Mathematical Modeling of the Resistance Force of the Profile of a Flat-Back Knife
- Autores: Ageev O.1, Naumov V.1, Fatykhov J.1
-
Afiliações:
- Kaliningrad State Technical University
- Edição: Volume 40, Nº 6 (2019)
- Páginas: 580-587
- Seção: Article
- URL: https://journals.rcsi.science/1068-3666/article/view/229376
- DOI: https://doi.org/10.3103/S1068366619060023
- ID: 229376
Citar
Resumo
Based on the energy approach, the resistance force of a knife profile is presented as the deformational force of friction at the level of the macroscopic scale provided that the surface of the faces is smooth. Mathematical models have been developed for the dimensional and dimensionless resistance forces of the profile considering the normal contact pressures on the inclined faces. The dependence of the dimensional force on the sharpening angle and the thickness of the knife, the rheological properties of muscle tissue, and the cutting speed has been established. The dependence of the dimensionless force on the dimensionless cutting speed and the measure of the elasticity of the muscle tissue has been determined. Expressions for the upper and lower limits of the resistance forces of the profile achieved by varying the cutting speed and the sharpening half-angle have been obtained.
Palavras-chave
Sobre autores
O. Ageev
Kaliningrad State Technical University
Autor responsável pela correspondência
Email: oleg.ageev@klgtu.ru
Rússia, Kaliningrad, 236022
V. Naumov
Kaliningrad State Technical University
Email: oleg.ageev@klgtu.ru
Rússia, Kaliningrad, 236022
J. Fatykhov
Kaliningrad State Technical University
Email: oleg.ageev@klgtu.ru
Rússia, Kaliningrad, 236022