| Шығарылым |
Атауы |
Файл |
| Том 41, № 6 (2019) |
The Influence of Debris Solids on the Ground Surface Roughness and the Assessment of the Surface Scratching Probability |
(Eng)
|
|
Lavrinenko V., Molchanov V., Solod V., Prots L.
|
| Том 41, № 5 (2019) |
Porosity and Water Absorbability of Tool Composite Materials as Factors of Improving Wear Resistance of Superabrasive Grinding Wheels. Part 3. Cutting-Tool Ceramic Composites |
(Eng)
|
|
Lavrinenko V.
|
| Том 41, № 4 (2019) |
Machinability Investigation and Cost Estimation During Finish Dry Hard Turning of AISI 4340 Steel with Untreated and Cryo Treated Cermet Inserts |
(Eng)
|
|
Das A., Patel S., Biswal B., Das S.
|
| Том 41, № 4 (2019) |
The Phonomenon of Material Side Flow During Finish Turning of EN X153CrMoV12 Hardened Steel with Tools Based on Polycrystalline Cubic Boron Nitride |
(Eng)
|
|
Ociepa M., Jenek M., Feldshtein E., Leksycki K.
|
| Том 41, № 4 (2019) |
Specifying the Process Parameters for Diamond Dressing of Grinding Wheels |
(Eng)
|
|
Shakhbazov Y., Shyrokov V., Fedorovych V.
|
| Том 41, № 3 (2019) |
The Influence of the Cutting Speed on the Temperature and Forces at the Precision Turning of Nonferrous Metals Using Cutters with Round Diamond-Hard-Alloyed Plates |
(Eng)
|
|
Stakhniv N., Devin L.
|
| Том 41, № 3 (2019) |
Porosity and Water Absorbability of Tool Composite Materials as Factors of Improving Wear Resistance of Superabrasive Grinding Wheels. Part 2. Water Freezing in Porous Space of Superabrasive Composites |
(Eng)
|
|
Lavrinenko V., Kravchenko Y.
|
| Том 41, № 2 (2019) |
The Influence of Cutting Speed on Cutting Temperatures and Forces in Fine Turning of VT1-0 Titanium Alloy by a PCD Tool |
(Eng)
|
|
Devin L., Stakhniv N., Antoniuk A., Rychev S., Nechiporenko V.
|
| Том 40, № 6 (2018) |
On the Wear Comparative Analysis of Cutting Tools Made of Composite Materials Based on Polycrystalline Cubic Boron Nitride when Finish Turning of AISI D2 (EN X153CrMoV12) Steel |
(Eng)
|
|
Ociepa M., Jenek M., Feldshtein E.
|
| Том 40, № 6 (2018) |
The Influence of Machining Conditions on Performance of Diamond Grinding of Silicon Carbide Ceramic Balls |
(Eng)
|
|
Sokhan’ S., Maistrenko A., Sorochenko V., Voznyi V., Kulych V., Gamanyuk M., Zubanev E.
|
| Том 40, № 5 (2018) |
Current Advances in the Development of Abrasive Tools and Investigation of Diamond Abrasive Machining Processes (Materials Science Approach). Review |
(Eng)
|
|
Lavrinenko V.
|
| Том 40, № 4 (2018) |
A Study of the Potential of Improving Performance of AS20 Diamond Powders Through Altering Their Dimensional and Physico-Chemical Characteristics |
(Eng)
|
|
Lavrinenko V., Ilnitskaya G., Petasyuk G., Ishchenko E., Gaidai S., Pasichnyi O., Skryabin V., Shatokhin V., Zaitseva I., Kuz’menko E., Timoshenko V.
|
| Том 40, № 4 (2018) |
Interaction between Debris Particles and Polishing Powder Wear Particles in Polishing Optoelectronic Components |
(Eng)
|
|
Filatov Y.
|
| Том 40, № 3 (2018) |
A Study of the Influence of Phase Composition of Cutting Inserts Made of Diamond–Tungsten Carbide Nanocomposite on the Process of Finish Turning of Aluminum Alloys and Brass |
(Eng)
|
|
Stakhniv N., Devin L., Bochechka A., Osadchii A., Nazarchuk S., Rychev S.
|
| Том 40, № 3 (2018) |
Ensuring Fatigue Life of Parts During Finish Turning with Cubic Boron Nitride Tools |
(Eng)
|
|
Barandych K., Vysloukh S., Antonyuk V.
|
| Том 40, № 2 (2018) |
The Influence of Surface Roughness of Cutting Inserts Made of Diamond–Tungsten Carbide Composite on Cutting Forces and Machining Quality in Turning Aluminum Alloys and Brass |
(Eng)
|
|
Devin L., Stakhniv N., Mel’niichuk Y.
|
| Том 40, № 2 (2018) |
The Process of Abrasive Machining as a Friction Interaction Between Dissimilar Materials |
(Eng)
|
|
Lavrinenko V., Solod V.
|
| Том 40, № 1 (2018) |
Surface Roughness of Optoelectronic Components in Mechanical Polishing |
(Eng)
|
|
Filatov Y.
|
| Том 40, № 1 (2018) |
Drilling of Composites Using Tools of Polycrystalline Superhard Materials |
(Eng)
|
|
Devin L., Grechuk A., Lupkin B.
|
| Том 39, № 6 (2017) |
Diamond polishing of crystalline materials for optoelectronics |
(Eng)
|
|
Filatov Y.
|
| Том 39, № 5 (2017) |
Nano-Scratching resistance of high-chromium white cast iron and its correlation with wear of cBN tool in machining |
(Eng)
|
|
Chen L., Persson J., Ståhl J., Zhou J.
|
| Том 39, № 4 (2017) |
Correlation between edge radius of the cBN cutting tool and surface quality in hard turning |
(Eng)
|
|
Zhao T., Agmell M., Persson J., Bushlya V., Ståhl J., Zhou J.
|
| Том 39, № 4 (2017) |
Influence of radial depth of cut on entry conditions and dynamics in face milling application |
(Eng)
|
|
Agic A., Eynian M., Hägglund S., Ståhl J., Beno T.
|
| Том 39, № 4 (2017) |
Sensitivity of Colding tool life equation on the dimensions of experimental dataset |
(Eng)
|
|
Johansson D., Hägglund S., Bushlya V., Ståhl J.
|
| Том 39, № 4 (2017) |
In-process monitoring of shape accuracy of flat surfaces of optical and microelectronic components in polishing |
(Eng)
|
|
Filatov Y., Sidorko V., Kovalev S., Filativ O., Monteil G.
|
| Нәтижелер 39 - 1/25 |
1 2 > >>
|
