检索

标题
作者
Technological Schemes and Conditions for the Production of Rolling Rings from Hollow As-Cast Blanks
Kostyshev V., Erisov Y.
In situ formation of the composite structure of a eutectic Nb–Si alloy during directional solidification in a liquid-metal coolant
Bondarenko Y., Echin A., Kolodyazhnyi M.
Effect of Additional Hydrogen Alloying on the Structure and the Phase Composition of a VTI-4 Intermetallic Alloy
Skvortsova S., Pozhoga O., Pozhoga V., Ivanov A.
Structure and magnetic properties of the Nd9.5Fe84.5B6 alloy subjected to severe plastic deformation and annealing
Menushenkov V., Shchetinin I., Chernykh S., Savchenko A., Gorshenkov M., Zhukov D.
Microstructure and Mechanical Properties of Light Cellular Constructions Made of a VT6 Alloy by Selective Laser Melting
Sufiyarov V., Borisov E., Polozov I., Sokolova V., Popovich A.
Microstructure of the Joint of 1565chM Alloy Sheets Fabricated by Friction Stir Welding
Ovchinnikov V., Badall N.
Effect of the phase composition on the properties of a complex magnesium alloy at temperatures from –70 to +300°C
Volkova E., Duyunova V., Mostyaev I.
Structure and Tribological Properties of B83 Babbit–Based Composite Rods and the Coatings Produced from Them by Arc Surfacing
Bolotova L., Kalashnikov I., Kobeleva L., Katin I., Kolmakov A., Mikheev R., Kobernik N., Podymova N.
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: II. Oxidation
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Alad’ev N., Sirotinkin V.
Effect of deformation and heat treatment on the structure, the mechanical properties, and the fracture characteristics of an ultrafine-grained Zr–1Nb alloy
Vinokurov V., Grabovetskaya G., Stepanova E., Mishin I.
Formation of Gradient Structures in the Zone of Joining a Deformable Nickel Alloy and a Single-Crystal Intermetallic Alloy during Thermodiffusion Pressure Welding and Subsequent Heat Treatment
Povarova K., Valitov V., Drozdov A., Bazyleva O., Galieva E., Arginbaeva E.
Structure and Mechanical Properties of the Layered Composites Made of Multicomponent Niobium Alloys and Hardening Silicon–Carbon Compounds Formed by Solid-Phase Sintering
Korzhov V., Kiiko V., Zheltyakova I.
Mechanical Properties and Structure of Grade 1151 Aluminum Alloy Joints Formed by Argon-Arc Welding and Friction Stir Welding
Solov’eva I., Davydenko L., Ovchinnikov V.
Texture, Structure, Mechanical Properties, and Deformability of MA2-1pch Magnesium Alloy Rolled Sheets Preliminarily Subjected to Direct Extrusion or Equal-Channel Angular Pressing and Annealing
Serebryanyi V., Khar’kova M., Luk’yanova E., Karelin F.
Effect of the Cobalt Content and Chromium Alloying on the Structure of the Scale Formed on Structural β-NiAl + γ'-Ni3Al + γ-Ni Alloys (Ni–Al–Co System) at 1300°C
Drozdov A., Povarova K., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Bulakhtina M., Ashmarin A.
Effect of the Deformation during Pressure Welding of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy on the Structure and Properties of the Welded Joints
Drozdov A., Povarova K., Valitov V., Bazyleva O., Galieva E., Bulakhtina M., Arginbaeva E.
Structure and Properties of the Solid-Phase Joints of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy Formed by Pressure Welding at a Strain of 24% under the Superplasticity of the EP975 Alloy
Galieva E., Povarova K., Drozdov A., Valitov V.
Structure and Mechanical and Corrosion Properties of a Magnesium Mg–Y–Nd–Zr Alloy after High Pressure Torsion
Lukyanova E., Martynenko N., Serebryany V., Belyakov A., Rokhlin L., Dobatkin S., Estrin Y.
1 - 18 的 18 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##