Поиск

Выпуск
Название
Авторы
Том 2019, № 13 (2019)
Application of DAFS for the Estimation of the Elemental Composition of Tool Nanostructures
Kovalev A., Lobanova E., Zavozin V.
PDF
(Eng)
Том 2016, № 12 (2016)
Columnar-to-equiaxed transition during the solidification of a Ti–10V–2Fe–3Al alloy
Leder M., Kondrashov E.
PDF
(Eng)
Том 2016, № 11 (2016)
Structure formation in grade 20 steel during equal-channel angular pressing and subsequent heating
Dobatkin S., Odesskii P., Raab G., Tyutin M., Rybalchenko O.
PDF
(Eng)
Том 2019, № 13 (2019)
Microstructure and Mechanical Properties of Light Cellular Constructions Made of a VT6 Alloy by Selective Laser Melting
Sufiyarov V., Borisov E., Polozov I., Sokolova V., Popovich A.
PDF
(Eng)
Том 2019, № 10 (2019)
Causes and Mechanisms of Fracture of a Main Line Section Made of 17G1S Steel
Goritskii V., Shneiderov G., Durneva A.
PDF
(Eng)
Том 2019, № 7 (2019)
Formation of Gradient Structure–Phase States in the Surface Layers of 100-m Differentially Quenched Rails
Gromov V., Yur’ev A., Ivanov Y., Morozov K., Konovalov S., Peregudov O.
PDF
(Eng)
Том 2019, № 2 (2019)
Sixteenth International Conference on High Temperature Materials Chemistry (HTMC-XVI)
Sidorov V., Dubinin N., Polovov I., Nikitina E.
PDF
(Eng)
Том 2018, № 6 (2018)
Microstructure of the Joint of 1565chM Alloy Sheets Fabricated by Friction Stir Welding
Ovchinnikov V., Badall N.
PDF
(Eng)
Том 2018, № 2 (2018)
Formation of a Intermediate Order in Metallic Glasses and a Long Order in Nanocrystalline Alloys with Allowance for the Character of Binding and the Transformation of the Short Order in a Melt
Polukhin V., Kurbanova E., Vatolin N.
PDF
(Eng)
Том 2017, № 12 (2017)
Homogenization Processes in Single-Crystal and Granular ZhS32-VI High-Temperature Alloys
Orlov M., Petrushin N., Evgenov A., Karachevtsev F.
PDF
(Eng)
Том 2017, № 9 (2017)
Effect of the phase composition on the properties of a complex magnesium alloy at temperatures from –70 to +300°C
Volkova E., Duyunova V., Mostyaev I.
PDF
(Eng)
Том 2017, № 4 (2017)
Nanoscale localization of plastic deformation in steel with a bainitic structure
Ivanov Y., Gromov V., Glezer A., Nikitina E., Aksenova K.
PDF
(Eng)
Том 2016, № 13 (2016)
Machining technological media used for chamber multispindle machining of parts made of powder materials
Skryabin V., Skhirtladze A.
PDF
(Eng)
Том 2019, № 13 (2019)
Structure and Tribological Properties of the Wear-Resistant Coatings Deposited Using Flux-Cored Wires Modified by Tantalum and Tungsten
Vinokurov G., Vasil’eva M., Kychkin A., Moskvitina L.
PDF
(Eng)
Том 2019, № 10 (2019)
Structure and Electroerosion Resistance of the Ag–CuO Coating Prepared by Electroexplosive Sputtering on Copper Electrical Contacts
Romanov D., Moskovskii S., Gromov V., Sosnin K., Filyakov A.
PDF
(Eng)
Том 2019, № 7 (2019)
Effect of Temperature on the Low-Cycle Fatigue Characteristics of Single Crystals Made of an Ni3Al-Based Rhenium-Containing Intermetallic Alloy
Povarova K., Bazyleva O., Gorbovets M., Drozdov A., Bulakhtina M.
PDF
(Eng)
Том 2019, № 1 (2019)
Effect of a Thermomechanical Action on the Structure and the Mechanical Properties of the Welded Joints of a Hot-Rolled Austenitic Nitrogen-Bearing Steel
Kostina M., Kostina V., Muradyan S.
PDF
(Eng)
Том 2018, № 6 (2018)
Development of a Commercial Technology for Plasma Arc Remelting of a Nitrogen-Bearing 05Kh21AG15N8MF Steel
Sisev A., Tsimerman S., Kostina M., Il’inskii A., Perkas M., Rigina L.
PDF
(Eng)
Том 2018, № 1 (2018)
Structure and Tribological Properties of B83 Babbit–Based Composite Rods and the Coatings Produced from Them by Arc Surfacing
Bolotova L., Kalashnikov I., Kobeleva L., Katin I., Kolmakov A., Mikheev R., Kobernik N., Podymova N.
PDF
(Eng)
Том 2017, № 12 (2017)
Directional Solidification, Structure, and Mechanical Properties of a Eutectic Nb–Si Alloy with a Natural Composite Structure for GTE Blades
Bondarenko Y., Echin A., Kolodyazhnyi M., Narskii A.
PDF
(Eng)
Том 2017, № 9 (2017)
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: II. Oxidation
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Alad’ev N., Sirotinkin V.
PDF
(Eng)
Том 2017, № 4 (2017)
Effect of deformation and heat treatment on the structure, the mechanical properties, and the fracture characteristics of an ultrafine-grained Zr–1Nb alloy
Vinokurov V., Grabovetskaya G., Stepanova E., Mishin I.
PDF
(Eng)
Том 2016, № 13 (2016)
Electron-beam deposition of chromium carbide–based coatings with an ultradispersed structure or a nanostructure
Poletika I., Ivanov S., Gnyusov S., Perovskaya M.
PDF
(Eng)
Том 2019, № 10 (2019)
Structure and Mechanical Properties of the Molybdenum–Steel Bimetal Fabricated by Hot Isostatic Pressing
Makhina D., Denisov V., Perminova Y., Butrim V., Nikulin S.
PDF
(Eng)
Том 2019, № 4 (2019)
Effect of a Structure and Test Conditions on the Critical Strains and Stresses in Titanium Nickelide-Based Alloys
Gusev D., Kollerov M., Vinogradov R.
PDF
(Eng)
1 - 25 из 78 результатов 1 2 3 4 > >> 
Подсказки:
  • Ключевые слова чувствительны к регистру
  • Английские предлоги и союзы игнорируются
  • По умолчанию поиск проводится по всем ключевым словам (агенс AND экспериенцер)
  • Используйте OR для поиска того или иного термина, напр. образование OR обучение
  • Используйте скобки для создания сложных фраз, напр. архив ((журналов OR конференций) NOT диссертаций)
  • Для поиска точной фразы используйте кавычки, напр. "научные исследования"
  • Исключайте слово при помощи знака - (дефис) или оператора NOT; напр. конкурс -красоты или же конкурс NOT красоты
  • Используйте * в качестве версификатора, напр. научн* охватит слова "научный", "научные" и т.д.

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах