检索

期
标题
作者
卷 9, 编号 1-5 (2015)
Formation of the product portfolio on the example of the trademark "Kores"
Doroshkevich Y., Vinogradova I.
PDF
(Rus)
卷 11, 编号 3 (2017)
Technique for evaluating the efficiency of a V-belt variator in a light vehicle
Luk'yanov A., Starikov A.
PDF
(Rus)
卷 6, 编号 1 (2012)
Quality and reliability of systems of an electrical supply of independent objects
Chernov A., Akimov A.
PDF
(Rus)
卷 5, 编号 1 (2011)
Gain factor of vacuum brake booster
Shuklinov S.
PDF
(Rus)
卷 6, 编号 2-4 (2012)
Estimate of the factor of safety of convex bottoms under uniform internal pressure
Lyang V.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Development of technological schemes of slip-rings made ​​of beryllium bronze with methods of sheet stamping
Sidel'nikov S., Ber V., Orelkina T., Vagner A., Korobkin A.
PDF
(Rus)
卷 8, 编号 1-2 (2014)
Increase of metal utilization factor through the use of combined operations of drawing-flanging in manufacture of box-shaped parts with a hole in a bottom part
Nikitenko V.
PDF
(Rus)
卷 9, 编号 2-4 (2015)
Method and some results of application of the gas-dynamic surface modification technology for machine parts to increase their lifetime
Moskvitin G., Arkhipov V., Londarskiy A., Polyakov A., Pugachev M., Shirokova N., Falaleev N.
PDF
(Rus)
卷 14, 编号 2 (2020)
Method for assessing the effectiveness of the use of electromechanical transmissions of vehicles at the design stage
Padalkin B., Ivanenkov V., Kositsyn B., Stadukhin A., Balkovskiy K.
PDF
(Rus)
卷 3, 编号 1 (2009)
Mathematical Model of the Tire Cornering Coefficient for Wheeled Vehicles
Mikhailin I.
卷 7, 编号 2-2 (2013)
Designing compensators of thermal stress for modern aviation turboshaft engine by powder metallurgy methods
Isaeva E., Perevoin S., Isaev D.
PDF
(Rus)
卷 7, 编号 4-1 (2013)
Study of correlation relation between volume production of vehicles and equipment and the factors of production used in mechanical engineering
Dvortsova O., Nayanov E.
PDF
(Rus)
卷 8, 编号 1-2 (2014)
Development of technological processes of cold forging metal-roll cutting with use of progressive methods of mathematical modeling
Mishenko O., Fedorina E.
PDF
(Rus)
卷 9, 编号 3-4 (2015)
Gas-turbine engine secondary air system analysis
Yurchenko G.
PDF
(Rus)
卷 4, 编号 2 (2010)
Diagnostics of sustainability and risk economic facilities led by
Katanaev N., Larina E.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Cutting coefficient in turning
Volkov A., Matveev S.
PDF
(Rus)
卷 7, 编号 1-4 (2013)
Nonlocal approach to thermodynamics of mixtures
Maikov V., Balunov A.
PDF
(Rus)
卷 8, 编号 2-2 (2014)
Improvement of cylindrical spur gears wear resistance
Gorlenko O., Makarov G.
PDF
(Rus)
卷 15, 编号 1 (2021)
Calculation of the coefficient of local hydraulic diaphragm resistance in transitional and laminar areas of flow
Kondratyev A., Ogorodnik K., Frikha M.
PDF
(Rus)
卷 2, 编号 1 (2008)
Valve Traction Motors in Vehicle Electric Drive
Lokhnin V., Berbirenkov I.
PDF
(Rus)
卷 7, 编号 4-1 (2013)
Analysis of factorial models ratings bankruptcy machinery enterprises
Katanaev N., Arkatova N., Nazarkova E.
PDF
(Rus)
卷 7, 编号 1-4 (2013)
Development of rapid diagnostics and prediction of residual life based on detection of accumulated damage of metal structure during sustained loading
Zorin E.
PDF
(Rus)
卷 8, 编号 2-3 (2014)
Influence of traffic emission on distribution of heavy metals and benzo(α)pyrene in water of recreational areas
Sorokin A., Sotnikova E.
PDF
(Rus)
卷 12, 编号 1 (2018)
Modeling of the mechanism of appearance of external infrasound of land vehicles
Nyunin B., Grafkina M., Sviridova E.
PDF
(Rus)
卷 6, 编号 1 (2012)
DETERMINATION OF FRICTION COEFFICIENT BY COMPRESSION OF RING SAMPLE DURING HOT DEFORMATION
Petrov A.
PDF
(Rus)
卷 6, 编号 2-1 (2012)
Moment theory of wedge
Martinov V., Zverev A.
PDF
(Rus)
卷 7, 编号 1-1 (2013)
Estimation of efficiency of internal combustion engine in terms of quality index of system operation
Grabovskiy A.
PDF
(Rus)
卷 7, 编号 1-4 (2013)
Study of fuel composition influence on the radiative heat transfer in radiant tube furnace chamber
Vetkin A., Suris A.
PDF
(Rus)
卷 8, 编号 2-3 (2014)
Study of pump separator for gas-liquid mixture for sanitary compartment of space station
Salnikov N., Bobe L., Nikolaykina N., Rykhlov N.
PDF
(Rus)
卷 6, 编号 1 (2012)
ENVIRONMENTAL DESIGN OF CAST AUTOMOTIVE STRUCTURES BASED ON THE INNOVATIVE METHOD OF DETERMINATION OF DYNAMIC YOUNG'S MODULUS AND POISSON'S RATIO
Nyunin B., Grafkina M.
PDF
(Rus)
卷 6, 编号 2-1 (2012)
The comparative evalution of the vibration damping characteristics of materials for modification of an oil pan and valve covers of an engine
Kruglov K., Sherbakov V.
PDF
(Rus)
卷 7, 编号 2-1 (2013)
Influence of friction in joints on the performance of tensioning device of continuous track
Bulbutenko S., Fedotkin R., Ovcharenko A., Beynenson V.
PDF
(Rus)
卷 8, 编号 2-2 (2014)
Physico-chemical method for hardening of parts of titanium alloys
Shandrov B., Philippov V., Khomyakova N.
PDF
(Rus)
卷 9, 编号 4-5 (2015)
The development of innovative products and an assessment of its economic efficiency in design activity of students
Shkatov N., Shevchenko A., Shlepkin V., Kozhuhar D., Agletdinova G., Shiriaev D.
PDF
(Rus)
卷 12, 编号 1 (2018)
Investigation of the driven disks of hydromechanical transmission BELAZ with the new LZ_G-Base oil and the friction materials FM-15 and MK-5
Reginya V., Il'yushchenko A., Leshok A., Rogovoy A., Gryazev D., Petrov V.
PDF
(Rus)
卷 3, 编号 1 (2009)
Principles of Extruding Forging Die Design
Ragulin A., Anukhin A., Filippov Y., Kononov A.
卷 6, 编号 2-1 (2012)
Investigation of the heat transfer process in a mesh matrix of a rotary heat exchanger
Alexeev R., Kostyukov A.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Low - and non-waste technology of stamping ring forgings
Shibakov R.
PDF
(Rus)
卷 8, 编号 1-1 (2014)
Study of mechanism of influence of internal air flows on overall vehicle aerodynamics
Petrov A.
PDF
(Rus)
卷 9, 编号 1-1 (2015)
Research of supporting off-road ability with front and rear wheels track mismatch
Ostretsov A., Sharipov V., Bernatsky V., Esakov A., Mordasov A.
PDF
(Rus)
卷 12, 编号 3 (2018)
Age of aerodynamics of automobiles
Korolev E., ZHamalov R., Bernackij V.
PDF
(Rus)
卷 6, 编号 2-1 (2012)
Test-bench for tractive ability and efficiency tests of belt drives
Balovnev N., Dmitrieva L., Semin I.
PDF
(Rus)
卷 7, 编号 3-1 (2013)
Exact solution of Cauchy problem for Harrod Domar differential equation model with variable coefficient of incremental capital-output ratio
Meyerson A., Chernyaev A.
PDF
(Rus)
卷 8, 编号 3-1 (2014)
Experimental and calculation method for determining traction properties of automobile tires in operation
Shadrin S., Ivanov A.
PDF
(Rus)
卷 9, 编号 1-2 (2015)
Modeling of uneven flanging process
Tipalina A., Filippov Y., Panfyorov V., Kuchkovsky Y., Boronnikov D.
PDF
(Rus)
卷 12, 编号 3 (2018)
The method of determining the efforts of the pre-tightening of bolts to a bearing of the crankshaft, automobile and tractor engines
Gots A.
PDF
(Rus)
1 - 46 的 46 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##