Email this article Optimization of the Parameters of PbSB-based Polycrystalline Photoresistors
- Authors: Miroshnikov B.N.1,2, Miroshnikova I.N.1,2, Popov A.I.1,2
-
Affiliations:
- National Research University, Moscow Power Engineering Institute
- Institute of Nanotechnology of Microelectronics
- Issue: Vol 52, No 2 (2018)
- Pages: 231-235
- Section: Carbon Systems
- URL: https://journals.rcsi.science/1063-7826/article/view/202451
- DOI: https://doi.org/10.1134/S1063782618020082
- ID: 202451
Cite item
Open Access
Access granted
Subscription Access
Abstract
Photosensitive elements based on polycrystalline lead sulfide layers are investigated. The influence of heterogeneous reactions at the crystallite–environment interfaces on the photosensitive-element characteristics is considered. It is shown that heat treatment in vacuum can be used to significantly change the parameters of the as-fabricated structures and optimize them for specific optoelectronic systems. A model is proposed to explain the nature of the observed phenomena.
About the authors
B. N. Miroshnikov
National Research University, Moscow Power Engineering Institute; Institute of Nanotechnology of Microelectronics
Author for correspondence.
Email: MiroshnikovaIN@mpei.ru
Russian Federation, Moscow, 111250; Moscow, 119991
I. N. Miroshnikova
National Research University, Moscow Power Engineering Institute; Institute of Nanotechnology of Microelectronics
Email: MiroshnikovaIN@mpei.ru
Russian Federation, Moscow, 111250; Moscow, 119991
A. I. Popov
National Research University, Moscow Power Engineering Institute; Institute of Nanotechnology of Microelectronics
Email: MiroshnikovaIN@mpei.ru
Russian Federation, Moscow, 111250; Moscow, 119991
