On the Wear Comparative Analysis of Cutting Tools Made of Composite Materials Based on Polycrystalline Cubic Boron Nitride when Finish Turning of AISI D2 (EN X153CrMoV12) Steel

Michal Ociepa; Mariusz Jenek; Eugene Feldshtein

doi:10.3103/S1063457618060059

On the Wear Comparative Analysis of Cutting Tools Made of Composite Materials Based on Polycrystalline Cubic Boron Nitride when Finish Turning of AISI D2 (EN X153CrMoV12) Steel

Авторы: Ociepa M.¹, Jenek M.¹, Feldshtein E.¹
Учреждения:
1. Institute of Machine Building and Operation
Выпуск: Том 40, № 6 (2018)
Страницы: 396-401
Раздел: Investigation of Machining Processes
URL: https://journals.rcsi.science/1063-4576/article/view/186359
DOI: https://doi.org/10.3103/S1063457618060059
ID: 186359

Цитировать

Полный текст

Открытый доступ
Доступ закрыт

Доступ предоставлен
Доступ закрыт

Только для подписчиков

Аннотация
Об авторах
Список литературы
Дополнительные файлы
Статистика

Аннотация

This study presents the results of research on the condition of low content polycrystalline cubic boron nitride cutting tools (cBN-L) when finish turning of hardened AISI D2 tool steel. The least changes in the condition of wedges throughout the investigated turning feeds were observed for the composite cBN020 whereas the highest wear intensity was found for the composite cBN200. For all researched cutting materials, abrasive wear, as well intense adhesion were observed.