| Issue |
Section |
Title |
File |
| Vol 37, No 1 (2016) |
Article |
Surface modification of diamond-like carbon coatings to control over run-in processes in friction pair |
|
| Vol 37, No 1 (2016) |
Article |
Tribochemical processes in epoxyorganic textolite–steel friction pair |
|
| Vol 37, No 1 (2016) |
Article |
Formation of wear-resistant nanostructured TiN/Cu coatings |
|
| Vol 37, No 1 (2016) |
Article |
Determination of the efficiency of high-entropy cutting tool materials |
|
| Vol 37, No 1 (2016) |
Article |
Mechanisms of wear of elastomers under direct impact of abrasive particles |
|
| Vol 37, No 1 (2016) |
Article |
Modeling of abrasive wear by the meshless smoothed particle hydrodynamics method |
|
| Vol 37, No 2 (2016) |
Article |
Evaluation of the parameters of wear law for heat-exchange tube–spacer grid pair of steam generator of REST-OD-300 nuclear reactor plant operating in argon atmosphere |
|
| Vol 37, No 2 (2016) |
Article |
Lubricity of cholesteric liquid-crystal nanomaterials in friction of solids |
|
| Vol 37, No 2 (2016) |
Article |
Composition consisting of lubricating oil, alumina nanopowder, and surfactant for reducing friction in rolling bearings |
|
| Vol 37, No 2 (2016) |
Article |
Effect of alloying additives on impact-abrasive wear of manual arc welded hadfield steel hardfacings |
|
| Vol 37, No 2 (2016) |
Article |
Influence of the surface layer structure on the interaction character of friction pairs formed by X155CrMo12-1, 41Gr4, and 35GrMnSi4 steels with CuAl9Fe4 bronze |
|
| Vol 37, No 2 (2016) |
Article |
Friction machine for testing materials under boundary lubrication |
|
| Vol 37, No 3 (2016) |
Article |
Dynamic and quasi-static instability of sliding thermoelastic frictional contact |
|
| Vol 37, No 3 (2016) |
Article |
Electroelastic model of dry friction: Macroscopic approach |
|
| Vol 37, No 3 (2016) |
Article |
Kinetics of damage accumulation in pearlitic rail steels under contact fatigue |
|
| Vol 37, No 3 (2016) |
Article |
Kinetics of formation of boundary lubricating film in zone of facing–tool contact under metal cutting |
|
| Vol 37, No 3 (2016) |
Article |
Electrical and tribological properties of composite material with copper matrix reinforced by superelastic hard carbon |
|
| Vol 37, No 3 (2016) |
Article |
Comparative friction characteristics of high-entropy mononitride coatings |
|
| Vol 37, No 3 (2016) |
Article |
Effect of hydrogen heat treatment on antifriction properties of nitrided VT6 titanium-based alloy |
|
| Vol 37, No 3 (2016) |
Article |
Tribological studies of thin diamond-like films synthesized using high-speed plasma jet |
|
| Vol 37, No 4 (2016) |
Article |
Effect of ratio of hardnesses, load, and roughness parameters on approach in elastoplastic contact of rough surfaces of flat parts |
|
| Vol 37, No 4 (2016) |
Article |
Wear resistance of cast Fe–Cr–C steels with various combinations of structural constituents at high velocities of sliding |
|
| Vol 37, No 4 (2016) |
Article |
Effect of conditions of diamond grinding on tribological behavior of alumina-based ceramics |
|
| Vol 37, No 4 (2016) |
Article |
The role of structure formation in forming the physicomechanical properties of composites of the diamond–(Fe–Cu–Ni–Sn) system |
|
| Vol 37, No 4 (2016) |
Article |
Simulations of the working contact loads of a tillage element |
|
| Vol 37, No 5 (2016) |
Article |
Minimization of abrasive wear for the internal surface of the hub of a friction pair |
|
| Vol 37, No 5 (2016) |
Article |
Tribological properties of combined molybdenum coatings formed by electric-spark alloying on stainless steel |
|
| Vol 37, No 5 (2016) |
Article |
Provision of the required wear resistance criteria of heavy-duty gas turbine engine parts based on the control of the cutting conditions |
|
| Vol 37, No 5 (2016) |
Article |
The effect of the coefficient of journal friction in ball-and-socket bogie body pivots on the work done by friction forces in curvilinear motion |
|
| Vol 37, No 5 (2016) |
Article |
Estimating stresses and movement work of a soil-cultivator tip using the finite-element method |
|
| Vol 37, No 5 (2016) |
Article |
Energy-mechanical concept of the durability prediction of friction units on the wear resistance criterion of elements |
|
| Vol 37, No 6 (2016) |
Article |
Ion beam processing of austenite steels: Tribotechnical and corrosion properties |
|
| Vol 38, No 1 (2017) |
Article |
Tribotechnical properties of thin-film coatings obtained by the tribomodifcation of crankshaft pins for ship diesel engines |
|
| Vol 38, No 1 (2017) |
Article |
Study of the influence of ring misalignment in rolling bearings on frictional torque and the fatigue life of supports |
|
| Vol 38, No 1 (2017) |
Article |
Study of the geometric characteristics of friction surfaces of diamonds during polishing |
|
| Vol 38, No 1 (2017) |
Article |
Transformation of 20Х13 steel structure during intensive friction interactions |
|
| Vol 38, No 1 (2017) |
Article |
Effect of bulk heat treatment and plasma surface hardening on the microstructure and erosion wear resistance of complex-alloyed cast irons with spheroidal vanadium carbides |
|
| Vol 38, No 1 (2017) |
Article |
Wear resistance of amorphous-crystalline detonation coatings with solid lubricant additive in vacuum |
|
| Vol 38, No 1 (2017) |
Article |
Express evaluation method of internal friction parameters in molding material briquettes |
|
| Vol 38, No 2 (2017) |
Article |
Wear mechanism and chemical composition optimization of complex-alloyed cast iron with spheroidal vanadium carbide under conditions of abrasive erosion |
|
| Vol 38, No 2 (2017) |
Article |
Peculiar properties of BK-8 hard alloy wear after volumetric laser pulsed hardening under production conditions |
|
| Vol 38, No 2 (2017) |
Article |
Tribological characteristics of calcium sulfonates as detergents for engine oils |
|
| Vol 38, No 2 (2017) |
Article |
Studying tribotechnical properties of nanostructured lubricating oils with various dispersive media |
|
| Vol 38, No 2 (2017) |
Article |
Modeling elastomer wear under the effects of solid particles at an angle to the surface |
|
| Vol 38, No 3 (2017) |
Article |
Minimizing the number of experimental tribological tests on the friction machine of reciprocating motion |
|
| Vol 38, No 3 (2017) |
Article |
Structural and frictional peculiarities of nanocrystalline thermally expanded graphite particles sonicated in water and glycerol |
|
| Vol 38, No 3 (2017) |
Article |
Quantification of wt % F stabilizing water in soap-thickened plastic lubricants by the method of IR Fourier transform spectroscopy |
|
| Vol 38, No 3 (2017) |
Article |
Effect of preliminary ball burnishing on wear resistance of the nitrided VT22 alloy |
|
| Vol 38, No 3 (2017) |
Article |
Test procedure of cladded alloys for resistance against high temperature abrasive wear |
|
| Vol 38, No 3 (2017) |
Article |
Effect of axial play on the sealing ability of the radial single-lip seal in an abrasive environment |
|
| Vol 38, No 3 (2017) |
Article |
Effect of crystal structure on the tribological properties of diamond coatings on hard-alloy cutting tools |
|
| Vol 38, No 4 (2017) |
Article |
Friction of ultrathin Si, F-containing coatings |
|
| Vol 38, No 4 (2017) |
Article |
Wear resistance of coating materials under the frictional heating conditions |
|
| Vol 38, No 4 (2017) |
Article |
Investigation of the influence of high hydrostatic pressure on the abrasive wear of hard-alloy materials |
|
| Vol 38, No 4 (2017) |
Article |
Effect of temperature on wear behavior of high-entropy alloys |
|
| Vol 38, No 4 (2017) |
Article |
Tribodiagnostics of aviation reduction gears according to the stages of the surface fatigue wear for its units |
|
| Vol 38, No 4 (2017) |
Article |
Impact of plasma hardening on the wear resistance of 38XC steel |
|
| Vol 38, No 4 (2017) |
Article |
Ultrasonic machining of engine lubricating oil during tribotechnical testing |
|
| Vol 38, No 4 (2017) |
Article |
Relative statistic fluctuation of sliding friction force |
|
| Vol 38, No 4 (2017) |
Article |
Calculation of contact approach in single microasperity upon reindentation |
|
| Vol 38, No 5 (2017) |
Article |
Improving the lubricating properties of 10W40 oil using oxidized graphite additives |
|
| Vol 38, No 5 (2017) |
Article |
Modification of graphite greases graphene nanostructures |
|
| Vol 38, No 5 (2017) |
Article |
On the kinetics of forming an oxide film for lubrication when cutting steel in a controlled atmosphere |
|
| Vol 38, No 5 (2017) |
Article |
On the experimental techniques for assessing the specific friction force and its parameters |
|
| Vol 38, No 5 (2017) |
Article |
Optimal design of a frictional pair of a hub–plunger |
|
| Vol 38, No 5 (2017) |
Article |
Wear resistance coatings of nickel alloys obtained by supersonic plasma torch |
|
| Vol 38, No 5 (2017) |
Article |
Formation of adhesive bonds under contact rotaprint lubrication |
|
| Vol 39, No 1 (2018) |
Article |
Study of the Performance of Copper Coatings Formed by Electroplating and Deformation Cladding with a Flexible Tool |
|
| Vol 39, No 1 (2018) |
Article |
Calculating Life Spans of Bearings Taking into Consideration the Wear and Failure of PTFE Cages |
|
| Vol 39, No 1 (2018) |
Article |
Contact Stiffness of Machine Components and the Influence of the Microgeometry of the Contact Surfaces on It |
|
| Vol 39, No 1 (2018) |
Article |
Wear Resistance of Amorphous-Crystalline Coatings with Lubricants |
|
| Vol 39, No 1 (2018) |
Article |
Calculated Model of Wedge-Shaped Sliding Support Operating on Lubricating Material |
|
| Vol 39, No 1 (2018) |
Article |
Modeling of Microstructures and Analysis of Abrasive Wear of Arc-Welded Hadfield Steel |
|
| Vol 39, No 2 (2018) |
Article |
Influence of Parameters of Reactive Magnetron Sputtering on Tribomechanical Properties of Protective Nanostructured Ti–Al–N Coatings |
|
| Vol 39, No 2 (2018) |
Article |
The Effect of the Carbon-Fiber Reinforcement of Thermoplastic Fluoropolymers on Their Wear under Heavy Loads |
|
| Vol 39, No 2 (2018) |
Article |
Wear Resistance of Nickel–Cobalt–Polytetrafluoroethylene Composite Electrolytic Coatings Deposited from Chloride-Containing Electrolyte |
|
| Vol 39, No 2 (2018) |
Article |
Influence of the Addition of Vanadium Nitride on the Structure and Specifications of a Diamond–(Fe–Cu–Ni–Sn) Composite System |
|
| Vol 39, No 2 (2018) |
Article |
Effect of the Molecular Weight of Polyarylene Ether Ketones on the Tribological Properties |
|
| Vol 39, No 2 (2018) |
Article |
Regulation of the Tribological Characteristics of Polyester Fabrics by Surface Modification Using Tetrafluoroethylene Telomeres |
|
| Vol 39, No 2 (2018) |
Article |
Study of Friction and Wear Characteristics of the Friction Pair of Centrifugal Brake Rollers |
|
| Vol 39, No 2 (2018) |
Article |
Composition and Tribological Properties of Hardened Cutting Blades of Tillage Machines under Abrasive Deterioration |
|
| Vol 39, No 2 (2018) |
Article |
Triboacoustic Control of Fretting |
|
| Vol 39, No 3 (2018) |
Article |
Investigation of the Structure of Surface and Tribological Properties of Composition Coatings Based on Thermosetting Epoxy–Polyester Resins |
|
| Vol 39, No 3 (2018) |
Article |
A Method for Determining the Convergence under Contact between a Sphere and a Flat Surface of a Workpiece under Small Loads |
|
| Vol 39, No 3 (2018) |
Article |
Investigation of the Adhesive Strength of Antifriction Coatings Depending on the Energy Parameters of Electro-Spark Alloying |
|
| Vol 39, No 3 (2018) |
Article |
The Mathematical Simulation and Study of the Electrical Resistance of the Friction Zone of the Hip Joint Endoprosthesis with a Metal–Metal Friction Pair |
|
| Vol 39, No 3 (2018) |
Article |
Rotor Sealings based on a Metal–Rubber Elastic Porous Material for Turbomachinery |
|
| Vol 39, No 4 (2018) |
Article |
On the Temperature Effect on the Parameters of the Specific Friction Force of Metals |
|
| Vol 39, No 4 (2018) |
Article |
Effect of High-Density Electric Current on Wear and Average Temperature of Steel/Steel Triboelectric Contact |
|
| Vol 39, No 4 (2018) |
Article |
Modification of the Tribocouplings by Spraying Metal Coatings to Improve Their Fretting Resistance |
|
| Vol 39, No 4 (2018) |
Article |
Interaction Mechanisms between Schungite and Friction Surfaces under High-Energy Ball Milling |
|
| Vol 39, No 4 (2018) |
Article |
Impact of Metastable Austenite on the Wear Resistance of Tool Steel |
|
| Vol 39, No 5 (2018) |
Article |
The Effect of PTFE Powder Adhesive Activation on the Wear Resistance of Block PTFE |
|
| Vol 39, No 5 (2018) |
Article |
Tribological and Physicomechanical Properties of Oil-Filled, Phenilon-Based Composites |
|
| Vol 39, No 5 (2018) |
Article |
The Effect of Orienting Carbon Coatings Alloyed with Carbide-Forming Elements on the Antifriction Properties of Lubricants |
|
| Vol 39, No 5 (2018) |
Article |
Effect of Mesomorphism on Lubricating Efficiency of Nanomaterials under Boundary Friction |
|
| Vol 39, No 5 (2018) |
Article |
A Method for Calculating the Frictional Moment in Cageless Bearings |
|
| Vol 39, No 5 (2018) |
Article |
Minimization of the Thermal State of the Hub of a Frictional Pair Using the Criterion of Uniform Temperature Distribution on a Friction Surface |
|
| Vol 39, No 5 (2018) |
Article |
An Abrasive Wear Forecasting Method in the Design of Soil-Cutting Tools |
|
| Vol 39, No 5 (2018) |
Article |
Wear-Resistance, Hardness, and Microstructure of Deposits with a High Chrome Content |
|
| Vol 39, No 6 (2018) |
Article |
Study of the Influence of the Iron Oxide(III) on the Tribotechnical and Vibroacoustic Characteristics of the Frictional Composites for the Stationary Friction Units |
|
| Vol 39, No 6 (2018) |
Article |
Some Specific Features in the Formation of Pressure in Sliding Bearing Clearance |
|
| Vol 39, No 6 (2018) |
Article |
Tribochemical Processes in a Phenol Formaldehyde Polymer Modified by Polyformaldehyde Copolymer |
|
| Vol 39, No 6 (2018) |
Article |
The Influence of Metal Cations of Mechanoactivated Bentonite on Tribochemical Processes in PTFE |
|
| Vol 39, No 6 (2018) |
Article |
Tribological Properties of Dodecaborides of Rare-Earth Metals |
|
| Vol 39, No 6 (2018) |
Article |
Study of Tribological Characteristics of Compatible Materials in Tribosystems of Extruders for Manufacturing Solid Fuel from Biomass |
|
| Vol 39, No 6 (2018) |
Article |
Dispersion Media Based on Aqueous Binary Compositions Modified by PEG-Stearox-6 for Abrasive Metalworking |
|
| Vol 39, No 6 (2018) |
Article |
Viscoelastic Contact of Textured Surfaces |
|
| Vol 39, No 6 (2018) |
Article |
Low-Modulus Carbon Fibers for Antifriction Сarbon Plastics |
|
| Vol 39, No 6 (2018) |
Article |
Wear Mechanism of Elastomers under the Direct Impact of Solid Particles in an Aqueous Medium |
|
| Vol 40, No 1 (2019) |
Article |
The Screening Effect of Ethanol Amines and Cholesteric Liquid Crystal Nanomaterials upon Friction Interaction with Metals in Plastic Lubricants |
|
| Vol 40, No 1 (2019) |
Article |
Influence of the Type of Carbon Fiber Filler on the Physical–Mechanical and Tribological Properties of PTFE Composites |
|
| Vol 40, No 1 (2019) |
Article |
Cardo Copolymers: A Friction–Chemical Structure Relationship |
|
| Vol 40, No 1 (2019) |
Article |
Transition between Modes of Adhesion and Sliding Friction in Contacts of Axially Symmetric Bodies |
|
| Vol 40, No 1 (2019) |
Article |
Procedure to Determine Friction Torque in a Mechanical Membrane Contact Seal |
|
| Vol 40, No 1 (2019) |
Article |
Modeling of External Dynamics of Frictional Interaction Using the Elastic System Stability Theory |
|
| Vol 40, No 1 (2019) |
Article |
Study of the Thermal Resistance of Rough-Surfaced Junctions by Computer-Based Simulation |
|
| Vol 40, No 1 (2019) |
Article |
Evaluation of the Tribotechnical Characteristics of Therma-Barrier Sealing Coatings under Critical Loads |
|
| Vol 40, No 1 (2019) |
Article |
Improving Abrasive Wear Resistance for Steel Hardox 400 by Electro-Spark Deposition |
|
| Vol 40, No 2 (2019) |
Article |
Structure, as well as the Tribological and Mechanical Properties, of Extrudable Polymer-Polymeriс UHMWPE Composites for 3D Printing |
|
| Vol 40, No 2 (2019) |
Article |
Improving the Wear Resistance of Carbon Fiber Reinforced Polyvinylidene Fluoride by the Method of Radiation Modification |
|
| Vol 40, No 2 (2019) |
Article |
Investigation of the Correlation between the Natural Extension Ratio and Abrasive Wear Resistance in Polyethylene |
|
| Vol 40, No 2 (2019) |
Article |
Evaluation Method of Impact and Abrasive Steel Resistance |
|
| Vol 40, No 2 (2019) |
Article |
Tribological and Rheological Properties of Thermally Treated Steel under Reverse Friction |
|
| Vol 40, No 2 (2019) |
Article |
Comparison of Mechanical and Tribological Properties of Nitride and Oxynitride Coatings Based on Chrome and Zirconium Obtained by Cathodic Arc Evaporation |
|
| Vol 40, No 2 (2019) |
Article |
Investigation of the Fracture and Strength of a Compound with a Carbide Base of a Wear-Resistant Ion-Plasma Vacuum-Arc Ti–N, Ti–Al–N, Ti–Al–Cr–N, and Ti–Al–Ni–N Coatings by the Scratch Testing |
|
| Vol 40, No 3 (2019) |
Article |
Evaluating the Applicability of Electrodeformation Placing Technology by a Flexible Tool for Chromeing Hydrocilindes |
|
| Vol 40, No 3 (2019) |
Article |
Modeling the Hydrodynamic Friction Mode on Amsler Type Friction Testing Machines |
|
| Vol 40, No 3 (2019) |
Article |
Powder Bearings with Polymer Inserts |
|
| Vol 40, No 3 (2019) |
Article |
Phase Composition, Mechanical and Tribological Properties of Ti–Al–N System Coatings Deposited by Vacuum-Arc Method |
|
| Vol 40, No 3 (2019) |
Article |
Improving Wear Resistance of Fast-Cutting Steel R6M5 after a Volume Pulse Laser Strength |
|
| Vol 40, No 3 (2019) |
Article |
Calculating the Friction Force at Rest in Joints of Similar Hardness Assembled with Tightness |
|
| Vol 40, No 4 (2019) |
Article |
Friction, Wear, and Monitoring of Heavily Loaded Tribosystems: An Innovative Approach to Studying the Processes |
|
| Vol 40, No 4 (2019) |
Article |
Wear of Composition Coatings Containing SiC–Al2O3 for Piston Skirt of Internal Combustion Engines of Aircraft Ground Support Equipment |
|
| Vol 40, No 4 (2019) |
Article |
Improving the Tribological Properties of Polyethylene Products by Modification with Metal Chelate Complexes |
|
| Vol 40, No 4 (2019) |
Article |
Tribotechnical Characteristics of Commercially Pure Titanium with Different Grain Sizes and TiC and TiO2 Coatings |
|
| Vol 40, No 5 (2019) |
Article |
Sclerometric Investigation of the Process Pressure Effect on the Properties of Polyethylene Nanocomposite Surfaces |
|
| Vol 40, No 5 (2019) |
Article |
Improving the Antifriction Properties of Ceramic Coatings Obtained by the Method of MAO on Aluminum Alloys |
|
| Vol 40, No 5 (2019) |
Article |
Frictional Characteristics of Metal Friction Pairs and the Amontons and Coulomb Friction Laws |
|
| Vol 40, No 5 (2019) |
Article |
Running-in Procedures and Performance Tests for Tribosystems |
|
| Vol 40, No 5 (2019) |
Article |
Theoretical Estimation of The Influence of Plastic Deformation on Average Coefficient of Friction in the Process of Nanostructuring Burnishing of Metal Samples |
|
| Vol 40, No 5 (2019) |
Article |
Interrelation between Tribological and Microstructural Parameters of a Tribomaterial under Cyclic Rolling |
|
| Vol 40, No 5 (2019) |
Article |
Abrasive Wear of an Anchoring Material Based on Modified Birchwood |
|
| Vol 40, No 5 (2019) |
Article |
A Method of Calculating the Friction Moment in Cageless Bearings |
|
| Vol 40, No 5 (2019) |
Article |
Effect of Phosphomolybdates on the Tribological Characteristics of Lubricants |
|
| Vol 40, No 5 (2019) |
Article |
Influence of Current Waveform on the Wear Resistance of Coatings Obtained on VT6 Titanium Alloy with the Electrolytic Plasma Treatment Method |
|
| Vol 40, No 5 (2019) |
Article |
Cavitation-Erosion Wear Resistance of Fluoroplasticics in Model Food Production Media |
|
| Vol 40, No 6 (2019) |
Article |
The Influence of the Roughness of a Steel Counterbody on the Tribological Characteristics of Friction Composites under Friction in Oil |
|
| Vol 40, No 6 (2019) |
Article |
Simulation of Microcontact Interactions during Gas-Abrasive Wearing of Steels with Allowance for Strain Hardening |
|
| Vol 40, No 6 (2019) |
Article |
Abrasive Wear of a Steel Counterbody in Frictional Contact with Pressed Modified Wood |
|
| Vol 40, No 6 (2019) |
Article |
The Antifriction Properties of Amorphous Poly(Arylene Ether Ketone) Copolymers with a Low Content of Cardo Groups |
|
| Vol 40, No 6 (2019) |
Article |
Prospects for the Application of Compound Dampers in Turbomachinery Rotors |
|
| Vol 40, No 6 (2019) |
Article |
Mechanical and Tribological Properties of Polyethylene Terephthalate Track-Etched Membranes after Steam and Radiation Sterilization |
|
| Vol 40, No 6 (2019) |
Article |
Antifriction Properties of Diamond-Like Coating and Titanium Aluminum Nitride in Model Lubricant Media |
|
| Vol 40, No 6 (2019) |
Article |
The Optimal Design of a Friction Unit with Uniform Contact Pressure |
|
| Vol 40, No 6 (2019) |
Article |
Calculating the Contact Approach in a Cylinder upon Reindentation |
|
| Vol 40, No 6 (2019) |
Article |
Mathematical Modeling of the Resistance Force of the Profile of a Flat-Back Knife |
|
| Vol 40, No 6 (2019) |
Article |
Antifriction Nanocomposite Coatings that Contain Magnesium Carbide |
|
| Vol 40, No 6 (2019) |
Article |
Mechanism Wear of Elastomers with Oblique Impact of Solid Particles in the Aqueous Medium |
|
