检索

标题
作者
Application of DAFS for the Estimation of the Elemental Composition of Tool Nanostructures
Kovalev A., Lobanova E., Zavozin V.
Columnar-to-equiaxed transition during the solidification of a Ti–10V–2Fe–3Al alloy
Leder M., Kondrashov E.
Structure formation in grade 20 steel during equal-channel angular pressing and subsequent heating
Dobatkin S., Odesskii P., Raab G., Tyutin M., Rybalchenko O.
Microstructure and Mechanical Properties of Light Cellular Constructions Made of a VT6 Alloy by Selective Laser Melting
Sufiyarov V., Borisov E., Polozov I., Sokolova V., Popovich A.
Causes and Mechanisms of Fracture of a Main Line Section Made of 17G1S Steel
Goritskii V., Shneiderov G., Durneva A.
Formation of Gradient Structure–Phase States in the Surface Layers of 100-m Differentially Quenched Rails
Gromov V., Yur’ev A., Ivanov Y., Morozov K., Konovalov S., Peregudov O.
Sixteenth International Conference on High Temperature Materials Chemistry (HTMC-XVI)
Sidorov V., Dubinin N., Polovov I., Nikitina E.
Microstructure of the Joint of 1565chM Alloy Sheets Fabricated by Friction Stir Welding
Ovchinnikov V., Badall N.
Formation of a Intermediate Order in Metallic Glasses and a Long Order in Nanocrystalline Alloys with Allowance for the Character of Binding and the Transformation of the Short Order in a Melt
Polukhin V., Kurbanova E., Vatolin N.
Homogenization Processes in Single-Crystal and Granular ZhS32-VI High-Temperature Alloys
Orlov M., Petrushin N., Evgenov A., Karachevtsev F.
Effect of the phase composition on the properties of a complex magnesium alloy at temperatures from –70 to +300°C
Volkova E., Duyunova V., Mostyaev I.
Nanoscale localization of plastic deformation in steel with a bainitic structure
Ivanov Y., Gromov V., Glezer A., Nikitina E., Aksenova K.
Machining technological media used for chamber multispindle machining of parts made of powder materials
Skryabin V., Skhirtladze A.
Structure and Tribological Properties of the Wear-Resistant Coatings Deposited Using Flux-Cored Wires Modified by Tantalum and Tungsten
Vinokurov G., Vasil’eva M., Kychkin A., Moskvitina L.
Structure and Electroerosion Resistance of the Ag–CuO Coating Prepared by Electroexplosive Sputtering on Copper Electrical Contacts
Romanov D., Moskovskii S., Gromov V., Sosnin K., Filyakov A.
Effect of Temperature on the Low-Cycle Fatigue Characteristics of Single Crystals Made of an Ni3Al-Based Rhenium-Containing Intermetallic Alloy
Povarova K., Bazyleva O., Gorbovets M., Drozdov A., Bulakhtina M.
Effect of a Thermomechanical Action on the Structure and the Mechanical Properties of the Welded Joints of a Hot-Rolled Austenitic Nitrogen-Bearing Steel
Kostina M., Kostina V., Muradyan S.
Development of a Commercial Technology for Plasma Arc Remelting of a Nitrogen-Bearing 05Kh21AG15N8MF Steel
Sisev A., Tsimerman S., Kostina M., Il’inskii A., Perkas M., Rigina L.
Structure and Tribological Properties of B83 Babbit–Based Composite Rods and the Coatings Produced from Them by Arc Surfacing
Bolotova L., Kalashnikov I., Kobeleva L., Katin I., Kolmakov A., Mikheev R., Kobernik N., Podymova N.
Directional Solidification, Structure, and Mechanical Properties of a Eutectic Nb–Si Alloy with a Natural Composite Structure for GTE Blades
Bondarenko Y., Echin A., Kolodyazhnyi M., Narskii A.
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: II. Oxidation
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Alad’ev N., Sirotinkin V.
Effect of deformation and heat treatment on the structure, the mechanical properties, and the fracture characteristics of an ultrafine-grained Zr–1Nb alloy
Vinokurov V., Grabovetskaya G., Stepanova E., Mishin I.
Electron-beam deposition of chromium carbide–based coatings with an ultradispersed structure or a nanostructure
Poletika I., Ivanov S., Gnyusov S., Perovskaya M.
Structure and Mechanical Properties of the Molybdenum–Steel Bimetal Fabricated by Hot Isostatic Pressing
Makhina D., Denisov V., Perminova Y., Butrim V., Nikulin S.
Effect of a Structure and Test Conditions on the Critical Strains and Stresses in Titanium Nickelide-Based Alloys
Gusev D., Kollerov M., Vinogradov R.
1 - 25 的 78 信息 1 2 3 4 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##