Effect of preliminary ball burnishing on wear resistance of the nitrided VT22 alloy
- Авторлар: Pohrelyuk I.M.1, Fedirko V.M.1, Lavrys S.M.1
-
Мекемелер:
- Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine
- Шығарылым: Том 38, № 3 (2017)
- Беттер: 221-224
- Бөлім: Article
- URL: https://journals.rcsi.science/1068-3666/article/view/228737
- DOI: https://doi.org/10.3103/S1068366617030114
- ID: 228737
Дәйексөз келтіру
Аннотация
The effect of combined treatment on the tribotechnical properties of VT22 titanium alloy has been investigated. The combined treatment consisted of previous cold surface plastic deformation (ball burnishing) and subsequent thermodiffusion saturation of the surface by nitrogen. It was set that, in order to achieve high wear resistance of the VT22–BrAZhN 10-4-4 friction pair, it is necessary to carry out the ball burnishing at small loads, increasing the number of passes before nitriding.
Негізгі сөздер
Авторлар туралы
I. Pohrelyuk
Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine
Хат алмасуға жауапты Автор.
Email: pohrelyuk@ipm.lviv.ua
Украина, Lviv, 79060
V. Fedirko
Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine
Email: pohrelyuk@ipm.lviv.ua
Украина, Lviv, 79060
S. Lavrys
Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine
Email: pohrelyuk@ipm.lviv.ua
Украина, Lviv, 79060
Қосымша файлдар
