Email this article Machining technological media used for chamber multispindle machining of parts made of powder materials
- Authors: Skryabin V.A.1, Skhirtladze A.G.2
-
Affiliations:
- Penza State University
- Moscow State Technological University Stankin
- Issue: Vol 2016, No 13 (2016)
- Pages: 1287-1291
- Section: Combined Methods of Treatment
- URL: https://journals.rcsi.science/0036-0295/article/view/171157
- DOI: https://doi.org/10.1134/S003602951613022X
- ID: 171157
Cite item
Open Access
Access granted
Subscription Access
Abstract
The machining of parts made of powder materials by densified dispersed abrasive media is experimentally studied. The role of lubricant-cooling agents in polishing and their influence on the efficiency and quality of machining is considered.
About the authors
V. A. Skryabin
Penza State University
Email: vs_51@list.ru
Russian Federation, ul. Krasnaya 40, Penza, 440026
A. G. Skhirtladze
Moscow State Technological University Stankin
Author for correspondence.
Email: vs_51@list.ru
Russian Federation, Vadkovskii per. 1, Moscow, 127055
