Email this article Structure and phase composition of wear-resistant coatings of the TiB2–Al system prepared by electroexplosion sputtering
- Authors: Romanov D.A.1, Olesyuk O.V.1, Budovskikh E.A.1, Gromov V.E.1, Sameishcheva T.S.2, Yartsev P.S.2
-
Affiliations:
- Siberian State Industrial University
- Novosibirsk State Technical University
- Issue: Vol 57, No 1 (2016)
- Pages: 75-79
- Section: Porous Materials and Biomaterials
- URL: https://journals.rcsi.science/1067-8212/article/view/225836
- DOI: https://doi.org/10.3103/S1067821216010132
- ID: 225836
Cite item
Open Access
Access granted
Subscription Access
Abstract
The surface profile, structural features, and phase composition of coatings of the TiB2–Al system, which were fabricated by electroexplosion sputtering, are investigated by optical interferometry, scanning electron microscopy, and X-ray phase analysis. It is established that posttreatment surface roughness parameter Ra = 2.0 μm. The phase composition of formed layers includes Al, TiB2, and TiBC3. Coatings have a cohesion–adhesion bond with the surface-contact material.
About the authors
D. A. Romanov
Siberian State Industrial University
Author for correspondence.
Email: romanov_da@physics.sibsiu.ru
Russian Federation, ul. Kirova 42, Novokuznetsk, 654007
O. V. Olesyuk
Siberian State Industrial University
Email: romanov_da@physics.sibsiu.ru
Russian Federation, ul. Kirova 42, Novokuznetsk, 654007
E. A. Budovskikh
Siberian State Industrial University
Email: romanov_da@physics.sibsiu.ru
Russian Federation, ul. Kirova 42, Novokuznetsk, 654007
V. E. Gromov
Siberian State Industrial University
Email: romanov_da@physics.sibsiu.ru
Russian Federation, ul. Kirova 42, Novokuznetsk, 654007
T. S. Sameishcheva
Novosibirsk State Technical University
Email: romanov_da@physics.sibsiu.ru
Russian Federation, pr. K. Marksa, Novosibirsk, 630073
P. S. Yartsev
Novosibirsk State Technical University
Email: romanov_da@physics.sibsiu.ru
Russian Federation, pr. K. Marksa, Novosibirsk, 630073
Supplementary files
