Alternative Technology for Creating Nanostructures Using Dip Pen Nanolithography
- Authors: Lukyanenko A.V.1,2, Smolyarova T.E.1,2
-
Affiliations:
- Kirensky Institute of Physics
- Siberian Federal University
- Issue: Vol 52, No 5 (2018)
- Pages: 636-638
- Section: XXV International Symposium “Nanostructures: Physics and Technology”, Saint Petersburg, Russia, June 26–30, 2017. Nanostructure Technology
- URL: https://journals.rcsi.science/1063-7826/article/view/203256
- DOI: https://doi.org/10.1134/S1063782618050202
- ID: 203256
Cite item
Abstract
For modern microelectronics, at the present time, the technologies of consciousness smart structures play an important role, which can provide accuracy, stability and high quality of the structures. Submicron lithography methods are quite expensive and have natural size limitations, not allowing the production of structures with an extremely small lateral limitation. Therefore, an intensive search was conducted for alternative methods for creating submicron resolution structures. Especially attractive one is the possibility of self-organization effects utilization, where the nanostructure of a certain size is formed under the influence of internal forces. The dip pen nanolithography method based on a scanning probe microscope uses a directwrite technology and allows one to carry out a playback of small size structures with high accuracy. In the experiment, a substrate coated with Au (15 nm) using a DPN technique is applied to the polymer to form a desired pattern nano-sized channel. The experiment was conducted using a pointed probe SiN, coated MHA-Acetonitrile, on the Si(111)/Fe3Si/Au structure.
About the authors
A. V. Lukyanenko
Kirensky Institute of Physics; Siberian Federal University
Author for correspondence.
Email: lav@iph.krasn.ru
Russian Federation, Krasnoyarsk, 660036; Krasnoyarsk, 660041
T. E. Smolyarova
Kirensky Institute of Physics; Siberian Federal University
Email: lav@iph.krasn.ru
Russian Federation, Krasnoyarsk, 660036; Krasnoyarsk, 660041