Improving the Antifriction Properties of Ceramic Coatings Obtained by the Method of MAO on Aluminum Alloys


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The problem of increasing the antifriction properties of oxide-ceramic coatings obtained by microarc oxidation on the surface of aluminum alloys is considered. This problem was solved by the impregnation of oxide-ceramic coatings with solutions of polymers (oligomers), which, upon further heat treatment and polymerization, give the oxide-ceramic coatings antifriction properties. Laboratory tests of the tribotechnical properties of the obtained polymer–ceramic coatings were carried out. The areas of possible practical application of the obtained polymer-ceramic coatings are considered.

作者简介

I. Zlotnikov

Gomel State Technical University

编辑信件的主要联系方式.
Email: z_ai@tut.by
白俄罗斯, Gomel, 246746

V. Shapovalov

Bely Institute of Mechanics of Metal–Polymer Systems

Email: z_ai@tut.by
白俄罗斯, Gomel, 246050

补充文件

附件文件
动作
1. JATS XML

版权所有 © Allerton Press, Inc., 2019