Studying the Effect of Electrically Active Impurities Coming from Trimethylgallium Synthesized by Different Means on the Electrophysical Characteristics of Gallium Arsenide Epitaxial Layers


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

Chemical deposition from vapors of metalorganic compounds and volatile hydrides (metalorganic vapor phase epitaxy) is the main way of growing devices’ heteroepitaxial structures based on gallium arsenide (GaAs) and solid solutions of it (AlxGa1 – xAs and InyGa1 – yAs) on an industrial scale. Electrically active impurities deposited uncontrollably on epitaxial layers during growth worsen the electrophysical parameters of devices’ structures. Sources of deposited background impurities include the initial material. In this work, ways of synthesizing trimethylgallium (TMG) are compared from the viewpoint of impurities, especially electrically active GaAs, being incorporated into the final product. Ways of preparing TMG that include the exchange reaction between gallium trichloride and trimethylaluminum (TMA) and magnesium–organic syntheses in which metallic magnesium is used as the initial reagent are selected as the objects of study. The behavior of electrically active impurities during the purification of TMG via rectification is studied. The investigations are performed by means of spectral analysis and functional control over the growth of electrophysical parameters of GaAs epitaxial layers from TMG and arsine. It is established that the qualitative and quantitative composition of impurities in TMG depends on their content in the initial reagents. TMG prepared using the exchange reaction between gallium trichloride and TMA is the source of n-type impurities in GaAs. These are mainly Group IV elements (silicon, tin, and lead), with silicon impurities predominating. TMG fabricated using metallic magnesium is a source of both p- (preferentially zinc) and n-type (preferentially silicon) impurities. Irrespective of the quality of the initial raw TMG, the use of reduced-pressure rectification allows the fabrication of TMG with low impurity contents. Epitaxial GaAs layers grown using purified TMG (TMG rectificate) have n-type conduction with a low level of background doping (0.7–4) × 1014 cm–3 and high carrier mobilities of 7300–8500 cm2/(V s) at 300 K and 90 000–156 000 cm2/(V s) at 77 K. These values correspond to purest samples made with TMG and arsine using MOC-hydride epitaxy. Based on the data on functional control, the content of impurities that display electrical activity in GaAs is on the level of 10−7–10−6 at % in fabricated TMG-rectificate samples.

About the authors

M. V. Revin

AO Salut

Author for correspondence.
Email: saluthps@mail.ru
Russian Federation, Nizhny Novgorod, 603107

A. P. Kotkov

AO Salut

Email: saluthps@mail.ru
Russian Federation, Nizhny Novgorod, 603107

V. A. Ivanov

AO Salut

Email: saluthps@mail.ru
Russian Federation, Nizhny Novgorod, 603107

Yu. F. Rad’kov

AO Salut

Email: saluthps@mail.ru
Russian Federation, Nizhny Novgorod, 603107

N. V. Svinkov

AO Salut

Email: saluthps@mail.ru
Russian Federation, Nizhny Novgorod, 603107

A. N. Artemov

Faculty of Chemistry, Lobachevsky State University

Email: saluthps@mail.ru
Russian Federation, Nizhny Novgorod, 603950

B. G. Gribov

AO Molecular Electronics Research Institute (NIIME)

Email: saluthps@mail.ru
Russian Federation, Moscow, 124460


Copyright (c) 2018 Pleiades Publishing, Ltd.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies