Поиск

Выпуск
Название
Авторы
Том 2019, № 13 (2019)
Mass Transfer of a Nanocrystalline 5BDSR Alloy during Low-Voltage Electrospark Treatment
Kuznetsov I., Kolomeichenko A.
PDF
(Eng)
Том 2019, № 10 (2019)
Amorphous-Alloy-Based Composites Prepared by High-Pressure Torsion
Permyakova I., Blinova E., Shchetinin I., Savchenko E.
PDF
(Eng)
Том 2019, № 2 (2019)
Structure of the Al90Y10 Alloy Formed upon Pressure Solidification
Menshikova S., Shirinkina I., Brodova I., Brazhkin V.
PDF
(Eng)
Том 2018, № 11 (2018)
Effect of the Cobalt Content and Chromium Alloying on the Structure of the Scale Formed on Structural β-NiAl + γ'-Ni3Al + γ-Ni Alloys (Ni–Al–Co System) at 1300°C
Drozdov A., Povarova K., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Bulakhtina M., Ashmarin A.
PDF
(Eng)
Том 2018, № 6 (2018)
Properties of the Coatings Fabricated by Plasma-Jet Hard-Facing by Dispersed Mechanical Engineering Wastes
Latypov R., Ageev E., Latypova G., Altukhov A., Ageeva E.
PDF
(Eng)
Том 2018, № 1 (2018)
Structure and Tribological Properties of B83 Babbit–Based Composite Rods and the Coatings Produced from Them by Arc Surfacing
Bolotova L., Kalashnikov I., Kobeleva L., Katin I., Kolmakov A., Mikheev R., Kobernik N., Podymova N.
PDF
(Eng)
Том 2017, № 12 (2017)
Experience of Application of EBW in Producing Welded VT41 Alloy Drums in the Design of an HPC in an Advanced Engine
Bykov Y., Fomichev E., Kashapov O., Kyaramyan K.
PDF
(Eng)
Том 2017, № 9 (2017)
Structural heat-resistant β-NiAl + γ′-Ni3Al alloys of the Ni–Al–Co system: II. Oxidation
Povarova K., Drozdov A., Bazyleva O., Morozov A., Antonova A., Arginbaeva E., Alad’ev N., Sirotinkin V.
PDF
(Eng)
Том 2017, № 4 (2017)
Effect of deformation and heat treatment on the structure, the mechanical properties, and the fracture characteristics of an ultrafine-grained Zr–1Nb alloy
Vinokurov V., Grabovetskaya G., Stepanova E., Mishin I.
PDF
(Eng)
Том 2016, № 10 (2016)
Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting
Gerov M., Vladislavskaya E., Terent’ev V., Prosvirnin D., Kolmakov A., Antonova O.
PDF
(Eng)
Том 2019, № 13 (2019)
Elemental Composition and Microhardness of the Coatings Prepared on Faced Aluminum Alloys by Plasma Electrolytic Oxidation in a Silicate–Alkaline Electrolyte
Kolomeichenko A., Kravchenko I.
PDF
(Eng)
Том 2019, № 10 (2019)
Effect of Thermohydrogen Treatment on the Manufacturing and Mechanical Properties of a Heat-Resistant VTI-4 Intermetallic Alloy
Skvortsova S., Pozhoga O., Ovchinnikov A., Orlov A.
PDF
(Eng)
Том 2019, № 6 (2019)
Conditions of Air Shot Hardening of VT41 Titanium Alloy Blisk Blades for an Advanced Engine
Yakovlev M., Kyaramyan K., Shirvan’yants G.
PDF
(Eng)
Том 2018, № 11 (2018)
Structure and Properties of the Solid-Phase Joints of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy Formed by Pressure Welding at a Strain of 24% under the Superplasticity of the EP975 Alloy
Galieva E., Povarova K., Drozdov A., Valitov V.
PDF
(Eng)
Том 2018, № 6 (2018)
Effect of the Heat-Treatment Conditions on the Structure and Mechanical Properties of the Base and Weld Materials of the VT41 Alloy Blisks in the HPC of an Advanced Engine
Nochovnaya N., Kashapov O., Bykov Y., Kyaramyan K.
PDF
(Eng)
Том 2018, № 4 (2018)
Phase Composition, Texture, and Residual Stresses in Al–Cu–Li Friction Stir Welds
Betsofen S., Lukin V., Dolgova M., Panteleev M., Kabanova Y.
PDF
(Eng)
Том 2018, № 1 (2018)
Formation of Gradient Structures in the Zone of Joining a Deformable Nickel Alloy and a Single-Crystal Intermetallic Alloy during Thermodiffusion Pressure Welding and Subsequent Heat Treatment
Povarova K., Valitov V., Drozdov A., Bazyleva O., Galieva E., Arginbaeva E.
PDF
(Eng)
Том 2017, № 11 (2017)
Electrochemical Behavior of an Amorphous and Nanocrystalline Fe79P13Si5V3 Alloy in a Damp SO2-Contaminated Atmosphere
Vavilova V., Korneev V., Gavrilov D., Anosova M.
PDF
(Eng)
Том 2017, № 7 (2017)
Solidification of the eutectic Sn–43 mol % Bi alloy
Aleksandrov V., Frolova S., Zozulya A.
PDF
(Eng)
Том 2017, № 3 (2017)
Solid-state oxidation kinetics of an yttrium-containing AK1M2 alloy
Berdiev A., Ganiev I., Niezov K.
PDF
(Eng)
Том 2016, № 8 (2016)
Choice of quenching temperature and its effect on the structure and properties of a high-strength grade 01979 aluminum alloy
Kuptsov S., Elantsev A., Nikonenko E., Nikitina E.
PDF
(Eng)
Том 2019, № 12 (2019)
Simulation of the Heat Treatment of the Welded Joints in a High-Pressure Compressor
Kyaramyan K., Lomberg B., Bakradze M., Isaev D., Bykov Y., Mazalov I.
PDF
(Eng)
Том 2019, № 10 (2019)
Evolution of the Multiscale Hierarchical Structure of Defects in a Melt-Quenched Fe70Cr15B15(Sn) Alloy during Low-Temperature Annealing
Pisarenko T., Frolov A., Krainova G.
PDF
(Eng)
Том 2019, № 5 (2019)
Development of Fatigue Damages in a Pseudo-α-Titanium Alloy after Intense Thermomechanical Treatment
Bagmutov V., Vodop’yanov V., Zakharov I., Vdovenko A., Romanenko M., Chekunov V.
PDF
(Eng)
Том 2019, № 2 (2019)
Influence of Niobium and Tantalum on the Phase Formation during the Metallothermic Interaction of Aluminum with Titanium Dioxide
Osinkina T., Krasikov S., Zhilina E., Agafonov S., Vedmid’ L., Zhidovinova S.
PDF
(Eng)
51 - 75 из 94 результатов << < 1 2 3 4 > >> 
Подсказки:
  • Ключевые слова чувствительны к регистру
  • Английские предлоги и союзы игнорируются
  • По умолчанию поиск проводится по всем ключевым словам (агенс AND экспериенцер)
  • Используйте OR для поиска того или иного термина, напр. образование OR обучение
  • Используйте скобки для создания сложных фраз, напр. архив ((журналов OR конференций) NOT диссертаций)
  • Для поиска точной фразы используйте кавычки, напр. "научные исследования"
  • Исключайте слово при помощи знака - (дефис) или оператора NOT; напр. конкурс -красоты или же конкурс NOT красоты
  • Используйте * в качестве версификатора, напр. научн* охватит слова "научный", "научные" и т.д.

Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах