Поиск

Выпуск
Название
Авторы
Том 2017, № 11 (2017)
Effect of Barothermal Treatment on the Structure and the Mechanical Properties of a High-Strength Eutectic Al–Zn–Mg–Cu–Ni Aluminum Alloy
Akopyan T., Padalko A., Belov N., Karpova Z.
PDF
(Eng)
Том 2017, № 6 (2017)
Mechanical properties of the welded joints of 1565ch alloy sheets at low temperatures
Ovchinnikov V., Drits A., Gureeva M., Malov D., Rastopchin R.
PDF
(Eng)
Том 2017, № 1 (2017)
Increasing the reliability and quality of important cast products made of chemically active metals and alloys
Varfolomeev M., Moiseev V., Shcherbakova G.
PDF
(Eng)
Том 2018, № 13 (2018)
Technological Possibilities of Increasing the Quality and Decreasing the Cost of the Products Operating under High Loads at the Stage of Metallurgical Treatment
Sudnik L., Rudnitskii F., Rudnitskii K., Nikolaichik Y., Galinovskii A., Moiseev V.
PDF
(Eng)
Том 2017, № 9 (2017)
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: I. Solidification and structure
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Bondarenko Y., Bulakhtina M., Ashmarin A., Arginbaeva E., Alad’ev N.
PDF
(Eng)
Том 2019, № 5 (2019)
Electrochemical Oxidation of a Heavy Tungsten-Containing VNZh-Type Alloy and Its Components in Ammonia–Alkali Electrolytes
Kuznetsova O., Levin A., Sevast’yanov M., Tsybin O., Bol’shikh A.
PDF
(Eng)
Том 2017, № 12 (2017)
Effect of the Grain Size of the Initial Structure of 1565chM Alloy on the Structure and Properties of the Joints Fabricated by Friction Stir Welding
Ovchinnikov V., Drits A., Gureeva M., Malov D.
PDF
(Eng)
Том 2017, № 10 (2017)
Methodological aspects of the quantitative texture analysis of HCP Alloy (Ti, Zr) sheet semiproducts
Dzunovich D., Betsofen S., Panin P.
PDF
(Eng)
Том 2019, № 11 (2019)
Effect of the Charge Mixing Time on the Magnetic Hysteretic Properties of a Hard Magnetic Powder Fe–30% Cr–8% Co Alloy
Alymov M., Zelenskii V., Milyaev I., Ustyukhin A., Ankudinov A., Abashev D., Petrakova N.
PDF
(Eng)
Том 2019, № 6 (2019)
Thermal-Barrier Coatings with an External Magnetron-Sputtered Ceramic Layer for High-Temperature Nickel Alloy Turbine Blades
Budinovskii S., Matveev P., Smirnov A., Chubarov D.
PDF
(Eng)
Том 2019, № 4 (2019)
Experimental Identification of a Nonlinear Deformation Model for a Shape Memory Alloy during Phase and Structural Transformations
Movchan A., Kazarina S., Sil’chenko A.
PDF
(Eng)
Том 2019, № 1 (2019)
Interaction of Exogenous Zirconia Nanoparticles with Tin in Model Complex Nickel Alloys
Anuchkin S., Samokhin A.
PDF
(Eng)
Том 2018, № 12 (2018)
Structural and Phase Characteristics of the Ni3Al-Based Intermetallic Alloy Fabricated by High-Gradient Directional Solidification and Selective Laser Melting
Petrushin N., Arginbaeva E., Elyutin E., Treninkov I.
PDF
(Eng)
Том 2018, № 4 (2018)
Connected and Doubly Connected Buckling Problems for Shape Memory Alloys
Movchan A., Dumanskii S., Kazarina S.
PDF
(Eng)
Том 2018, № 7 (2018)
Calculated Location of Carbon and Boron Atoms in the Crystal Structures of α- and γ-Nb5Si3
Kuz’mina N., Svetlov I., Marchenko E.
PDF
(Eng)
Том 2017, № 9 (2017)
Distribution of the mechanical properties of semiproducts over their volume predicted as function of the technological parameters of hot metal forming
Galkin V., Golovkina M., Paltievich A.
PDF
(Eng)
Том 2016, № 11 (2016)
Effect of the liquid phase on the formation of orthorhombic boride during the crystallization of Fe82B18 amorphous ribbons
Suslov A., Lad’yanov V.
PDF
(Eng)
Том 2019, № 11 (2019)
Development of Gas Porosity along the Ion Range in Vanadium Alloys during Sequential Helium and Hydrogen Ion Irradiation
Stal’tsov M., Chernov I., Kalin B., Korshunov S., Lagov P.
PDF
(Eng)
Том 2019, № 6 (2019)
Technology for the Deposition of Wear-Resistant Coatings on the Airfoil Shroud Platforms of GTE Turbine Blades
Abraimov N., Lukina V., Ivanova A.
PDF
(Eng)
Том 2019, № 3 (2019)
New Universal Flaky Flux for Cast Magnesium Alloys
Leonov A., Duyunova V., Uridiya Z., Trofimov N.
PDF
(Eng)
Том 2019, № 1 (2019)
Comparative Analysis of the Ternary Al–Si–X and Al–Cu–X (X = Sn, Pb, Bi, Cd, In) Systems in the Aluminum Alloy Range
Yakovleva O., Belov N.
PDF
(Eng)
Том 2018, № 10 (2018)
Effect of High-Pressure Torsion on the Lattice Parameters of α-Fe and α-Fe-Based Solid Solutions
Zhukov O., Filippova V., Tomchuk A., Neumoin K., Basov S., Glezer A., Perlovich Y., Krymskaya O., Muradimova L.
PDF
(Eng)
Том 2018, № 4 (2018)
Microstructural Model for the Deformation of Shape Memory Alloys
Movchan A., Mishustin I., Kazarina S.
PDF
(Eng)
Том 2018, № 7 (2018)
Mechanical Properties of Mg–Dy–Sm–Zr Magnesium Alloys
Rokhlin L., Lukyanova E., Dobatkina T., Tarytina I., Korol’kova I.
PDF
(Eng)
Том 2017, № 10 (2017)
Mechanical and functional properties of commercial alloy TN-1 semiproducts fabricated by warm rotary forging and ECAP
Andreev V., Yusupov V., Perkas M., Prosvirnin V., Shelest A., Prokoshkin S., Khmelevskaya I., Korotitskii A., Bondareva S., Karelin R.
PDF
(Eng)
1 - 25 из 95 результатов 1 2 3 4 > >> 
Подсказки:
  • Ключевые слова чувствительны к регистру
  • Английские предлоги и союзы игнорируются
  • По умолчанию поиск проводится по всем ключевым словам (агенс AND экспериенцер)
  • Используйте OR для поиска того или иного термина, напр. образование OR обучение
  • Используйте скобки для создания сложных фраз, напр. архив ((журналов OR конференций) NOT диссертаций)
  • Для поиска точной фразы используйте кавычки, напр. "научные исследования"
  • Исключайте слово при помощи знака - (дефис) или оператора NOT; напр. конкурс -красоты или же конкурс NOT красоты
  • Используйте * в качестве версификатора, напр. научн* охватит слова "научный", "научные" и т.д.

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах