composite material fabricated using mechanical treatment of the PAP-2 aluminum powder and reaction sintering of powder billets |
|
| Vol 57, No 2 (2016) |
Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Fluxes |
Review of domestic designs in the field of protecting carbonaceous materials against gas corrosion and erosion in high-speed plasma fluxes |
|
| Vol 57, No 3 (2016) |
Metallurgy of Nonferrous Metals |
Thermodynamic prediction of melting of copper-electrolyte slime |
|
| Vol 57, No 3 (2016) |
Metallurgy of Nonferrous Metals |
Thermodynamics and kinetics of thermal dissociation of dolomite |
|
| Vol 57, No 3 (2016) |
Metallurgy of Rare and Noble Metals |
HCl leaching behaviour of a bastnasite ore in terms of thorium and rare earth elements |
|
| Vol 57, No 3 (2016) |
Foundry |
Influence of solidification conditions of billets of tin bronze BrO10C2N3 on its structure |
|
| Vol 57, No 3 (2016) |
Foundry |
Melt treatment by pulsed magnetic fields aimed at controlling the structure and properties of industrial silumins |
|
| Vol 57, No 3 (2016) |
Foundry |
Optimization of the composition of silicon brass LTs16K4 with the purpose of increasing its castability when fabricating art castings |
|
| Vol 57, No 3 (2016) |
Pressure Treatment of Metals |
Optimization of isothermal pressing of ingots of aluminum alloys with the preliminary gradient heating |
|
| Vol 57, No 3 (2016) |
Pressure Treatment of Metals |
Force conditions of pressing light-alloy drill pipes with spiral ribbing |
|
| Vol 57, No 3 (2016) |
Physical Metallurgy and Heat Treatment |
Formation regularities of grain-boundary interlayers of the α-Ti phase in binary titanium alloys |
|
| Vol 57, No 3 (2016) |
Physical Metallurgy and Heat Treatment |
An increase in fatigue service life of eutectic silumin by electron-beam treatment |
|
| Vol 57, No 3 (2016) |
Refractory, Ceramic, and Composite Materials |
Regularities of the contact interaction of titanium carbide with Ni and Ni–Mo melts |
|
| Vol 57, No 3 (2016) |
Refractory, Ceramic, and Composite Materials |
Prediction of effective elasticity moduli of porous composite materials |
|
| Vol 57, No 3 (2016) |
Modification of Surface Including Beams of Charged Particles and Photon and Plasma Fluxes |
Application of high-current pulsed electron beams for modifying the surface of gas-turbine engine blades |
|
| Vol 57, No 3 (2016) |
Nanostructured Materials and Functional Coatings |
The use of titanium aluminides to form electric-spark coatings |
|
| Vol 57, No 4 (2016) |
Mineral Processing of Nonferrous Metals |
Studies on optimization of parameters for dewatering of ground calcite-rich ore |
|
| Vol 57, No 4 (2016) |
Metallurgy of Nonferrous Metals |
Studies on dissolution kinetics of dolime in electrothermal magnesium slag |
|
| Vol 57, No 4 (2016) |
Metallurgy of Nonferrous Metals |
Studies on process for conversion of waste aluminium dross into value added products |
|
| Vol 57, No 4 (2016) |
Metallurgy of Nonferrous Metals |
Leaching reaction and kinetics of zinc from indium-bearing zinc ferrite under microwave heating |
|
| Vol 57, No 4 (2016) |
Metallurgy of Nonferrous Metals |
Reaction Kinetics of magnesite ore in dilute ethanoic acid |
|
| Vol 57, No 4 (2016) |
Metallurgy of Nonferrous Metals |
Lead production from recycled paste of lead acid batteries with SiC-Na2CO3 |
|
| Vol 57, No 4 (2016) |
Metallurgy of Nonferrous Metals |
Selenium partitioning between slag and matte during smelting |
|
| Vol 57, No 4 (2016) |
Metallurgy of Nonferrous Metals |
Effect of Tween 80 on electrochemical deposition of cobalt from sulphate solutions |
|
| Vol 57, No 4 (2016) |
Metallurgy of Rare and Noble Metals |
Extraction of vanadium and synthesis of vanadium pentaoxide from Bayer’s sludge |
|
| Vol 57, No 4 (2016) |
Physical Metallurgy and Heat Treatment |
Effect of stirring speed and time on microstructure and mechanical properties of Cast Al–Ti–Zr–B4C composite produced by stir casting |
|
| Vol 57, No 4 (2016) |
Powder Metallurgy of Nonferrous Metals and Alloys |
Thermodynamic consideration and phase evolution during oxidation of tungsten–copper electrical contactor scraps |
|
| Vol 57, No 4 (2016) |
Powder Metallurgy of Nonferrous Metals and Alloys |
Direct electrolytic refining of end-of-life industrial copper waste scraps for production of high purity copper powder |
|
| Vol 57, No 4 (2016) |
Powder Metallurgy of Nonferrous Metals and Alloys |
Characterization of hot pressed CuAl–TiC composites with different TiC grain sizes |
|
| Vol 57, No 4 (2016) |
Powder Metallurgy of Nonferrous Metals and Alloys |
Corrosion resistance and adhesion of poly(L-lactic acid)/MgF2 composite coating on AZ31 magnesium alloy for biomedical application |
|
| Vol 57, No 5 (2016) |
Mineral Processing of Nonferrous Metals |
Mineralization kinetics of air bubbles allowing for the particle detachment and time of buoying of aggregates |
|
| Vol 57, No 5 (2016) |
Metallurgy of Nonferrous Metals |
Optimization and dissolution kinetics of vanadium recovery from LD converter slag in alkaline media |
|
| Vol 57, No 5 (2016) |
Metallurgy of Rare and Noble Metals |
Sorption of palladium(II) from nitric acid solutions by silica modified with amino groups |
|
| Vol 57, No 5 (2016) |
Metallurgy of Rare and Noble Metals |
Separation of zirconium and hafnium fluorides by the sublimation–sorption method |
|
| Vol 57, No 5 (2016) |
Foundry |
Influence of treatment of melts by electromagnetic acoustic fields on the structure and properties of alloys of the Al–Si system |
|
| Vol 57, No 5 (2016) |
Pressure Treatment of Metals |
Temperature modes and critical velocities when drawing the wire |
|
| Vol 57, No 5 (2016) |
Physical Metallurgy and Heat Treatment |
Influence of annealing on electrical resistance and hardness of hot-rolled aluminum alloy sheets containing up to 0.5% Zr |
|
| Vol 57, No 5 (2016) |
Physical Metallurgy and Heat Treatment |
Influence of small additives of calcium on the structure and properties of ML5 alloy (AZ91) |
|
| Vol 57, No 5 (2016) |
Physical Metallurgy and Heat Treatment |
Effect of Gd on microstructure, mechanical properties and wear behavior of as-cast Mg–5Sn alloy |
|
| Vol 57, No 5 (2016) |
Physical Metallurgy and Heat Treatment |
Optimization of friction stir spot welding process parameters of dissimilar Al 5083 and C 10100 joints using response surface methodology |
|
| Vol 57, No 5 (2016) |
Physical Metallurgy and Heat Treatment |
Investigation on effect of pulse correction on structure property in dissimilar welds of galvanized steel and aluminum alloy obtained by gas metal arc welding cold metal transfer |
|
| Vol 57, No 5 (2016) |
Production Processes and Properties of Powders |
Influence of dispersed microadditives on the structure and properties of powder carbon and high-chromium steels |
|
| Vol 57, No 5 (2016) |
Theory and Processes of Formation and Sintering of Powder Materials |
Investigation into the compaction of nanopowders and micropowders of silicon carbide in high-pressure apparatus |
|
| Vol 57, No 5 (2016) |
Self-Propagating High-Temperature Synthesis |
Formation of the structure and phase composition of the Ti–Al–Ta-based materials |
|
| Vol 57, No 5 (2016) |
Refractory, Ceramic, and Composite Materials |
Kinetics and contact interaction mechanism of titanium carbonitride with the Ni–Mo melt |
|
| Vol 57, No 5 (2016) |
Refractory, Ceramic, and Composite Materials |
Fine structure of interphase boundaries in hard alloys of the chromium carbide–titanium system |
|
| Vol 57, No 5 (2016) |
Modification of Surface Including Beams of Charged Particles and Photon and Plasma Fluxes |
Calculation of the equilibrium state and thermodynamic characteristics of plasma-forming gases and the plasma–“particle” system |
|
| Vol 57, No 5 (2016) |
Nanostructured Materials and Functional Coatings |
Electrodeposition of coatings of double carbides of tungsten and molybdenum from tungstate–molybdate–carbonate solutions |
|
| Vol 57, No 6 (2016) |
Mineral Processing of Nonferrous Metals |
The influence of the capillary pressure in nanobubbles on their attachment to particles during froth flotation: Part IV. Spreading nanobubbles as natural fractals |
|
| Vol 57, No 6 (2016) |
Metallurgy of Nonferrous Metals |
Mathematical modeling of the deoxidation kinetics of liquid blister copper with carbon |
|
| Vol 57, No 6 (2016) |
Metallurgy of Nonferrous Metals |
Recovering copper from volcanic ASH by NH3 · H2O–NH2COONH4 |
|
| Vol 57, No 6 (2016) |
Metallurgy of Nonferrous Metals |
Optimization of fluorination of the tungsten powder with fluorine in a reactor with an immobile layer with the provision of green requirements |
|
| Vol 57, No 6 (2016) |
Pressure Treatment of Metals |
Mathematical modeling of drawing rods made of titanium sponge allowing for pore formation |
|
| Vol 57, No 6 (2016) |
Pressure Treatment of Metals |
Finite element simulation of shot peening of an aluminum alloy considering hardening models |
|
| Vol 57, No 6 (2016) |
Physical Metallurgy and Heat Treatment |
Hardness, adhesion strength, and tribological properties of adaptive nanostructured ion-plasma vacuum-arc coatings (Ti,Al)N–Mo2N |
|
| Vol 57, No 6 (2016) |
Physical Metallurgy and Heat Treatment |
Formation of Cu–Pb alloys by means of liquid metal homogenization |
|
| Vol 57, No 6 (2016) |
Physical Metallurgy and Heat Treatment |
Parametric optimization of EDM process on α–β brass using Taguchi approach |
|
| Vol 57, No 6 (2016) |
Production Processes and Properties of Powders |
Preparation of tantalum powders by the reduction of complex oxyfluoride compounds with sodium |
|
| Vol 57, No 6 (2016) |
Self-Propagating High-Temperature Synthesis |
Influence of the synthesis conditions of boron carbide on its structural parameters |
|
| Vol 57, No 6 (2016) |
Refractory, Ceramic, and Composite Materials |
Regularities of the contact interaction of double carbides (Ti1 –nMenIV, V)C with the Ni–Mo melt |
|
| Vol 57, No 6 (2016) |
Porous Materials and Biomaterials |
The contact-free evaluation of porosity of nickel foam by 3D X-ray tomography |
|
| Vol 57, No 6 (2016) |
Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Fluxes |
Laser melt injection of austenitic cast iron Ch16D7GKh with titanium |
|
| Vol 57, No 6 (2016) |
Application of Powder Materials and Functional Coatings |
Influence of tin on the structure and hardness of metallic binders of diamond tools fabricated by composition brazing |
|
| Vol 57, No 6 (2016) |
Application of Powder Materials and Functional Coatings |
Superhydrophobic and anti-icing properties of sol–gel prepared alumina coatings |
|
| Vol 57, No 7 (2016) |
Mineral Processing of Nonferrous Metals |
Flotation study of oxide zinc ore using cationic-anionic mixed collectors |
|
| Vol 57, No 7 (2016) |
Metallurgy of Nonferrous Metals |
Electrical conductance, density, and the liquidus temperature of the KCl–PbCl2 equimolar mixture with lead oxide additives |
|
| Vol 57, No 7 (2016) |
Metallurgy of Rare and Noble Metals |
Single-stage production of the nickel concentrate with processing of the rhenium-containing refractory alloy |
|
| Vol 57, No 7 (2016) |
Metallurgy of Rare and Noble Metals |
World and Russian markets of arsenic |
|
| Vol 57, No 7 (2016) |
Metallurgy of Rare and Noble Metals |
Sorption recovery of rhodium(III) from multicomponent chloride solutions in the presence of tin(II) chloride |
|
| Vol 57, No 7 (2016) |
Foundry |
Determination of the heat-transfer coefficient between the AK7ch (A356) alloy casting and no-bake mold |
|
| Vol 57, No 7 (2016) |
Physical Metallurgy and Heat Treatment |
Effect of scandium on the phase composition and hardening of casting aluminum alloys of the Al–Ca–Si system |
|
| Vol 57, No 7 (2016) |
Physical Metallurgy and Heat Treatment |
Growth of (αTi) grain-boundary layers in Ti–Co alloys |
|
| Vol 57, No 7 (2016) |
Physical Metallurgy and Heat Treatment |
Obtaining nanopowder pseudo-ligatures Cu–(SiC+Si3N4) for modification and reinforcement of aluminum alloys |
|
| Vol 57, No 7 (2016) |
Theory and Processes of the Formation and Sintering of Powder Materials |
Role of bulk and mass effects of reactions in reaction sintering processes |
|
| Vol 57, No 7 (2016) |
Refractory, Ceramic, and Composite Materials |
Application of PAP-2 aluminum powder to produce powdered composite materials: The features of technology, structure, and physicomechanical properties of composites. Part I. Process approaches providing the formation of composite materials and applied procedures for determining their physicomechanical properties |
|
| Vol 57, No 7 (2016) |
Refractory, Ceramic, and Composite Materials |
The influence of volume fraction of SiC particles on the properties of Al/SiCp nanocomposites produced by powder metallurgy with high energy ball milling |
|
| Vol 57, No 7 (2016) |
Porous Materials and Biomaterials |
Influence of activation modes on the specific surface and development of a microporous structure of viscose-based carbon fibers |
|
| Vol 58, No 1 (2017) |
Mineral Processing of Nonferrous Metals |
Treatment of a Nigerian covellite ore. Part I: Dissolution kinetics study by ammonia solution |
|
| Vol 58, No 1 (2017) |
Metallurgy of Nonferrous Metals |
Synergistic effect of FeS and ZnS content on the separation of lead and antimony for PbS–Sb2S3–ZnS–FeS quaternary system under water vapor atmosphere |
|
| Vol 58, No 1 (2017) |
Metallurgy of Nonferrous Metals |
Hardness and electrical resistivity of Al–13 wt % Mg2Si pseudoeutectic alloy |
|
| Vol 58, No 1 (2017) |
Metallurgy of Nonferrous Metals |
Optimization of copper extraction from spent LTS catalyst (CuO–ZnO–Al2O3) using chelating agent: Box-behnken experimental design methodology |
|
| Vol 58, No 1 (2017) |
Metallurgy of Nonferrous Metals |
Modeling of electric and thermal fields in an electrolyzer with liquid-metal electrodes |
|
| Vol 58, No 1 (2017) |
Metallurgy of Nonferrous Metals |
Synthesis of hydrocarboaluminates of alkali earth metals from natural magnesium-containing feedstock in conditions of alumina production |
|
| Vol 58, No 1 (2017) |
Metallurgy of Rare and Noble Metals |
Environmentally safe fluoride cycle in tungsten technology. Substantiation of the production cycle with fluorine and hydrogen recycle |
|
| Vol 58, No 1 (2017) |
Metallurgy of Rare and Noble Metals |
Production of nickel–cobalt concentrate in rhenium-containing refractory alloy processing |
|
| Vol 58, No 1 (2017) |
Foundry |
Highly thermostable ceramic molds for shaped castings of titanium alloys |
|
| Vol 58, No 1 (2017) |
Foundry |
Influence of crystallization conditions on the structure and modifying ability of Al–Sc alloys |
|
| Vol 58, No 1 (2017) |
Pressure Treatment of Metals |
Application of combined casting–pressing for the fabrication of aluminum wire for soldering waveguides |
|
| Vol 58, No 1 (2017) |
Physical Metallurgy and Heat Treatment |
Properties of bulk metallic glasses |
|
| Vol 58, No 1 (2017) |
Erratum |
Erratum to: “Optimization of fluorination of the tungsten powder with fluorine in a reactor with an immobile layer with the provision of green requirements” |
|
| Vol 58, No 2 (2017) |
Mineral Processing of Nonferrous Metals |
Zeta potential of the surface of ultrafine sulfides and floatability of minerals |
|
| Vol 58, No 2 (2017) |
Mineral Processing of Nonferrous Metals |
Mineralogy, physical characterization and magnetic separation performance of a raw ilmenite concentrate for its purification |
|
| Vol 58, No 2 (2017) |
Metallurgy of Nonferrous Metals |
Motion dynamics of anodic gas in the cryolite melt–alumina high-temperature slurry |
|
| Vol 58, No 2 (2017) |
Foundry |
Determination of interface heat transfer coefficient between aluminum casting and graphite mold |
|
| Vol 58, No 2 (2017) |
Pressure Treatment of Metals |
Possibilities of a new cold upsetting method for increasing magnesium plastification |
|
| Vol 58, No 2 (2017) |
Physical Metallurgy and Heat Treatment |
The effect of the aging period on the martensitic transformation and kinetic characteristic of at % Cu68.09Al26.1Ni1.54Мn4.27 shape memory alloy |
|
| Vol 58, No 2 (2017) |
Physical Metallurgy and Heat Treatment |
Rheological properties of EP962NP nickel powdered superalloy under deformation in the two-phase region with industrial stamping rates and structural changes corresponding to deformation |
|
| Vol 58, No 2 (2017) |
Corrosion and Protection of Metals |
Investigation into the corrosion rate and features of the samples made of nanostructured aluminum alloy in the H2S-containing medium |
|
| Vol 58, No 2 (2017) |
Refractory, Ceramic, and Composite Materials |
The use of PAP-2 aluminum powder to fabricate powder composites: Peculiarities of technology, structure, and physicomechanical properties of composites. Part 2. Study of composite properties and structure |
|
| Vol 58, No 2 (2017) |
Nanostructured Materials and Functional Coatings |
Insight into physicomechanical and tribological properties of copper galvanic coatings formed with the addition of electroerosion copper nanopowder |
|
| Vol 58, No 2 (2017) |
Nanostructured Materials and Functional Coatings |
Preparation of nanosized zinc oxide by vacuum oxidation and kinetic study of oxidation |
|
| Vol 58, No 2 (2017) |
Application of Powder Materials and Functional Coatings |
Influence of the matrix composition, structure, and properties on the service life of a diamond drilling tool |
|
| Vol 58, No 3 (2017) |
Mineral Processing of Nonferrous Metals |
Application of immiscible magnetic liquids of different densities as the separation medium for magnetic liquid separation |
|
| Vol 58, No 3 (2017) |
Mineral Processing of Nonferrous Metals |
The effect of particle size, irrigation rate and aeration rate on column bioleaching of uranium ore |
|
| Vol 58, No 3 (2017) |
Mineral Processing of Nonferrous Metals |
Investigation into flotation properties of new collectors when concentrating scheelite–sulfide ores |
|
| Vol 58, No 3 (2017) |
Metallurgy of Nonferrous Metals |
Principal processing flowsheet of copper–brass wastes of metallurgical brass production |
|
| Vol 58, No 3 (2017) |
Metallurgy of Nonferrous Metals |
Improving the precipitation of arsenic trisulfide from washing waters of sulfuric-acid production of copper smelteries |
|
| Vol 58, No 3 (2017) |
Metallurgy of Nonferrous Metals |
Effect of titanium additives on carbon anode reactivity |
|
| Vol 58, No 3 (2017) |
Metallurgy of Rare and Noble Metals |
Sorption technology of recovery of indium from solutions of zinc production |
|
| Vol 58, No 3 (2017) |
Foundry |
Investigation of operational characteristics of special-purpose alloy castings |
|
| Vol 58, No 3 (2017) |
Foundry |
Influence of orbital shaking on microstructure and mechanical properties of A380 aluminium alloy produced by lost foam casting |
|
| Vol 58, No 3 (2017) |
Physical Metallurgy and Heat Treatment |
Boriding of titanium OT4 from powder saturating media |
|
| Vol 58, No 3 (2017) |
Pressure Treatment of Metals |
Computational methods of the superplastic forming duration of a round membrane |
|
| Vol 58, No 3 (2017) |
Energy Saving and Environmental Protection |
Feasibility study for recovering waste heat in reduction system of Kroll process: Energy analysis and economic valuation |
|
| Vol 58, No 3 (2017) |
Production Processes and Properties of Powders |
Microstructures and mechanical properties in powder-based additive manufacturing of a nickel-based alloy |
|
| Vol 58, No 3 (2017) |
Production Processes and Properties of Powders |
A comparative study on physicochemical properties of hydroxyapatite powders derived from natural and synthetic sources |
|
| Vol 58, No 3 (2017) |
Production Processes and Properties of Powders |
Electrochemical synthesis of powders of holmium and nickel intermetallic compounds in halogenide melts |
|
| Vol 58, No 3 (2017) |
Production Processes and Properties of Powders |
Preparation methods and production of initial materials to prepare gadolinium oxide pellets used in fabrication of composite uranium–gadolinium fuel |
|
| Vol 58, No 3 (2017) |
Theory and Processes of Formation and Sintering of Powder Materials |
Identification of the modified Drucker–Prager yield condition and modeling of compaction of the plasticized titanium feedstock |
|
| Vol 58, No 3 (2017) |
Self-Propagating High-Temperature Synthesis |
Reaction synthesis of the Ti2AlN MAX-phase |
|
| Vol 58, No 3 (2017) |
Self-Propagating High-Temperature Synthesis |
Role of powder precursors in production of composite alloys using liquid-phase methods |
|
| Vol 58, No 3 (2017) |
Nanostructured Materials and Functional Coatings |
Temperature dependence of heat capacity of Fe–M powder nanomaterials (M—C, Ge, Sn) |
|
| Vol 58, No 4 (2017) |
Mineral Processing of Nonferrous Metals |
Beneficiation of antimony oxide ore: A review |
|
| Vol 58, No 4 (2017) |
Mineral Processing of Nonferrous Metals |
Improving microdisintegration processes of sands of an integrated deposit of precious metals with high strength characteristics |
|
| Vol 58, No 4 (2017) |
Mineral Processing of Nonferrous Metals |
Influence of the capillary pressure in nanobubbles on their adherence to particles during froth flotation: Part 5. Spreading curves of nanobubbles on the surface with different wettability |
|
| Vol 58, No 4 (2017) |
Metallurgy of Nonferrous Metals |
Investigation into regularities of leaching sulfated cinders of roasting copper–zinc middlings |
|
| Vol 58, No 4 (2017) |
Metallurgy of Nonferrous Metals |
Study on the extraction mechanism and thermodynamics of Pb(II) with a o-phenylendiamine tetraacetic acid |
|
| Vol 58, No 4 (2017) |
Metallurgy of Rare and Noble Metals |
Extraction of selenium from copper anode slimes in a sealed leaching system |
|
| Vol 58, No 4 (2017) |
Metallurgy of Rare and Noble Metals |
Sorption recovery of gallium and aluminum from alkaline solutions on an AN-31 anion exchanger |
|
| Vol 58, No 4 (2017) |
Foundry |
Influence of temperatures of melt overheating and pouring on the quality of aluminum alloy lost foam castings |
|
| Vol 58, No 4 (2017) |
Foundry |
Influence of modifiers on the change of mechanical properties of silumins |
|
| Vol 58, No 4 (2017) |
Pressure Treatment of Metals |
Pressing prismatic and screw profiles from copper M4 |
|
| Vol 58, No 4 (2017) |
Theory and Processes of Forming and Sintering of Powder Materials |
Anisotropy of mechanical properties of products manufactured using selective laser melting of powdered materials |
|
| Vol 58, No 4 (2017) |
Self-Propagating High-Temperature Synthesis |
Dynamics of phase formation during the synthesis of magnesium diboride from elements in thermal explosion mode |
|
| Vol 58, No 4 (2017) |
Self-Propagating High-Temperature Synthesis |
Structure and phase formation of combustion products during the synthesis of γ-AlON in self-propagating high-temperature synthesis |
|
| Vol 58, No 4 (2017) |
Self-Propagating High-Temperature Synthesis |
Synthesis and structural characterization of nanocrystalline Ni50Al50 − xMox intermetallic compound prepared by mechanical alloying |
|
| Vol 58, No 4 (2017) |
Refractory, Ceramic, and Composite Materials |
Influence of alloying the TiC0.5N0.5 carbonitride with zirconium on an interaction mechanism with the Ni–Mo melt |
|
| Vol 58, No 4 (2017) |
Refractory, Ceramic, and Composite Materials |
Ultrasonic effect on the penetration of the metallic melt into submicron particles and their agglomerates |
|
| Vol 58, No 4 (2017) |
Refractory, Ceramic, and Composite Materials |
Effect of various sintering methods on microstructures and mechanical properties of titanium and its alloy (Ti–Al–V–X): A review |
|
| Vol 58, No 4 (2017) |
Nanostructured Materials and Functional Coatings |
Trying out spraying modes and properties of wear-resistant flame Al2O3–TiO2 coatings fabricated using a flexible cord material |
|
| Vol 58, No 5 (2017) |
Metallurgy of Nonferrous Metals |
Using acoustic field energy to decrease dust discharge from the working space of the Vanyukov furnace |
|
| Vol 58, No 5 (2017) |
Metallurgy of Rare and Noble Metals |
An increase in purity of ammonium perrhenate solutions with respect to molybdenum(IV) with the sorption recovery of rhenium(VII) from Mo-containing solutions |
|
| Vol 58, No 5 (2017) |
Foundry |
Influence of melting conditions of aluminum alloys on the properties and quality of castings obtained by lost foam casting |
|
| Vol 58, No 5 (2017) |
Foundry |
Influence of various types of treatment on the structure, density, and electrical conductivity of deformed alloys of the Al–Mg system |
|
| Vol 58, No 5 (2017) |
Foundry |
Simulation of the temperature distribution on the mold surface and inside casting during high-gradient directional solidification |
|
| Vol 58, No 5 (2017) |
Foundry |
Investigation of spherisation in microstructures of aluminium casting alloys for thixoforging process |
|
| Vol 58, No 5 (2017) |
Pressure Treatment of Metals |
Calculation of parameters of drawing-out the half-sphere parts in the stamp with an elastic element |
|
| Vol 58, No 5 (2017) |
Physical Metallurgy and Heat Treatment |
Effect of bake hardening treatment on the mechanical behaviors of aluminum alloy spot welding joints |
|
| Vol 58, No 5 (2017) |
Physical Metallurgy and Heat Treatment |
Development and characterization of Nickel–Titanium–Zirconium shape memory alloy for engineering applications |
|
| Vol 58, No 5 (2017) |
Corrosion and Protection of Metals |
Corrosion behavior on the different zones of AA2014 welded aluminum alloy by AA5554 filler aluminum alloy with TIG process: Before and after solution heat treatments followed by ageing |
|
| Vol 58, No 5 (2017) |
Production Processes and Properties of Powders |
Investigation into the solubility of nanopowders of the ZrO2–Y2O3–CeO2–Al2O3 system in the aqueous medium at various pH |
|
| Vol 58, No 5 (2017) |
Self-Propagating High-Temperature Synthesis |
Nanomaterials of SHS technology for tribological applications: A review |
|
| Vol 58, No 5 (2017) |
Self-Propagating High-Temperature Synthesis |
Study of the mechanism and regularities of nitriding the complex ferrosilicoaluminum ferroalloy in the SHS mode |
|
| Vol 58, No 5 (2017) |
Refractory, Ceramic, and Composite Materials |
Revisiting the structure of SiC–B4C–MedB2 systems and prospects for the development of composite ceramic materials based on them |
|
| Vol 58, No 5 (2017) |
Refractory, Ceramic, and Composite Materials |
Experimental investigations and thermodynamic calculations of the structural and phase composition in the Ti–Si–C system |
|
| Vol 58, No 6 (2017) |
Mineral Processing of Nonferrous Metals |
Sorption of Rhenium from Concentration Products of Placers of Concentrate Gold by Magnetic Liquid Separation |
|
| Vol 58, No 6 (2017) |
Mineral Processing of Nonferrous Metals |
Chemical Composition and Structure of Oxidation Product Layer on the Carrollite Surface during Bioleaching |
|
| Vol 58, No 6 (2017) |
Metallurgy of Nonferrous Metals |
Phase Equilibria in Liquid Metal of the Cu–Al–Cr–O System |
|
| Vol 58, No 6 (2017) |
Metallurgy of Nonferrous Metals |
Thermodynamic Analysis of Zinc Ferrite Decomposition in Electric Arc Furnace Dust by Lime |
|
| Vol 58, No 6 (2017) |
Metallurgy of Nonferrous Metals |
Improving the Estimation Accuracy of Copper Oxide Leaching in an Ammonia–Ammonium System Using RSM and GA-BPNN |
|
| Vol 58, No 6 (2017) |
Metallurgy of Rare and Noble Metals |
Preparation of V2O5 from Ammonium Metavanadate via Microwave Intensification |
|
| Vol 58, No 6 (2017) |
Metallurgy of Rare and Noble Metals |
Sorption of Rhenium from Sulfuric Acid Solutions with Trialkylamine-Containing Impregnates |
|
| Vol 58, No 6 (2017) |
Metallurgy of Rare and Noble Metals |
Separation of Yttrium from Aqueous Solution Using Ionic Imprinted Polymers |
|
| Vol 58, No 6 (2017) |
Foundry |
Effect of Composition and Distribution of Phases after Aging on Stamp Ability for Aluminum Alloy D16 (AA2014) Sheets |
|
| Vol 58, No 6 (2017) |
Pressure Treatment of Metals |
A Study of Plastic Deformation Behavior of AA1050 Aluminum Alloy during Pure Shear Extrusion with Back Pressure |
|
| Vol 58, No 6 (2017) |
Physical Metallurgy and Heat Treatment |
Structural Features of Al–Hf–Sc Master Alloys |
|
| Vol 58, No 6 (2017) |
Corrosion and Protection of Metals |
Comparison of the Tendency to Pitting Corrosion of Casting of Al6Ca, Al1Fe, and Al6Ca1Fe Experimental Alloys and AK12M2 Industrial Alloy |
|
| Vol 58, No 6 (2017) |
Refractory, Ceramic, and Composite Materials |
Investigation into the Structure Formation and Properties of Materials in the Copper–Titanium Disilicide System |
|
| Vol 58, No 6 (2017) |
Refractory, Ceramic, and Composite Materials |
Tribological and Mechanical Properties of Al(Cu)/MWCNT Nanocomposite Prepared by Mechanical Alloying and Hot Extrusion |
|
| Vol 58, No 6 (2017) |
Porous Materials and Biomaterials |
Surface Composition and Structure of Highly Porous Materials Based Zirconia Stabilized with Yttria |
|
| Vol 58, No 6 (2017) |
Porous Materials and Biomaterials |
Fabrication, Structure, and Properties of Porous Materials Made of Titanium Fibers and Wire |
|
| Vol 58, No 6 (2017) |
Nanostructured Materials and Functional Coatings |
Evaluation of Thermal Stability of Multilayered Nanostructured Coatings Based on Analysis of Diffusion Mobility of Components of the Layers |
|
| Vol 59, No 1 (2018) |
Mineral Processing of Nonferrous Metals |
Quantum-Chemical Substantiation of Properties of a Bioreagent Oxidizing Nonferrous Metal Sulfides |
|
| Vol 59, No 1 (2018) |
Mineral Processing of Nonferrous Metals |
Physical Methods and Flotation Practice in the Beneficiation of a Low Grade Tungsten-Bearing Scheelite Ore |
|
| Vol 59, No 1 (2018) |
Mineral Processing of Nonferrous Metals |
Mineralogical Characterisation of an Ag–In-Bearing Polymetallic Ore with Regard to Its Mineral Separation Behaviour |
|
| Vol 59, No 1 (2018) |
Mineral Processing of Nonferrous Metals |
An Experimental Investigation on the Copper Recovery from Flotation Tailing Dams by Reflotation |
|
| Vol 59, No 1 (2018) |
Foundry |
The Influence of Composition and Heat Treatment on the Phase Composition and Mechanical Properties of ML19 Magnesium Alloy |
|
| Vol 59, No 1 (2018) |
Foundry |
SHS Metallurgy of Composite Materials Based on the Nb–Si System |
|
| Vol 59, No 1 (2018) |
Foundry |
A Novel Developed Grain Refiner (Al–Y–B Master Alloys) Using Yttrium and KBF4 Powders |
|
| Vol 59, No 1 (2018) |
Pressure Treatment of Metals |
Investigation into the Formation of Texture, Microstructure, and Anisotropy of Properties during Rolling Sheets of the Aluminum–Lithium 1420 Alloy |
|
| Vol 59, No 1 (2018) |
Pressure Treatment of Metals |
Development of Fabrication Modes of Deformed Semifinished Products from the Experimental Scandium-Containing Aluminum Alloy and Investigation into Their Mechanical Properties |
|
| Vol 59, No 1 (2018) |
Pressure Treatment of Metals |
Combined Effect of Calcium and Silicon on the Phase Composition and Structure of Al–10%Mg Alloy |
|
| Vol 59, No 1 (2018) |
Physical Metallurgy and Heat Treatment |
Kinetics and High-Temperature Oxidation Mechanism of Ceramic Materials in the ZrB2–SiC–MoSi2 System |
|
| Vol 59, No 1 (2018) |
Physical Metallurgy and Heat Treatment |
Effect of Welding Speed on Gas Metal Arc Weld Pool in Commercially Pure Aluminum: Theoretically and Experimentally |
|
| Vol 59, No 1 (2018) |
Physical Metallurgy and Heat Treatment |
Microstructural and Mechanical Characterization of as Weld and Aged Conditions of AA2219 Aluminium Alloy by Gas Tungsten Arc Welding Process |
|
| Vol 59, No 1 (2018) |
Physical Metallurgy and Heat Treatment |
Protective Coatings La–Mn–Cu–O for Stainless-Steel Interconnector 08Х17Т for SOFC, Obtained by the Electrocrystallization Method from Non-Aqueous Solutions |
|
| Vol 59, No 1 (2018) |
Self-Propagating High-Temperature Synthesis |
Fabrication of Cerium Oxide Nanoparticles by Solution Combustion Synthesis and Their Cytotoxicity Evaluation |
|
| Vol 59, No 1 (2018) |
Refractory, Ceramic, and Composite Materials |
Reaction Pathways of Nanocomposite Synthesized in-situ from Mechanical Activated Al–C–TiO2 Powder Mixture |
|
| Vol 59, No 2 (2018) |
Metallurgy of Nonferrous Metals |
Sulfuric Containing Sugar Bath and Permanent Weak Magnetic Field Effect during Anodizing AlCu6Si Alloy Sheet Surfaces |
|
| Vol 59, No 2 (2018) |
Metallurgy of Nonferrous Metals |
Forecasting Tribological Properties of Wrought AZ91D Magnesium Alloy Using Soft Computing Model |
|
| Vol 59, No 2 (2018) |
Metallurgy of Nonferrous Metals |
Direct Calcification–Carbonation Method for Processing of Bayer Process Red Mud |
|
| Vol 59, No 2 (2018) |
Physical Metallurgy and Heat Treatment |
Forecasting Mechanical Properties of Forgings of VT6 and VT3-1 Titanium Alloys Depending on the Chemical Composition and Structure |
|
| Vol 59, No 2 (2018) |
Physical Metallurgy and Heat Treatment |
Effect of Heat Treatment on the Structure and Properties of Sheet Semifinished Products Made of a Heat-Resistant Alloy Based on Titanium and Alloyed with Rare-Earth Metal |
|
| Vol 59, No 2 (2018) |
Physical Metallurgy and Heat Treatment |
Rheological Properties of the EP742-ID Alloy in the Context of Integrated Computational Materials Science and Engineering: Part I. Results of Experimental Investigations |
|
| Vol 59, No 2 (2018) |
Physical Metallurgy and Heat Treatment |
Rheological Properties of the EP742-ID Alloy in the Context of Integrated Computational Materials Science and Engineering: Part II. Modeling the Compression Process of the Samples and Virtual Billets |
|
| Vol 59, No 2 (2018) |
Physical Metallurgy and Heat Treatment |
Controlling the Phase Composition, Structure, and Complex of Properties of the High-Modulus Titanium Alloy by Thermohydrogen Processing |
|
| Vol 59, No 2 (2018) |
Physical Metallurgy and Heat Treatment |
Influence of the Chemical Composition and Heat Treatment Modes on the Phase Composition and Mechanical Properties of the ZK51A (ML12) Alloy |
|
| Vol 59, No 2 (2018) |
Physical Metallurgy and Heat Treatment |
Investigation into the Fabrication Possibility of the Boron–Aluminum Sheet Rolling of Increased Strength without Using Homogenization and Quenching |
|
| Vol 59, No 2 (2018) |
Refractory, Ceramic, and Composite Materials |
Microstructural Evolution, Powder Characteristics, Compaction Behavior and Sinterability of Al 6061–B4C Composites as a Function of Reinforcement Content and Milling Times |
|
| Vol 59, No 3 (2018) |
Mineral Processing of Nonferrous Metals |
Synthesis of Hydroxylated Xanthate Salt and Its Use as Novel Selective Depressant in Copper-Molybdenum Separation |
|
| Vol 59, No 3 (2018) |
Mineral Processing of Nonferrous Metals |
Recovery of Silicon and Iron Oxides from Alumina-Containing Sweepings of Aluminum Production |
|
| Vol 59, No 3 (2018) |
Metallurgy of Nonferrous Metals |
The Use of Antimony Trioxide in Copper Electrolyte Purification and Its Subsequent Regeneration: An Experimental and Mechanistic Study |
|
| Vol 59, No 3 (2018) |
Metallurgy of Nonferrous Metals |
Influence of Thermal Treatment on Copper Extraction from Electronic Wastes |
|
| Vol 59, No 3 (2018) |
Metallurgy of Nonferrous Metals |
Producing Metallic Antimony with Low Arsenic Content from Antimony Concentrate |
|
| Vol 59, No 3 (2018) |
Metallurgy of Rare and Noble Metals |
Substitution Recovery of Gold from Copper-Ethylenediamine-Thiosulfate Leaching Solution with Copper Power |
|
| Vol 59, No 3 (2018) |
Foundry |
Influence of the Magnetic Field on the Crystallization of Aluminum Melts |
|
| Vol 59, No 3 (2018) |
Physical Metallurgy and Heat Treatment |
Influence of a Silicon Additive on Resistivity and Hardness of the Al–1% Fe–0.3% Zr Alloy |
|
| Vol 59, No 3 (2018) |
Physical Metallurgy and Heat Treatment |
Use of Calcium in Alloys: From Modifying to Alloying |
|
| Vol 59, No 3 (2018) |
Production Processes and Properties of Powders |
Mathematical Model of the Melt Impregnation of Metal Powder Using Vibration Treatment |
|
| Vol 59, No 3 (2018) |
Production Processes and Properties of Powders |
Structure and Properties of Dysprosium Titanate Powder Produced by the Mechanochemical Method |
|
| Vol 59, No 3 (2018) |
Self-Propagating High-Temperature Synthesis |
Features of Production and High-Temperature Oxidation of SHS Ceramics Based on Zirconium Boride and Zirconium Silicide |
|
| Vol 59, No 3 (2018) |
Self-Propagating High-Temperature Synthesis |
Synthesis of Ceramic Materials Based on Titanium Carbide with a Cobalt Binder for the Pulsed Electrospark Deposition of Bioactive Coatings with an Antibacterial Effect |
|
| Vol 59, No 3 (2018) |
Refractory, Ceramic, and Composite Materials |
Experience in Improving the Manufacturing Properties of Semifinished Products and Quality of Thoriated Tungsten Products by the Deposition of Tungsten Coatings with WF6 Hydrogen Reduction |
|
| Vol 59, No 3 (2018) |
Nanostructured Materials and Functional Coatings |
Thermodynamic Assessment of the Possibility of the Deposition of Silicon Borides from Their Halogenides |
|
| Vol 59, No 3 (2018) |
Application of Powder Materials and Functional Coatings |
Development of a Next Generation of Diamond Tools Based on Superhard Materials with a Nanomodified Binder for Steel and Cast Iron Machining |
|
| Vol 59, No 4 (2018) |
Mineral Processing of Nonferrous Metals |
A Beneficiation Study on a Low Grade Iron Ore by Gravity and Magnetic Separation |
|
| Vol 59, No 4 (2018) |
Mineral Processing of Nonferrous Metals |
Rational Processing of Refractory Copper-Bearing Ores |
|
| Vol 59, No 4 (2018) |
Metallurgy of Rare and Noble Metals |
Problems of Analytical Control in the Production of Rare and Precious Metals |
|
| Vol 59, No 4 (2018) |
Foundry |
Effects of Indium Content on Microstructural, Mechanical Properties and Melting Temperature of SAC305 Solder Alloys |
|
| Vol 59, No 4 (2018) |
Pressure Treatment of Metals |
Regularities of Formation and Degradation of the Microstructure and Properties of New Ultrafine-Grained Low-Modulus Ti–Nb–Mo–Zr Alloys |
|
| Vol 59, No 4 (2018) |
Physical Metallurgy and Heat Treatment |
Structure and Magnetic Properties of WC–50% Co Model Alloys Containing TaC Additives |
|
| Vol 59, No 4 (2018) |
Physical Metallurgy and Heat Treatment |
Investigation into the Possibility of Fabricating Boraluminum Rolling of Increased Strength without Homogenization and Quenching |
|
| Vol 59, No 4 (2018) |
Physical Metallurgy and Heat Treatment |
Foundations of the Fabrication Technology of Wear-Resistant Coatings Made of Mixtures of Chromium Carbide Powders with a Metallic Binder by Explosive Pressing |
|
| Vol 59, No 4 (2018) |
Production Processes and Properties of Powders |
Characterization of Ni–Ti Alloy Powders for Use in Additive Manufacturing |
|
| Vol 59, No 4 (2018) |
Self-Propagating High-Temperature Synthesis |
Experimental Study of Combustion Synthesis in Air of ZrB2-Mullite Composite from Different Zirconium Silicate Sources |
|
| Vol 59, No 4 (2018) |
Self-Propagating High-Temperature Synthesis |
Fabrication of Metallic Powders for Energy-Intensive Combustible Compositions by Mechanochemical Treatment: 1. Peculiarities of the Structure and State of Aluminum Powder Particles Formed by Mechanochemical Treatment |
|
| Vol 59, No 4 (2018) |
Refractory, Ceramic, and Composite Materials |
Synthesis, Corrosion and Bioactivity Evaluation of Gelatin/Silicon and Magnesium Co-Doped Fluorapatite Nanocomposite Coating Applied on AZ31 Mg Alloy |
|
| Vol 59, No 5 (2018) |
Metallurgy of Nonferrous Metals |
Sorption of Fluoride Ions by Iron Oxyhydrate Fixed on the Carriers Part I. Organic Carriers |
|
| Vol 59, No 5 (2018) |
Metallurgy of Nonferrous Metals |
Influence of Electrolyte Overheating and Composition on the Sideledge of an Aluminum Bath |
|
| Vol 59, No 5 (2018) |
Metallurgy of Nonferrous Metals |
Ammoniacal Dissolution of Polymetallic Alloy Produced from Waste Electroscrap |
|
| Vol 59, No 5 (2018) |
Metallurgy of Nonferrous Metals |
Research on the Electrochemical Behavior of Si(IV) on the Tungsten Electrode in CaCl2–CaF2–CaO Molten Melt |
|
| Vol 59, No 5 (2018) |
Metallurgy of Nonferrous Metals |
Roasting Pre-Treatment of High-Sulfur Bauxite for Sulfide Removal and Digestion Performance of Roasted Ore |
|
| Vol 59, No 5 (2018) |
Metallurgy of Rare and Noble Metals |
Certain Tendencies in the Rare-Earth-Element World Market and Prospects of Russia |
|
| Vol 59, No 5 (2018) |
Foundry |
Influence of Methods of Producing the AlTi Master Alloy on Its Structure and Efficiency in the Grain Refinement of Aluminum Alloy |
|
| Vol 59, No 5 (2018) |
Physical Metallurgy and Heat Treatment |
Influence of Annealing at Various Temperatures on the Structure and Hardness of Amorphous Ribbons of the Al85Y8Ni5Co2 Alloy |
|
| Vol 59, No 5 (2018) |
Physical Metallurgy and Heat Treatment |
Development of Composite Bronzes Reinforced by Steel Dendrites |
|
| Vol 59, No 5 (2018) |
Energy and Resource Saving |
Removal of Hexavalent Chromium from Mine Effluents by Ion Exchange Resins-Comparative Study of Amberlite IRA 400 and IRA 900 |
|
| Vol 59, No 5 (2018) |
Theory and Processes of Forming and Sintering of Powder Materials |
Formation of Amorphous Structures and Their Crystallization in the Cu–Ti System by High-Energy Ball Milling |
|
| Vol 59, No 5 (2018) |
Theory and Processes of Forming and Sintering of Powder Materials |
Revisiting the Possibility of Formation of Hard Alloys from Powder Mixtures of Carbides with Metals by Explosive Compacting without Sintering |
|
| Vol 59, No 5 (2018) |
Theory and Processes of Forming and Sintering of Powder Materials |
Reducing the Metal Content in PCD Polycrystalline Diamond Layer by Chemical and Electrochemical Etching |
|
| Vol 59, No 5 (2018) |
Theory and Processes of Forming and Sintering of Powder Materials |
Variation in Strength, Hardness, and Fracture Toughness in Transition from Medium-Grained to Ultrafine Hard Alloy |
|
| Vol 59, No 5 (2018) |
Self-Propagating High-Temperature Synthesis |
SHS Metallurgy of Cr2AlC MAX Phase-Based Cast Materials |
|
| Vol 59, No 5 (2018) |
Self-Propagating High-Temperature Synthesis |
Research into the Possibility of Producing Single-Phase Tantalum–Hafnium Carbide by SHS |
|
| Vol 59, No 5 (2018) |
Self-Propagating High-Temperature Synthesis |
Features of Microstructure Formation in the Ni–Al–W System during SHS |
|
| Vol 59, No 6 (2018) |
Metallurgy of Nonferrous Metals |
Study on Pure Mercurous Chloride Leaching with Sodium Thiosulfate |
|
| Vol 59, No 6 (2018) |
Metallurgy of Nonferrous Metals |
Experimental and Kinetic Study of Magnesium Extraction and Leaching from Laterite Nickel Ore by Roasting with Ammonium Sulfate |
|
| Vol 59, No 6 (2018) |
Metallurgy of Rare and Noble Metals |
Solvent Extraction of Copper Using TBP, D2EHPA and MIBK |
|
| Vol 59, No 6 (2018) |
Metallurgy of Rare and Noble Metals |
Investigation into the Carbothermic Method of Digestion of Titanium Raw Materials by the Example of Artificially Synthesized Perovskite |
|
| Vol 59, No 6 (2018) |
Foundry |
Prediction of Misruns in ML5 (AZ91) Alloy Casting and Alloy Fluidity Using Numerical Simulation |
|
| Vol 59, No 6 (2018) |
Foundry |
Investigation into the Structure and Properties of Solders Based on Aluminum and Zinc in the Form of Cast Rods of a Small Cross Section |
|
| Vol 59, No 6 (2018) |
Pressure Treatment of Metals |
Simulation of the Final Stage of the Direct Extrusion Method of Large-Size Rods at Small Elongations |
|
| Vol 59, No 6 (2018) |
Physical Metallurgy and Heat Treatment |
Study of the Structural Evolution of a Two-Phase Titanium Alloy during Thermodeformation Treatment |
|
| Vol 59, No 6 (2018) |
Theory and Processes of Forming and Sintering of Powder Materials |
Contact Interaction Peculiarities at the Boundary of Layers of Structural Steel–High-Speed Steel Hot-Forged Powder Bimetal |
|
| Vol 59, No 6 (2018) |
Theory and Processes of Forming and Sintering of Powder Materials |
Experimental and Computational Determination of the Heating Temperature of a Powder Mixture during Explosive Compaction |
|
| Vol 59, No 6 (2018) |
Self-Propagating High-Temperature Synthesis |
Conductive TiB2–AlN–BN-Based Composite SHS Ceramics |
|
| Vol 59, No 6 (2018) |
Refractory, Ceramic, and Composite Materials |
Regularities of Metallurgical Reactions of Ti1 –n\({\text{Me}}_{n}^{{\text{V}}}\)C0.5N0.5 Carbonitrides with the Ni–Mo Melt |
|
| Vol 59, No 6 (2018) |
Refractory, Ceramic, and Composite Materials |
Fabrication of the Nb–16Si Alloy Powder for Additive Technologies by Mechanical Alloying and Spheroidization in Electric-Arc Discharge Thermal Plasma |
|
| Vol 59, No 6 (2018) |
Refractory, Ceramic, and Composite Materials |
Development of the Aluminum Powder Composite Based on the Al–Si–Ni System and Technology of Billet Fabrication of This Composite |
|
| Vol 59, No 6 (2018) |
Materials and Coatings Fabricated by Additive Technologies |
Comparative Study of the Structural-Phase State and Mechanical Properties of Ni–Cr(X) and Fe–Cr(X) Heat-Resistant Alloys Fabricated by Additive Technologies |
|
| Vol 59, No 6 (2018) |
Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Fluxes |
Investigation into the X-Radiation Effect on the Structure and Microhardness of the Tungsten Powder-Filled Composite |
|
| Vol 59, No 6 (2018) |
Nanostructured Materials and Functional Coatings |
Structure, Mechanical Properties, and Oxidation Resistance of MoSi2, MoSiB, and MoSiB/SiBC Coatings |
|
| Vol 59, No 6 (2018) |
Nanostructured Materials and Functional Coatings |
Conceptual Protection Model for Especially Heat-Proof Materials in Hypersonic Oxidizing Gas Flows |
|
| Vol 60, No 1 (2019) |
Metallurgy of Nonferrous Metals |
Research into the Influence of Process Parameters on the Efficiency of Zinc Electrolysis from Alkaline Solutions |
|
| Vol 60, No 1 (2019) |
Metallurgy of Nonferrous Metals |
Processing the Sb–Pb–Ag Alloy by the Distillation Method |
|
| Vol 60, No 1 (2019) |
Metallurgy of Rare and Noble Metals |
Developmental Prospects of the Methods for Synthesizing Titanates of the Perovskite-Type Structure and Their Doping with Rare-Earth Elements |
|
| Vol 60, No 1 (2019) |
Pressure Treatment of Metals |
Computer Simulation of Mannesmann Piercing of Aluminium Alloy Ingots |
|
| Vol 60, No 1 (2019) |
Pressure Treatment of Metals |
Investigation into the Influence of the Degree of Grinding of the Ingot Grain Structure of the 6063 Alloy on Its Plasticity, Extruding Parameters, and Properties of Extruded Profiles |
|
| Vol 60, No 1 (2019) |
Foundry |
Application of Recycling Products of Aluminum Slags in Investment Casting Technology |
|
| Vol 60, No 1 (2019) |
Energy Saving |
An Alternative Technique for the Extraction of Valuable Elements from Fly Ash: the Carbochlorination Method |
|
| Vol 60, No 1 (2019) |
Self-Propagating High-Temperature Synthesis |
Phase Formation in the Ti–Al–C System during SHS |
|
| Vol 60, No 1 (2019) |
Refractory, Ceramic, and Composite Materials |
Investigation into the Peculiarities of Structure Formation and Properties of Copper-Based Powder Pseudoalloys Modified by ZnO and TiN Nanoparticle Additives |
|
| Vol 60, No 1 (2019) |
Refractory, Ceramic, and Composite Materials |
Development of the Production Technology of Cast Aluminum Matrix Composite by Alumina Strengthening Phase Synthesis in an Aluminum Melt |
|
| Vol 60, No 1 (2019) |
Refractory, Ceramic, and Composite Materials |
Peculiarities of Granulation of the PAP-2 Aluminum Powder in the Technology of the Al–Al2O3 Powder Composite with a Layered Structure |
|
| Vol 60, No 1 (2019) |
Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Fluxes |
Peculiarities of the Microstructure and Properties of Parts Produced by the Direct Laser Deposition of 316L Steel Powder |
|
| Vol 60, No 1 (2019) |
Nanostructured Materials and Functional Coatings |
Sedimentation of Ultradispersed Diamonds in the Citrate Copper-Plating Electrolyte |
|
| Vol 60, No 1 (2019) |
Application of Powder Materials and Functional Coatings |
Prospects of Production and Application of Hybrid Structures and Composites Made of Titanium Alloys and Nitinol: Overview |
|
| Vol 60, No 2 (2019) |
Mineral Processing of Nonferrous Metals |
Effect of Clay Slime on the Froth Stability and Flotation Performance of Bastnaesite with Different Particle Sizes |
|
| Vol 60, No 2 (2019) |
Metallurgy of Nonferrous Metals |
Utilization of Industrial Liquid-Waste Effluents of the Titanium–Magnesium Production |
|
| Vol 60, No 2 (2019) |
Metallurgy of Nonferrous Metals |
Corrosion of Carbon Steel and Cast Iron in a Gas Phase over Salt Melts Used in the Magnesium Industry |
|
| Vol 60, No 2 (2019) |
Metallurgy of Nonferrous Metals |
Temperature Dependence of Heat Capacity and the Variation in Thermodynamic Function of the AZh 4.5 Alloy Doped with Tin |
|
| Vol 60, No 2 (2019) |
Pressure Treatment of Metals |
Analysis of the Scheme of Nonequal Channel Angular Pressing as Applied to the Formation of Sheet Magnesium in a Cold State |
|
| Vol 60, No 2 (2019) |
Pressure Treatment of Metals |
Manufacturing Process and Interface Properties of Vacuum Rolling Large-Area Titanium-Steel Cladding Plate |
|
| Vol 60, No 2 (2019) |
Physical Metallurgy and Heat Treatment |
Cold Sintering of Fe–Ag and Fe–Cu Nanocomposites by Consolidation in the High-Pressure Gradient |
|
| Vol 60, No 2 (2019) |
Physical Metallurgy and Heat Treatment |
Peculiarities of the Synthesis of High-Temperature TaSi2–SiC Ceramics Reinforced in situ by Discrete Silicon Carbide Nanofibers |
|
| Vol 60, No 2 (2019) |
Production Processes and Properties of Powders |
Preparation of Zinc Powders by Acid Electrowinning |
|
| Vol 60, No 2 (2019) |
Refractory, Ceramic, and Composite Materials |
Synthesis and Properties of Composites Based on Zirconium and Chromium Borides |
|
| Vol 60, No 2 (2019) |
Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Fluxes |
Selective Laser Melting of the Intermetallic Titanium Alloy |
|
| Vol 60, No 2 (2019) |
Nanostructured Materials and Functional Coatings |
Study of a Nanostructured Anatase Coating on the Rutile Surface |
|
| Vol 60, No 2 (2019) |
Nanostructured Materials and Functional Coatings |
Phase Composition and Wear Resistance of Coatings Formed on the VT6 Titanium Alloy by Plasma Electrolytic Oxidation |
|
| Vol 60, No 2 (2019) |
Nanostructured Materials and Functional Coatings |
Investigation into the Structure and Oxidation Mechanism of FeAlCr/Al2O3 Detonation Spraying Coatings |
|
| Vol 60, No 3 (2019) |
Metallurgy of Nonferrous Metals |
Interaction of Salt Melts of Magnesium Production with Atmospheric Air |
|
| Vol 60, No 3 (2019) |
Foundry |
Numerical Investigation into the Influence of Overheating of Aluminum Melt on the Heat Exchange in the Continuous Combined Casting and Pressing |
|
| Vol 60, No 3 (2019) |
Pressure Treatment of Metals |
Methods of Compaction of the Al–B–W Powder Composition in a Metal Shell |
|
| Vol 60, No 3 (2019) |
Physical Metallurgy and Heat Treatment |
Effect of Bismuth and Lead on the Phase Composition and Structure of the Al–5% Si–4% Cu–4% Sn Alloy |
|
| Vol 60, No 3 (2019) |
Physical Metallurgy and Heat Treatment |
Influence of a Magnetic Field on Structure Formation during the Crystallization and Physicomechanical Properties of Aluminum Alloys |
|
| Vol 60, No 3 (2019) |
Physical Metallurgy and Heat Treatment |
Influence of Ultrafine-Grained Structure on the Kinetics and Fatigue Failure Mechanism of VT6 Titanium Alloy |
|
| Vol 60, No 3 (2019) |
Energy and Resource Saving |
Investigation into the Possibility of Reducing Carbon Dioxide Emissions during the Waelz Process of the Oxidized Zinc-Containing Material |
|
| Vol 60, No 3 (2019) |
Theory and Processes of Forming and Sintering of Powder Materials |
Mechanical Alloying with the Partial Amorphization of the Fe–Cr–Co–Ni–Mn Multicomponent Powder Mixture and Its Spark Plasma Sintering to Produce a Compact High-Entropy Material |
|
| Vol 60, No 3 (2019) |
Theory and Processes of Forming and Sintering of Powder Materials |
Mechanical and Tribological Behavior of Powder Metallurgy Processed Aluminum–Graphite Composite |
|
| Vol 60, No 3 (2019) |
Self-Propagating High-Temperature Synthesis |
Synthesis of TiC–NiCrBSi Binder Alloy Composite Powders for Cladding and Deposition of Wear-Resistant Coatings |
|
| Vol 60, No 3 (2019) |
Self-Propagating High-Temperature Synthesis |
Ignition of a Mixture of Tungsten with Teflon and Aluminum Additives |
|
| Vol 60, No 3 (2019) |
Refractory, Ceramic, and Composite Materials |
Macrostructure and Strength of the Al–Zn–Sn Composite Produced by Liquid-Phase Sintering of the Al–Zn Alloy and Pure Tin Powder Mixture |
|
| Vol 60, No 3 (2019) |
Refractory, Ceramic, and Composite Materials |
Synthesis of Ni(Cr)–hBN Nanocomposite by Mechanical Alloying and Its Thermodynamical Evaluation |
|
| Vol 60, No 3 (2019) |
Refractory, Ceramic, and Composite Materials |
Fabrication, Microstructure and Properties of the Mid-Fraction SiC Particles/6061Al Composites Using an Optimized Powder Metallurgy Technique |
|
| Vol 60, No 3 (2019) |
Refractory, Ceramic, and Composite Materials |
Research on the Properties of Boron Carbide Particle-Reinforced Copper-Matrix/Graphite Self-Lubricating Composite Materials |
|
| Vol 60, No 3 (2019) |
Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Fluxes |
Research into the Effect of Temperature Fields of Heating during Continuous Laser Treatment on the Performance of the T15K6 Carbide Insert Plates |
|
| Vol 60, No 4 (2019) |
Mineral Processing of Nonferrous Metals |
Studies on Beneficiation and Leaching Characteristics of Rare Earth Elements in Indian Red Mud |
|
| Vol 60, No 4 (2019) |
Mineral Processing of Nonferrous Metals |
Investigation into the Influence of Flocculants on Kinetic Parameters of Reducing Copper in an Aqueous Solution by Metallic Zinc |
|
| Vol 60, No 4 (2019) |
Metallurgy of Nonferrous Metals |
Development and Industrial Tests of the TiB2-Based Composite Material for Local Fractures Repairing of Electrolyzer Bottom Blocks |
|
| Vol 60, No 4 (2019) |
Metallurgy of Nonferrous Metals |
Production of the Al–B Master Alloy by Aluminothermal Reduction of KBF4 and B2O3 in a Medium of the Molten Salt Flux |
|
| Vol 60, No 4 (2019) |
Metallurgy of Nonferrous Metals |
Sulfidation Behaviour of Blast Furnace Dust at High Temperatures |
|
| Vol 60, No 4 (2019) |
Metallurgy of Nonferrous Metals |
Arsenic Removal from Cu–As-Containing Filter Cakes by Na2CO3 Leaching |
|
| Vol 60, No 4 (2019) |
Physical Metallurgy and Heat Treatment |
Heretophase Ceramics in the Hf–Si–Mo–B System Fabricated by the Combination of SHS and Hot Pressing Methods |
|
| Vol 60, No 4 (2019) |
Corrosion and Protection of Metals |
Peculiarities of Corrosion of a Zinc Coating in Neutral Media in the Presence of Inhibitors Based on Benzotriazole, Cyclohexylamine, and Morpholine |
|
| Vol 60, No 4 (2019) |
Corrosion and Protection of Metals |
Development of the Composition of a Magnesium Alloy for the Fabrication of Temporal Sealing Facilities Used in the Petroleum Industry |
|
| Vol 60, No 4 (2019) |
Production Processes and Properties of Powders |
Volumetric Reduction of the FeCl2–CaCl2 Melt by Calcium Dissolved in Calcium Chloride |
|
| Vol 60, No 4 (2019) |
Self-Propagating High-Temperature Synthesis |
Self-Propagating High-Temperature Synthesis of (Al–2% Mn)–10% TiC and (Al–5% Cu–2% Mn)–10% TiC Nanostructured Composite Alloys Doped with Manganese Powder |
|
| Vol 60, No 4 (2019) |
Self-Propagating High-Temperature Synthesis |
SHS-Aided Joining of Ceramic Materials with the Ta Substrate |
|
| Vol 60, No 4 (2019) |
Self-Propagating High-Temperature Synthesis |
Self-Propagating High-Temperature Synthesis of a Thin-Layer CuO–B–Glass System |
|
| Vol 60, No 4 (2019) |
Refractory, Ceramic, and Composite Materials |
Study into the Effect of the Amount of the Strengthening Phase in an Aluminum-Based Dispersion-Hardened Composite on Fracture Regularities |
|
| Vol 60, No 4 (2019) |
Refractory, Ceramic, and Composite Materials |
Structure of a Diamond–Matrix Interface and Durability of a Diamond Tool Fabricated by the Metallization of Diamond with Chromium during Sintering of the WC–Co Briquette with Copper Impregnation |
|
| Vol 60, No 4 (2019) |
Refractory, Ceramic, and Composite Materials |
Investigation of Heat Source Models and Process Factors on Temperature and Residual Stress in GTAW of Aluminum Plates |
|
| Vol 60, No 5 (2019) |
Mineral Processing of Nonferrous Metals |
Effect of Slime and Impurity Removal as a Pre-Treatment Stage Using a Low-Grade Zinc-Oxide Sample |
|
| Vol 60, No 5 (2019) |
Metallurgy of Nonferrous Metals |
Numerical Simulation Study on the Preparation of Micro-Nanometer MgO Magnesium Oxide by Direct Pyrolysis of Molten MgCl2 Magnesium Chloride |
|
| Vol 60, No 5 (2019) |
Metallurgy of Nonferrous Metals |
Fabrication of Silumins Using Silicon Production Waste |
|
| Vol 60, No 5 (2019) |
Metallurgy of Rare and Noble Metals |
La–Ni Based Alloy Modification by Ce and Fe for the Next Hydrogen Storage in Low-Temperature Metal Hydrides |
|
| Vol 60, No 5 (2019) |
Pressure Treatment of Metals |
Study of Compaction of the Titanium Powder by the Experimental-Analytical Method |
|
| Vol 60, No 5 (2019) |
Foundry |
Structure and Properties of the ML5 Alloy for Various Modification Methods |
|
| Vol 60, No 5 (2019) |
Physical Metallurgy and Heat Treatment |
High-Temperature Ion Nitriding Carbide Disposable Inserts of T15K6 Brand |
|
| Vol 60, No 5 (2019) |
Physical Metallurgy and Heat Treatment |
Investigation into the Microstructure and Mechanical Properties in Submicrovolumes of LS591-A Brass |
|
| Vol 60, No 5 (2019) |
Physical Metallurgy and Heat Treatment |
Thermal Stability of the Structure and Microhardness of the Al–0.05 vol % Al2O3 Nanocomposite Fabricated by Accumulative Roll Bonding |
|
| Vol 60, No 5 (2019) |
Physical Metallurgy and Heat Treatment |
Aluminum-Matrix Natural Composite Material Based on the Al–Ca–Ni–La–Fe System |
|
| Vol 60, No 5 (2019) |
Physical Metallurgy and Heat Treatment |
Structure and Properties of Coarse-Grained WC–Co Alloys with an Especially Homogeneous Microstructure |
|
| Vol 60, No 5 (2019) |
Theory and Processes of Forming and Sintering of Powder Materials |
Revisiting the Applicability Question of G.V. Samsonov’s Activated Sintering Concept in Studying Deformation Processes of Powder Materials |
|
| Vol 60, No 5 (2019) |
Self-Propagating High-Temperature Synthesis |
Applying SHS for the Fabrication of the Ti3SiC2–Ni Composite |
|
| Vol 60, No 5 (2019) |
Refractory, Ceramic, and Composite Materials |
Micromechanical Investigation of the Fatigue Crack Propagation and Damage Development in Al/Al2O3/SiC Hybrid Metal Matrix Composite |
|
| Vol 60, No 5 (2019) |
Refractory, Ceramic, and Composite Materials |
Studies on Copper-Coated Boron Carbide Particle-Reinforced Copper-Matrix/Graphite Self-Lubricating Composite Materials |
|
| Vol 60, No 5 (2019) |
Refractory, Ceramic, and Composite Materials |
Prospects of Nanotechnology and Design of Materials Based on Refractory Compounds |
|
| Vol 60, No 5 (2019) |
Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Fluxes |
Effect of High-Power Ion Beams on the Surface Topography and Structure of the Subsurface Layer of Submicrocrystalline Titanium Alloys |
|
| Vol 60, No 5 (2019) |
Nanostructured Materials and Functional Coatings |
Hybrid Technology Combining Vacuum Electrospark Alloying, Cathodic Arc Evaporation, and Magnetron Sputtering for the Deposition of Hard Wear-Resistant Coatings |
|
| Vol 60, No 6 (2019) |
Mineral Processing of Nonferrous Metals |
An Increase in Process Characteristics of Flotation of Low-Grade Fine-Disseminated Scheelite Ores |
|
| Vol 60, No 6 (2019) |
Metallurgy of Nonferrous Metals |
Kinetic Evaluation of the Possibility of Aluminum and Magnesium Recovery from Aqueous Solutions of Their Salts as an Alternative to the Electrolysis of Melts |
|
| Vol 60, No 6 (2019) |
Metallurgy of Nonferrous Metals |
Formation of Side Ledge and Bottom Ledge in an Aluminum Electrolyzer |
|
| Vol 60, No 6 (2019) |
Metallurgy of Nonferrous Metals |
Application of Polarization Measurements for the Calculation of the Current Efficiency |
|
| Vol 60, No 6 (2019) |
Metallurgy of Rare and Noble Metals |
Fabrication of Binary Niobium Alloys with Low-Melting Metals by the Deposition of Nanoparticles |
|
| Vol 60, No 6 (2019) |
Metallurgy of Rare and Noble Metals |
Sorption of Scandium from Sulfuric–Chloride Solutions by Activated Carbons |
|
| Vol 60, No 6 (2019) |
Foundry |
Investigation into the Surface Layer Composition Formed on the Ml19 (Mg–Nd–Y–Zn–Zr) Magnesium Alloy during Melting under Protective Gas Atmospheres |
|
| Vol 60, No 6 (2019) |
Physical Metallurgy and Heat Treatment |
Comparative Study of Coatings formed by Electrospark Alloying Using TiC–NiCr and TiC–NiCr– Eu2O3 Electrodes |
|
| Vol 60, No 6 (2019) |
Physical Metallurgy and Heat Treatment |
Phase Composition of D16 and V95 Deformable Aluminum Alloys with the Quantitative Assessment of Metal Burning at Various Stages of Development |
|
| Vol 60, No 6 (2019) |
On the 85th Anniversary of the Birthday of Academician V.n. Antsiferov |
Revisiting Some Prospects for the Further Development of Ideas by Academician V.N. Antsiferov in the Field of Structural Powder Materials |
|
| Vol 60, No 6 (2019) |
Production Processes and Properties of Powders |
Influence of Gas Atomization Parameters of the KhN60M Alloy on the Powder Characteristics for Laser Surfacing |
|
| Vol 60, No 6 (2019) |
Production Processes and Properties of Powders |
Fabrication of Metal Powders for Energy-Intensive Combustible Compositions Using Mechanochemical Treatment: 2. Structure and Reactivity of Mechanically Activated Al–Modifier–SiO2 Mixtures |
|
| Vol 60, No 6 (2019) |
Self-Propagating High-Temperature Synthesis |
Influence of Aluminum Additives on the Content and Parameters of the Fine Structure of Titanium Silicon Carbide in SHS Powders |
|
| Vol 60, No 6 (2019) |
Self-Propagating High-Temperature Synthesis |
Magnesiothermal Synthesis and Consolidation of the Multicomponent Powder Ceramics in the Zr–Si–Mo–B System |
|
| Vol 60, No 6 (2019) |
Refractory, Ceramic, and Composite Materials |
High-Strength Aluminum-Based Composite Materials Reinforced by Microstructures and Nanostructures (Mini Review) |
|
| Vol 60, No 6 (2019) |
Refractory, Ceramic, and Composite Materials |
Influence of the Concentrate of Rare-Earth Elements on the Stabilization of High-Temperature Phases and Properties of the ZrO2–7Y2O3-Based Ceramics |
|
| Vol 60, No 6 (2019) |
Refractory, Ceramic, and Composite Materials |
Investigation into the Influence of the Structure Dispersion and Homogeneity on the Properties of Powder Metastable Austenitic Carbide Steels and Diamond Tools |
|
| Vol 60, No 6 (2019) |
Refractory, Ceramic, and Composite Materials |
Physicochemical Processes of Fabricating Ceramic Materials Based on Nanopowders of Zirconium, Yttrium, Cerium, and Aluminum Oxides |
|
| Vol 60, No 6 (2019) |
Nanostructured Materials and Functional Coatings |
Growth Features of Diamond Films on the Tungsten Carbide Surface with a Copper Sublayer |
|
| Vol 60, No 6 (2019) |
Nanostructured Materials and Functional Coatings |
Phase Transformations and Properties of Concentration-Inhomogeneous Magnetic Materials Based on the Fe–30% Cr–27% Co System |
|
| Vol 60, No 6 (2019) |
Materials and Coatings Fabricated by Additive Technologies |
Structure and Properties of Corrosion-Resistant Steels Fabricated by Selective Laser Melting |
|
| Vol 60, No 6 (2019) |
Application of Powder Materials and Functional Coatings |
Powder Metallurgy in Belarus and Global Developmental Trends |
|
