Email this article Distribution of the mechanical properties of semiproducts over their volume predicted as function of the technological parameters of hot metal forming
- Authors: Galkin V.I.1, Golovkina M.G.1, Paltievich A.R.1
-
Affiliations:
- National Research University Moscow Aviation Institute
- Issue: Vol 2017, No 9 (2017)
- Pages: 764-770
- Section: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/171717
- DOI: https://doi.org/10.1134/S0036029517090051
- ID: 171717
Cite item
Open Access
Access granted
Subscription Access
Abstract
A technique is developed to estimate the effect of the deformation parameters on the distribution of the mechanical properties of the products made of aluminum alloys. Regression dependences of the mechanical properties on the deformation intensity, the temperature, and the cooling rate are obtained. A software application to CAE systems is developed to predict the distribution of the mechanical properties of the products made of aluminum alloys over their volume.
Keywords
About the authors
V. I. Galkin
National Research University Moscow Aviation Institute
Author for correspondence.
Email: galkin@mati.ru
Russian Federation, Moscow
M. G. Golovkina
National Research University Moscow Aviation Institute
Email: galkin@mati.ru
Russian Federation, Moscow
A. R. Paltievich
National Research University Moscow Aviation Institute
Email: galkin@mati.ru
Russian Federation, Moscow
