Principles of Extruding Forging Die Design
- Authors: Ragulin AV1, Anukhin AS1, Filippov Y.K1, Kononov AV2
-
Affiliations:
- MSTU MAMI
- Insayur-Avtotrade TL Co Ltd
- Issue: Vol 3, No 1 (2009)
- Pages: 151-156
- Section: Articles
- URL: https://journals.rcsi.science/2074-0530/article/view/69983
- DOI: https://doi.org/10.17816/2074-0530-69983
- ID: 69983
Cite item
Full Text
Abstract
This paper is about die design principles according to technical, social and economic demands by example of development of cold forging procedure ball pin body. Authors analyzed metal flow kinematics under product shaping on forging transitions with computer modeling. There are local effects going with forming process, including distribution and changing of specific forces on die walls and punch and pusher faces.
Keywords
About the authors
A V Ragulin
MSTU MAMIMSTU MAMI
A S Anukhin
MSTU MAMI
Email: anukhin@mami.ru <mailto:anukhin@mami.ru>
MSTU MAMI
Yu K Filippov
MSTU MAMIMSTU MAMI
A V Kononov
Insayur-Avtotrade TL Co LtdInsayur-Avtotrade TL Co Ltd
References
- Евстратов В.А., Еремин В.И. Исследование стойкости пуансонов для холодного выдавливания.- Вестн. Харьк. политехн. ин-та, 1983, № 198. Прогрессивная технология обработки металлов, вып. 5, с. 20-23.
- Евстратов В.А., Еремин В.И. Пути повышения стойкости пуансонов для холодного выдавливания.- Автомобильная промышленность, 1981, № 11, с. 30-31.
- Холодная и полугорячая объемная штамповка на прессах: Методические рекомендации. М.: НИИмаш, 1981. 73 с.
- Евстифеев В.В., Кокоулин В.П. - Конструкция штампов для холодной объемной штамповки на универсальных прессах.- Кузнечно-штамповочное производство, 1978, № 4, с. 17-21.
- Филиппов Ю.К., Павлов Н.Д. и др. "Штамп для холодной штамповки". А.С. № 1323165, от 15.03.87.